• KIEAE Journal
• /
• 제17권3호
• /
• pp.99-106
• /
• 2017

Purpose: Most modern office buildings adopt the curtain wall system in order to provide occupants with the sense of openness and high-technology, which requires large window area. As a result, the amount of solar radiation increases, negatively affecting cooling load during the summer and increasing energy costs. However, the performance of window itself is not sufficiently controllable parameter to control thermal comfort and solar radiation. Therefore, a shading device such as venetian blind is required to control them and thus a variety of studies have been performed thus far. So, the purpose of this study is to improve the performance of blind through the development of blind control algorithm. Method: Among various input variables for the control of venetian blinds, the vertical solar radiation has been selected in this study as the primary input variable and the optimal control algorithm for venetian blinds were developed for each window orientation. Result: The developed optimal control algorithm has a positive effect on building energy savings.

• 한국항행학회논문지
• /
• 제17권3호
• /
• pp.354-360
• /
• 2013

모션 및 무인 차량의 깊이 제어를 위해 스테레오 비전 분석을 하였다. 스테레오 비전에서 3차원 좌표의 깊이 정보는 스테레오 이미지 사이의 포인트를 식별한 후 삼각 측량을 통해 얻을 수 있다. 그러나 항상 몇몇 이유 때문에 삼각 측량의 오류가 발생한다. 비전 삼각 측량의 이러한 오류는 카메라의 위치와 방향에 주의하여 배열함으로써 완화 될 수 있다. 본 논문에서는 무인 차량을 위해 카메라의 최적의 위치와 방향을 결정하는 방법을 제시하였다.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.245-250
• /
• 2014

The purpose of this study is to introduce a empirical study of using Taguchi Method for the Entrepreneurial Orientation and Financial Performance. In this study, three factors of Entrepreneurial Orientation, innovation, pro-activity and risk taking, are used of the control factors and an element, period of establishment, is chosen as a noise factor. In order to carry out this research, we obtained 200 survey sheets and performed the reliability and validity analysis of the questionnaires and then the experiment was conducted by Taguchi's experimental design. To improve Financial Performance under the noise factor of period of establishment, optimal condition are as follows; the two factors of Entrepreneurial Orientation, innovation, pro-activity should be maintained to a high level. Also, other factor, risk taking should be performed as the level that the company has maintained. Through this paper, we find out that Taguchi method is applicable for analysis of questionnaire.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.649-654
• /
• 2002

In recent days the more use of CFRP composite is in the airplane, automobile, and sport goods , etc., the more necessity of research on it in this engineering. In this research, the CFRP composite specimen are fabricated by 48 CFRP plies with 8 orientation angles, and the specimens are drilled with 3 tools. The results are analyzed with consideration of cutting force, type of tools and fabrication condition. The specimens with each drilling conditions are also investigated with SEM. The optimal drilling conditions such as drill types and cutting fence with respect to the fabricating condition are studied.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.960-963
• /
• 2002

In recent days the more use of CFRP composite is in the airplane, automobile, and sport goods, etc., the more necessity of research on it in this engineering. In this research, the CFRP composite specimen are fabricated by 48 CFRP plies with 8 orientation angles, and the specimens are drilled with 3 tools. The results are analyzed with consideration of cutting force, type of tools and fabrication condition. The specimens with each drilling conditions are also investigated with SEM. The optimal drilling conditions such as drill types and cutting force with respect to the fabricating condition are studied.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.137-140
• /
• 1997

In general, stereolithography parts is not suitable for master pattern. Because of its bad surface roughness. Therefore, To reduce roughness it requires post-process that is depending on user skill and takes long time to do. This study aims to develop an expert system which can select an optimal build orientation, reduce roughness and shorten post-processing time. Genetic Algorithm was introduced for optimization. A simplified computation model was developed for real-time response. For accurate roughness estimation, mterpolation of experimental data was implemented.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.191-197
• /
• 2007

Inclined surface milling in the mould and die industries is one of the most commonly needed cutting process. For the variety and complexity of cutting characteristics in various cutting condition, it is difficult to select a optimal tool path orientation. Especially, when the cutting process becomes unstable, it induces self-exited vibrations, a frequent cause of poor tool life, rough surface finish, damage to the workpiece and the machine tool itself, and excessive down time. The comparative results through FFT analysis in this study provide a guideline for the selection tool path orientation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.504-509
• /
• 1994

Recently SMT is used widely to place the SMD on bare board which is very small and highly integrated. And that is one of the issue directly in the electric products assembly process and especiallly in the field of optimizing electric product's performance, automatically tuning method which is highly demanded in the electronics industry. To tune product's performance, variable resistances's resistivity should be changed until it has good performance characteristics. In this paper to automatically regulate the 8mm camcoder's performance, it is proposed variable resistence's center position and orientation detection algorithm by image processing, which has very precise and accurate result. And we found optimal conditions which can have effects on image acquisition process. And real time processing is done by DSP to detect vr's center and orientation. This results make it possible to utilize proposed image processing algorithm and system directly in electronics industry.

• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.158-165
• /
• 2011

Statistics by structural equation modeling techniques were used to assess a model of chemistry learning strategy based on performance goal orientation. In the optimal Model III of this research, Performance-approach goal was positively related to the use of learning strategy(p<.05) and achievement need(p<.05). Performance-avoidance goal was negatively related to learning strategy(p<.05) and was positively related to self-handicapping tendency(p<.15). Performance-approach goal affected learning strategy indirectly through achievement need(p<.05). Use of achievement need was positively related to learning strategy(p<.05) and self-handicapping tendency(p<.35). Self-handicapping tendency affected learning strategy negatively(p<.05). Implications of these findings for learning strategy in chemistry education are discussed.

• 신재생에너지
• /
• 제19권3호
• /
• pp.13-21
• /
• 2023

Smart windows are capable of varying their visible light transmittance (VLT) in response to changing environmental conditions. The VLT variability of architectural windows is highly valuable because it enables indoor lighting and energy environments to align with external changes. However, challenges such as high installation costs and assurance of glass visibility have prompted the exploration of alternative solutions, including models incorporating partially applied smart windows., Prior research focused on useful daylight illuminance (UDI) analysis for south-facing office buildings, pointing out suitable areas for smart-window implementation to enhance lighting control. In this study, we broadened this scope by determining optimal smart-window application zones under changing building orientation. Furthermore, we studied the correlation between building orientation and smart-window deployment areas.