• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.790-797
• /
• 2023

Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated surimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b^* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a^* (redness) and b^* decreased in a content-dependent manner, and L^* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were absent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.2
• /
• pp.256-266
• /
• 2014

The purpose of this study was to determine the optimal mixing conditions of soybean oil and bread crumbs mixture for pork patty. The experiment was designed according to the central composite design of response surface methodology. There were ten experimental points, including two replicates for soybean oil and bread crumbs. The physicochemical and mechanical analyses of each sample, including pH, cooking loss, thickness increase, moisture content, lightness, hardness, adhesiveness, springiness, chewiness, and gumminess showed significant differences (p<0.05). The results of sensory evaluation showed significant differences in tenderness, juiciness, and overall quality (p<0.05). The optimum formulation calculated by numerical and graphical method was 13.61 g of soybean oil and 6.35 g of bread crumbs. The results obtained in this study will be useful to the meat industry, which tends to decrease the saturated fatty acid content with a concomitant enrichment in the unsaturated fatty acids content.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.61-70
• /
• 2005

A total of 4 trials were conducted to evaluate the nutritional value of food waste-byproduct feeds mixture(FWM) rotary drum-pasteurized and cured, to trace the nutritional flow according to the processing stages and finally to determine the optimal mixing formulation of feed ingredients for the growing pigs. Pasteurizing and curing FWM using a rotary drum drier resulted in little change in chemical composition and 8 to $15 \%$ of dry matter losses. Chemical change was affected by different feed ingredients used in each trial. Curding of FWM was caused probably by high moisture content, starch content and(or) physical characteristics of feed ingredients. The optimal mixing ratio of feed ingredients was food waste 45 : deepstacked broiler litter 10 : bakery by-product 22.5 barley bran 22.5. In conclusion, FWM rotary drum-pasteurized and cured had a satisfactory feed-nutritional value far growing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.10
• /
• pp.1449-1453
• /
• 2015

The objective of the present study was to determine the effects of feeding pelletized broccoli byproducts (PBB) on milk yield and milk composition in dairy cows. In Trial 1, an in vitro gas test determined the optimal replacement level of PBB in a concentrate mixture in a mixed substrate with Chinese wild ryegrass hay (50:50, w/w) at levels of 0, 10%, 20%, 30%, or 40% (dry matter basis). When the concentrate was replaced by PBB at a level of 20%, no adverse effects were found on the gas volume or its rate constant during ruminal fermentation. In trial 2, 24 lactating cows (days in milk = $170.4{\pm}35$; milk yield = $30{\pm}3kg/d$; body weight = $580{\pm}13kg$) were divided into 12 blocks based on day in milk and milk yield and randomly allocated to two dietary treatments: a basic diet with or without PBB replacing 20% of the concentrate mixture. The feeding trial lasted for 56 days; the first week allowed for adaptation to the diet. The milk composition was analyzed once a week. No significant difference in milk yield was observed between the two groups (23.5 vs 24.2 kg). A significant increase was found in milk fat content in the PBB group (p<0.05). Inclusion of PBB did not affect milk protein, lactose, total solids or solids-not-fat (p>0.05). These results indicated that PBB could be included in dairy cattle diets at a suitable level to replace concentrate mixture without any adverse effects on dairy performance.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1476-1480
• /
• 2009

Antioxidant activities of mulberry leaf extracted with different concentrations of EtOH were investigated. Total phenolic content and electron donating abilities of extract from 70% EtOH were the highest. Extracts obtained from EtOH-water mixture were shown to be significantly higher superoxide dismutase (SOD)-like activities than other treatment (p<0.05). Angiotensin-converting enzyme (ACE) inhibition was the greatest at 50% EtOH concentration (p<0.05). The extracts from 30-70% EtOH exhibited higher ferric reducing ability of plasma (FRAP) value than rest of the concentration (p<0.05). In case of nitrite scavenging activity, much higher scavenging activities were observed when the extraction was performed with EtOH or EtOH-water mixture (p<0.05). The results indicate that concentration of EtOH as extraction solvents can affect the antioxidant activity of mulberry leaf, which may provide useful information on the optimal solvent conditions for the extraction.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.391-401
• /
• 2017

In this study, the effects of water-to-binder (W/B) ratio and replacement ratio of blast furnace slag (BFS) on the compressive strength of concrete were first investigated to determine an optimized mixture. Then, using the optimized high-strength concrete (HSC) mixture, hooked steel fibers with various aspect ratios and volume fractions were used as additives and the resulting mechanical properties under compression and flexure were evaluated. Test results indicated that replacement ratios of BFS from 50 to 60% were optimal in maximizing the compressive strength of steam-cured HSCs with various W/B ratios. The use of hooked steel fibers with the aspect ratio of 80 led to better mechanical performance under both compression and flexure than those with the aspect ratio of 65. By increasing the fiber aspect ratio from 65 to 80, the hooked steel fiber volume content could be reduced by 0.25% without any significant deterioration of energy absorption capacity. Lastly, complete material models of steel-fiber-reinforced HSCs were proposed for structural design from Lee's model and the RILEM TC 162-TDF recommendations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.736-740
• /
• 2004

