• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.259-264
• /
• 2005

In this paper, we generalize the software reliability growth model by assuming that the testing cost and maintenance cost are random and adopts the Bayesian approach to determine the optimal software release time. Numerical examples are provided to illustrate the Bayesian method for certain parametric models.

• 산업공학
• /
• 제21권1호
• /
• pp.75-84
• /
• 2008

It is a difficult task for decision makers(DMs) to choose an appropriate release plan which balances the conflicts between water storage and hydro-electric energy generation in a multi-reservoir operation problem. In this study, we proposed a DEA-based ranking procedure by which the DM can rank the potential alternatives and select the best solution among the Pareto-optimal solutions. The proposed procedure can resolve the problem of mix inefficiency that may cause errors in measuring the efficiency of alternatives. We applied the proposed procedure to the multi-reservoir operation problem for the Geum-River basin and could choose the best efficient solution from the Pareto-set which were generated by the Coordinated Multi-Reservoir Operating Model.

• KSBB Journal
• /
• 제14권1호
• /
• pp.71-75
• /
• 1999

인 축적능이 우수한 균주를 자연계로부터 위노그라드스키 칼럼을 이용해 분리하여 Acinetobacter 속으로 동정하였고, Aci-netobacter CW3로 망명하였다. 인 축적균주의 배양초기조건은 $20^{\circ}C$. pH 7, 200rpm, 18.5mg $FO_4-P/\ell$가 최적임을 보였다. Acinetobacter CW3은 회분배양에서는 최적조건에서 12시간만에 인의 제거가 완료되었다. 이 균주는 호기조건에서는 인을 균주 내부에 과량 축적하고 첨가조건에서 인을 다시 방출함을 보였다.

• 정보교육학회논문지
• /
• 제2권1호
• /
• pp.35-51
• /
• 1998

Software reliability growth model is one of the evaluation methods, software quality which quantitatively calculates the software reliability based on the number of errors detected. For correct and precise evaluation of reliability of certain software, the reliability model, which is considered to fit dose to real data should be selected as well. In this paper, the optimal model for specific test data was selected one of among five software reliability growth models based on NHPP(Non Homogeneous Poission Process), and in result reliability estimating scales(total expected number of errors, error detection rate, expected number of errors remaining in the software, reliability etc) could obtained. According to reliability estimating scales obtained, Software development and predicting optimal release point and finally in conducting systematic project management.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.794-796
• /
• 1997

The superconducting magnetic energy storage (SMES) system is considered to be useful to charge or release an energy in power system because of the high efficiency and quick response. But we need much capital to construct and to operate a SMES. A site and capacity of SMES are important elements for effective operating and planning. In this paper, we proposed a performance function to determine an optimal site and capacity of SMES according to variety condition of power system such as fault point. In addition, to demonstrate the validity of a proposed method, the simulations were carried out on two-machine 5-bus system.

• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.21-54
• /
• 2012

As we know every software development process is pretty large and consists of different modules. This raises the idea of prioritizing different software modules so that important modules can be tested by preference. In the software testing process, it is not possible to test each and every module regressively, which is due to time and cost constraints. To deal with these constraints, this paper proposes an approach that is based on the fuzzy multi-criteria approach for prioritizing several software modules and calculates optimal time and cost for software testing by using fuzzy logic and the fault tolerance approach.

• 폴리머
• /
• 제34권3호
• /
• pp.269-273
• /
• 2010

본 연구는 염산 알푸조신의 서방화를 위한 과립제의 최적 구성을 찾기 위해 수행되었으며, 이에 따라 고분자의 점도에 따른 염산 알푸조신 과립정제를 제조하였다. 사용된 고분자는 경구를 통한 약물전달 시스템 설계에 가장 널리 사용되는 하이드록시프로필메틸셀룰로오스(HPMC)이며, HPMC의 팽윤성은 가장 중요한 특성으로 약물의 방출에 큰 영향을 미친다. 염산 알푸조신 과립정제의 구조변화를 확인하기 위하여 적외선분광법(FTIR)을 분석하였으며, 결정학적 특성을 알아보기 위해 X선 회절분석법(XRD)을 이용하여 분석하였다. 과립정제를 제조하여 인공장액에서의 방출거동을 알아보았으며, 본 연구를 통해 첨가제로 사용된 HPMC의 점도에 따라 모델약물인 염산 알푸조신의 방출거동을 조절할 수 있었다.

