• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.839-848
• /
• 2015

This study examined the optimal salting drying method and processing conditions (salt concentration, curing time, dry temperature, and drying time) for preparing salted semi-dried common gray mullet (SSD-CGM) Mugil cephalus based on the moisture content, salinity, and overall acceptance using response surface methodology (RSM). The moisture content, salinity, and overall acceptance of SSD-CGM prepared with different salting methods revealed that dry salting was the optimal salting method for preparing high-quality SSD-CGM. The optimal drying method for preparing high-quality SSD-CGM based on the drying velocity and sensory color was hot air-blast drying. The results of the RSM program indicated that the optimal independent variables ($X_1$, salt concentration; $X_2$, curing time; $X_3$, dry temperature; $X_4$, drying time) based on the dependent variables ($Y_1$, moisture content; $Y_2$, salinity; $Y_3$, overall acceptance) for high-quality SSD-CGM were 5.6% for $X_1$, 2.7 h for $X_2$, $47.0^{\circ}C$ for $X_3$, and 8.5 h for $X_4$ for uncoded values. The predicted values of $Y_1$, $Y_2$, and $Y_3$ for SSD-CGM prepared under optimal conditions were 54.4%, 4.2%, and 6.3, respectively, while the experimental values were $55.2{\pm}1.0%$, $4.1{\pm}0.3%$ and $6.7{\pm}0.8$. The actual and predicted values did not differ.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.689-695
• /
• 2013

Flounder Verasper moseri Jordan et Gilberu sikhae is a traditional salt-fermented food in Korea. We investigated the optimal processing conditions for desirable quality-controlled flounder sikhae by analyzing the physiochemical properties, microbiological species, and organoleptic properties. The optimal fermentation temperature, salt concentration, and fermentation period for preparing flounder sikhae of acceptable quality were $10^{\circ}C$, 4%, and 14 days, respectively. The amino-N and volatile basic nitrogen (VBN) contents of rhe acceptable quality flounder sikhae were 243.65 mg/100 g and 44.25 mg/100 g, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.1
• /
• pp.36-43
• /
• 2015

We examined sensory characteristics to determine the optimal conditions for flounder Verasper moseri Jordan et Gilbert sikhe preparation, using response surface methodology. Our aim was to develop the optimum mixing rates and materials for producing highly palatable flounder sikhe. The optimal fermentation temperature, salt concentration, and fermentation period for preparing flounder sikhe of acceptable quality were $11.63^{\circ}C$, 4.66% and 9.12 days, respectively. The optimal percentages of red pepper powder, garlic, monosodium glutamate, ginger, radish and foxtail millet were 16.08%, 7.21%, 2.96%, 3.70%, 10.12% and 13.72% respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.627-634
• /
• 2012

Squid Sikhae is traditional salt-fermented food in Korea. We evaluated the standardization of optimal processing conditions for desirable quality-controlled squid Sikhae using analyses of physiochemical properties, microbiological species, and organoleptic tests. Among several squid Sikhae preparation processes, the optimal fermentation temperature sun-dried sea salt concentration, and fermentation period for squid Sikhae of acceptable quality were $10^{\circ}C$, 4%, and 6 days, respectively. Amino-N and volatile basic nitrogen (VBN) contents of the acceptable quality squid Sikhae were 162.51 mg/100 g and 15.25 mg/100 g, respectively.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.697-702
• /
• 1995

Changes of physicochemical properties during the preparation of persimmon pickles and its optimal preparing conditions including salt concentration, soaking temperature, soaking time, amount of fermented soy paste, and ripeness of fresh pesimmon were investigated. The salinity and pH of soaking solution were rapidly dropped during 40 days of soaking, while their changes were negligible after 40 days of soaking. When the fermented soy paste was added to the soaking solution with $10{\sim}40%$ the pH dropped more slowly. Salt content in persimmon pickles was gradually increased during soaking and soluble tannin content was rapidly decreased during the first 10 days of soaking. L value of persimmon pickles was gradually decreased, but a/b value was slightly increased. The hardness of persimmon pickles was slightly increased up to the 20th day of soaking and then decreased. Most acceptable persimmon pickles were prepared when the less ripened fresh persimmons were soaked in 10% salt solution at $15^{\circ}C$ for 40 days, and the suitable amount of soy paste added to the soaking solution for preparing persimmon pickles was 20%.

• Journal of the Korean Home Economics Association
• /
• v.19 no.3
• /
• pp.63-68
• /
• 1981

This study was to determine optimal conditions for preparing Gangjung and Sanja. Texturometer and panel test were employed to evaluated products which were prepared under varying soaking time of glutinous rice. The results are found as follows; Examination of acceptibilities of products by the panel test showed that 48 hours of soaking was the most optimal. In acceptability ratings. the second went to 2 hours, the third 24 hours, the forth 120 hours, the fifth, 72 hours, and the sixth, 96 hours. However, there was no significant difference in acceptability among various products(P>0.05). The cohesiveness and the brittleness of the highest-grade products soaking in 48 hours showed 0.09$cm^{2}$, 1.25cm, respectively by texturometer. In therms of acceptability, the cohesiveness of high-grade products read between 0.06~0.7$cm^{2}$. The brittleness of products examined was in the range of between 0.36 and 1.41cm. No significant difference was found among products prepared under varying soaking time n cohesiveness and brittleness.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.11-14
• /
• 2004

An rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of E${\times}$B field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.1
• /
• pp.75-80
• /
• 1997

An ethanolic fermentation process was developed for preparing Doenjang with high ethanol. Higher and efficient viable cell production of salt-tolerant ethanolic yeast is a prerequisite for the successful commercial-scale process of ethanol production during Doenjang fermentation. Culture conditions of salt-tolerant yeast, S. cerevisiae KFCC 10823, was studied in terms of the effect of several environmental and nutritional factors. Viable cell numbers were the highest in a medium containing the following components per liter of water: soysauce, 300ml; dextrose, 50 g; beef extract, 5 g; yeast extract, 5 g; $KH_2PO_4$, 5 g; NaCl, 50 g. The optimal culture conditions of S. cerevisiae KFCC 10823 were pH 5.5, $25^{\circ}C$, 200 rpm and 0.5 vvm. Yeast viability during batch fermentation was gradually decreased to a level less than $90{\%}$ after 35 hours. The maximum cell number was $2.2{\times}10_7$ cells/ml at the optimal condition. Doenjang prepared with ethanolic yeast was ripened after 45 days at $30^{\circ}C$. This Doenjang contains 470 mg% of amino nitrogen and 2.5% ethanol. The shelf-life at $30^{\circ}C$ was theoretically estimated as 444 days.

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2761-2766
• /
• 2021

A method for preparing "reagent" for radioactive methyliodide vapors production using an isotopic exchange reaction has been developed. Based on the obtained data of the isotopic exchange efficiency and hydraulic resistance, white fused alumina (700-840 ㎛) was selected as the carrying agent material for "reagent" production. The radioiodine isotopic exchange dependences on such parameters as temperature, gas flow velocity, and the methyliodide concentration in it were determined. Optimal conditions have been selected to achieve 85% of the isotopic exchange rate in 1 h of the experiment. The obtained data allowed to develop an approach to the test of iodine filters for nuclear power plants and to determine their efficiency.