Preparation of ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc that was obtained after preparation of white tail ginseng extract. As a result of extraction of white tail ginseng under various concentrations of ethanol (0∼90%), both amount of acidic polysaccharide and extraction yield decreased by increasing the ethanol concentration. However, acidic polysaccharide extracted by water from white tail ginseng marc was increased in accordance with the increase of ethanol concentration. The optimal condition for the extraction of acidic polysaccharide from the marc was treatment of $\alpha$-amylase in 390∼650 unit/g residue/15 mL of distilled water for 5 min at 4$0^{\circ}C$. The amount of acidic polysaccharide in water extract of the marc was increased from 8.3% to 10.5% by the treatment of $\alpha$-amylase. A new ginseng extract mixture was manufactured by mixing 50% ethanol extract of white tail ginseng and water extract of alcoholic residue in the ratio of 8:2 (w/w). Crude saponin content and acidic polysaccharide content were 10.5% and 17%, respectively. The mixture had a same crude saponin content and twice acidic polysaccharide content comparing to 50% ethanol extract of white tail ginseng. It suggests that preparation of new ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc has high potencies in the utilization of waste material.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.46-58
• /
• 2017

This study was conducted to investigate the optimal conditions for spore germination, prothallus propagation, sporophyte formation and seedling growth in Microlepia strigosa (Thunb.) C. Presl. Spore germination and prothallus development were promoted by low concentrations of Knop medium nutrient solution. The optimal medium for prothallus propagation and antheridium formation was 2X MS medium with 3% sucrose. The activated charcoal content of the medium did not affect prothallus proliferation. Among the various combinations of culture soil (bedding soil, peat moss, perlite and decomposed granite), a mixture of bedding soil, peat moss and decomposed granite at a ratio of 1 : 1 : 1 (v : v : v) had a positive effect on sporophyte formation. The most efficient conditions for promoting the growth of whole plants (sporophyte seedlings) were 50 - cell plug trays filled with a mixture of bedding soil and decomposed granite at a 2 : 1 (v : v) ratio.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.413-416
• /
• 2008

A synthesis route to ordered mesoporous carbons with controllable nitrogen content has been developed for high-performance EDLC electrodes. Nitrogen-doped ordered mesoporous carbons (denoted as NMC) were prepared by carbonizing a mixture of two different carbon sources within the mesoporous silica designated by KIT-6. Furfuryl alcohol was used as a primary carbon precursor, and melamine as a nitrogen dopant. This synthesis procedure gave cubic Ia3d mesoporous carbons containing nitrogen as much as 13%. The carbon exhibited a narrow pore size distribution centered at 3-4 nm with large pore volume (0.6-1 cm3 g-1) and high specific BET surface area (700-1000 m2 g-1). Electrochemical behaviors of the NMC samples with various N-contents were investigated by a two-electrode measurement system at aqueous solutions. At low current density, the NMC exhibited markedly increasing capacitance due to the increase in the nitrogen content. This result could be attributed to the enhanced surface affinity between carbon electrode and electrolyte ions due to the hydrophilic nitrogen functional groups. At high current density conditions, the NMC samples exhibited decreasing specific capacitance against the increase in the nitrogen content. The loss of the capacitance with the N-content may be explained by high electric resistance which causes a significant IR drop at high current densities. The present results indicate that the optimal nitrogen content is required for achieving high power and high energy density simultaneously.

• Korean journal of food and cookery science
• /
• v.27 no.2
• /
• pp.111-123
• /
• 2011

The purpose of this study was to investigate the quality characteristics of Sulgidduk prepared by adding the optimal amount of apple powder. Five different mixture ratios of apple powder to rice flour were prepared (0, 4, 8, 12, and 16%). After being stored for 3 days, the mixtures of apple powder and rice flour were measured to determine moisture content, color values, sensory qualities, and the mechanical texture characteristics of Sulgidduk. Moisture content of Sulgidduk with added apple powder ranged from 36% to 39% and but decreased with significantly with added apple powder. The L-color value decreased, whereas both the a-and b-values increased as apple powder was added. Thus, apple peel likely affected the Sulgidduk color value. The pH of Sulgidduk decreased with the addition of apple powder, whereas sugar level increased as apple powder was added. In the mechanical evaluation of apple Sulgidduk, hardness was significantly higher during the 3 days of storage with increasing amounts of added apple powder. Cohesiveness increased significantly during the storage period with the addition of apple powder,-; however, it began to decreased after 3 days. Springiness increased significantly with the addition of apple powder. Both adhesiveness and chewiness of Sulgidduk increased with added apple powder. Sensory quality characteristics such as color, taste, flavor, and moistness were improved with increasing amounts of added apple powder. However, the sensory quality of Sulgidduk decreased when the ratio of apple powder to rice flour was greater than 25%. Consequently, a mixture of 15~20% apple powder to rice flour was the best formula for improving Sulgidduk in terms of sensory quality.