• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.5
• /
• pp.520-525
• /
• 2014

When the PCF (Point Coordinated Function) MAC protocol is combined with the frame aggregation method to enhance the MAC performance in IEEE 802.11 wireless LANs, the formulae for the optimal frame aggregation level for best PCF MAC performance were derived in our previous study. We extend the formulae for the PCF protocol to derive the optimal frame aggregation level for the connectivity-based multipolling MAC protocol in IEEE 802.11 wireless LANs. By simulations, we compare the performances of IEEE 802.11 wireless LANs with the optimal and random frame aggregation levels. Compared with the random frame aggregation level, the optimal frame aggregation level significantly improves the performance of IEEE 802.11 wireless LANs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.1004-1014
• /
• 2007

In sensor networks, it is crucial to reliably and energy-efficiently deliver sensed information from each source to a sink node. Specifically, in mobile sink (user) applications, due to the sink mobility, a stationary dissemination path may no longer be effective. The path will have to be continuously reconfigured according to the current location of the sink. Moreover, the dynamic optimal path from each source to the sink is required in order to reduce end-to-end delay and additional energy wastage. In this paper, an Adaptive Reversal Optimal path Tree (AROT) protocol is proposed. Information delivery from each source to a mobile sink can be easily achieved along the AROT without additional control overhead, because the AROT proactively performs adaptive sink mobility management. In addition, the dynamic path is optimal in terms of hop counts and the AROT can maintain a robust tree structure by quickly recovering the partitioned tree with minimum packet transmission. Finally, the simulation results demonstrate that the AROT is a considerably energy-efficient and robust protocol.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.526-532
• /
• 2014

In this paper, we present and analyze a LQ (Linear Quadratic) inverse optimal state-consensus protocol for continuous-time multi-agent systems with undirected graph topology. By Lyapunov analysis of the state-consensus error dynamics, we show the sufficient conditions on the algebraic connectivity of the graph to guarantee LQ inverse optimality and closed-loop stability. A more relaxed stability condition is also provided in terms of the algebraic connectivity. Finally, a formation control protocol for multiple mobile robots is proposed based on the target LQ inverse optimal consensus protocol, and the simulation results are provided to verify the performance of the proposed LQ inverse formation control method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.434-441
• /
• 2015

In this paper, we propose an inverse optimal distributed protocol for the formation and velocity consensus of nonholonomic mobile robots. The communication among mobile robots is described by a simple undirected graph, and the mobile robots' kinematics are considered. The group of mobile robots driven by the proposed protocols asymptotically achieves the desired formation and group velocity in an inverse optimal fashion. The design of the protocols is based on dynamic feedback linearization and the proposed linear quadratic (LQ) inverse optimal second-order consensus protocol. A numerical simulation is given to verify the effectiveness of the proposed scheme.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2006

A modified PCF(Point Coordination Function) protocol with the optimal polling sequence is defined in detail and shown to improve the efficiency of the conventional PCF protocol in IEEE 802.11 wireless LAN standard. The problem for the optimal polling sequence is formulated as TSP(Travelling Salesman Problem) with the distance values of 1's or 0's. Numerical examples show that the optimal polling sequence increases the capacity of the real-time service such as VoIP(Voice over Internet Protocol).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3018-3036
• /
• 2013

In this paper, we investigate power allocation scheme and outage performance for a physical-layer network coding (PNC) relay based secondary user (SU) communication in cognitive multi-antenna relay networks (CMRNs), in which two secondary transceivers exchange their information via a multi-antenna relay using PNC protocol. We propose an optimal energy-efficient power allocation (OE-PA) scheme to minimize total energy consumption per bit under the sum rate constraint and interference power threshold (IPT) constraints. A closed-form solution for optimal allocation of transmit power among the SU nodes, as well as the outage probability of the cognitive relay system, are then derived analytically and confirmed by numerical results. Numerical simulations demonstrate the PNC protocol has superiority in energy efficiency performance over conventional direct transmission protocol and Four-Time-Slot (4TS) Decode-and-Forward (DF) relay protocol, and the proposed system has the optimal outage performance when the relay is located at the center of two secondary transceivers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.215-223
• /
• 2008

Retransmission signals from relays to destination when the destination fails to decode received signal from the source in Automatic Repeat Request (ARQ) protocol make the destination receive signals more reliably. With using omni -direction antenna in the practical system, in communication range of both the source antenna and the destination antenna, there are some relays that can be used to transmit signal to the destination. However, using all relays to transmit signal consume power and bandwidth. In this paper, we propose a new protocol in which the best relays are chosen based on threshold of distance from the source to the relay and the relay to the destination when the relays use decode- and forward (DF) protocol. Simulation results prove the efficiency of the protocol when we compare using only the best relays with using all relays to transmit signal to the destination.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.423-425
• /
• 2007

In this paper, Medium Access Control(MAC) protocol designed for Wireless Body area Sensor Network(Bio-MAC) is proposed, Because in WBSN, the number of node is limited and each node has different characteristics. Also, reliability in transmitting vital data sensed at each node and periodic transmission should be considered so that general MAC protocol cannot satisfy such requirements of biomedical sensors in WBSN. Bio-MAC aims at optimal MAC protocol in WBSN. For this, Bio-MAC used Pattern -SuperFrame, which modified IEE E 802.15.4-based SuperFrame structurely. Bio-MAC based on TDMA uses Medium Access-priority and Pattern eXchange -Beacon method for dynamic slot allocation by considering critical sensing data or power consumption level of sensor no de etc. Also, because of the least delay time. Bio-MAC is suitable in the periodic transmission of vital signal data. The simulation results demonstrate that a efficient performance in WBSN can be achieved through the proposed Bio-MAC.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.133-136
• /
• 2003

In this paper, we propose a multicast routing protocol for the seamless delivery of multicast data to mobile hosts through the optimal route in IP based mobile networks. The proposed multicast routing protocol is a hybrid method employing the merits of the bi-directional tunneling and the remote subscription by considering the mobility of mobile hosts. The proposed protocol satisfies the bound of end-to-end delay and supports the seamless handoff. The simulation results show that the proposed protocol has better performance in the number of multicast tree reconstruction and tunneling length and packet loss time than the previous protocols.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.291-302
• /
• 2018

The deployment of an incremental hybrid decode-amplify and forward relaying scheme is a promising and superior solution for cellular networks to meet ever-growing network traffic demands. However, the selection of a suitable relaying protocol based on the signal-to-noise ratio threshold is important in realizing an improved quality of service. In this paper, an incremental hybrid relaying protocol is proposed using polar codes. The proposed protocol achieves a better performance than existing turbo codes in terms of capacity. Simulation results show that the polar codes through an incremental hybrid decode-amplify-and-forward relay can provide a 38% gain when ${\gamma}_{th(1)}$ and ${\gamma}_{th(2)}$ are optimal. Further, the channel capacity is improved to 17.5 b/s/Hz and 23 b/s/Hz for $2{\times}2$ MIMO and $4{\times}4$ MIMO systems, respectively. Monte Carlo simulations are carried out to achieve the optimal solution.