• 한국농공학회논문집
• /
• 제49권5호
• /
• pp.11-20
• /
• 2007

In this study, we reviewed the optimal space for the fishway and fish storage establishment in the section between the downstream of the Hwacheon dam and the confluence of the Pungsan river. The hydraulic stability of these facilities was also examined. In the section between the downstream of Hwacheon dam and the confluence of Pungsan river, the release flow of Hwacheon dam was set at $5,495m^3/s,\;6,110m^3/s$ and $7,537m^3/s$, and numerical simulations were executed for each instance using the HEC-RAS model and RMA-2. In the analysis of the flow velocity distributions in the subject section by release flows of Hwacheon dam, it was shown that there was over 5.0m/s of high flow velocity at Sta. $#1{\sim}Sta.$ #3, Sta. $#4{\sim}Sta.$ #6, and Sta. $#12{\sim}Sta.$ #13 of the sections analyzed in this study. The Sta. $#0{\sim}Sta.$ #1 was considered appropriate for the fishway and fish storage establishment. As seen in the results of the numerical stability review by release flow conditions of Hwacheon dam subject to the selected available areas fur fishway and fish storage, the topographically available section for the establishment of fishway and fish storage exists at Sta. $#1{\sim}Sta.$ #3 when the release flow of Hwacheon dam is $5,495m^3/s$, whereas Sta. $#0{\sim}Sta.$ #1 should be reviewed for the subject section for the establishment of fishway at release flows of $6,110m^3/s$ and $7,537m^3/s$, in addition to the figures gathered at the $5,495m^3/s$ release flow. Finally, the available section for the establishment of fishway and fish storage was determined to be Sta. $#0{\sim}Sta.$ #3. Further, if fishway and fish storage are established in the outer bank within this section, the high flow velocity section should be avoided. An alternative would be to establish for the fishway in the inner band on the section of Sta. #1 or Sta. #3.

• 한국환경농학회지
• /
• 제42권2호
• /
• pp.112-120
• /
• 2023

Methane (CH₄) and nitrous oxide (N₂O) are significant contributors to greenhouse gas (GHG) emissions from rice fields. Mid-summer drainage is a commonly practiced water management technique that reduces CH₄ emissions from rice fields. Slow-release fertilizers gradually release nutrients over an extended period and have been shown to reduce N₂O emissions. However, the combined effect of slow-release fertilizer and water management on GHG emissions remains unclear. This study compared GHG emissions from a rice paddy subjected to mid-summer drainage for 10 days (control) with that of a rice paddy subjected to prolonged mid-summer drainage for 20 days combined with slow-release fertilizer (W+S). Gas sampling was conducted weekly using a closed chamber method. During the rice cultivation period, cumulative CH₄ and N₂O emissions were reduced by 12.3% and 16.2%, respectively, in the W+S treatment compared to the control. Moreover, the W+S treatment exhibited a 1.9% increase in grain yield compared to the control. Under experimental conditions, slow-release fertilizers, in combination with prolonged mid-summer drainage, proved to be the optimal approach for achieving high crop yield while reducing GHG emissions. This represents an effective strategy to mitigate GHG emissions from rice paddy fields.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1616-1623
• /
• 2000

A diaphragm spring is an important component of a clutch assembly, characteristics of which depends largely on that of a diaphragm spring. A diaphragm spring is subject to high stress concentration in driving condition, which frequently causes cracks and fracture around finger area. In this paper, behavior of a diaphragm spring is analysed by finite element method to calculate sensitivity of design parameters, which is used to perform optimal design of diaphragm spring shape. As an object function, hoop stresses are taken and minimized to improve durability. Characteristics of the diaphragm is used as equality constraint to maintain the original design purpose and sequential linear programming(SLP) is utilized as an optimization tool. With optimized design, it is verified that concentrated stress is decreased maintaining release load characteristic.