• Journal of Mushroom
• /
• v.3 no.2
• /
• pp.75-78
• /
• 2005

The results of studies for determining the nutrients sources of mycelial growth for optimal condition of Pleurotus cornucopiae are as follows; 1) Optimal carbon source of mycelial growth of Pleurotus cornucopiae is maltose(357mg/25ml/15d); 2) Optimal nitrogen source of mycelial growth of Pleurotus cornucopiae is peptone(347mg/25ml/15d); 3) Optimal organic acid source of mycelial growth of Pleurotus cornucopiae is glutamic acid(389mg/25ml/15d); 4) Optimal vitamin source of mycelial growth of Pleurotus cornucopiae is biotin(399mg/15d); and 5) Optimal C/N ratio for mycelial growth for determining the condition of Pleurotus cornucopiae is 40(398mg/15d).

• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.76-80
• /
• 2007

This study was carried out to obtain basic data on mycelial growth characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and investigated its optimal culture condition. Among four kinds of mushroom culture media, PDA medium was selected as the suitable culture medium. The optimal conditions for the mycelial growth of G. frondosa in PDA medium were $25^{\circ}C$ and $4{\sim}5$ of pH, respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively, and the highest mycelial growth was observed when the C/N ratio was $10{\sim}20$.

• Journal of Mushroom
• /
• v.3 no.1
• /
• pp.40-44
• /
• 2005

The results of examining selection of optimal mycelial growth condition excellent strain for determining the condition of Pleurotus cornucopiae are as follows. 1) Mycelial growth and density of P. cornucopiae were the highest in the medium of MCM(87.8mm/10d) followed by the order of PDA, YM, MEA and Czapek. 2) Optimal temperature for the mycelial growth and density of P. cornucopiae was shown to be $25^{\circ}C$, but the hyphae were dead at $5^{\circ}C$. The mycelial growth and density of KNAC2003 strain was the highest at $25^{\circ}C$(87.8mm/10d) followed by the order of 25, 30, 20, 35, 10 and $5^{\circ}C$. 3) Optimal pH for the mycelial growth and density was revealed to be 6.0(88.3mm/10d), but the mycelial growth and density were shown to be retarded in above or below pH 6.0.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.122-131
• /
• 1999

Indoor environments are usually less than optimal for the growth of ferns, especially in regards to the water condition. These studies were performed to investigate responses involved in causing growth of ferns and presume management plan against the water deficit under indoor conditions. The effect of air humidity and soil moisture on the ferns was examined in Adiantume raddianum and Selaginella kraussiana. Results of experiments are as follows; 1. Under a low humidity condition, having a 25-50% RH. ornamental value of ferns decreased much more than under a 90% RH. Under a low soil moisture, such as sand treatment, ornamental value of ferns also decreased. 2. Leaf chlorophyll content, water content and stomata situations increased as air humidity and soil moisture went up. 3. Even if air humidity and soil water were not enough for ferns growth, the extending of irrigation cycle was helpful. 4. Under extremely low air humidity conditions, some water management, namely, using water holding soil or extending of irrigation cycle was desirable. Other methods of increasing air humidity, including water instruments such as ornamental pools, waterfalls, or fountains, grouping plants together were also helpful. But spraying water on leaves increased injury to ferns growth because of excess evaporation from the leaves. Though these studies, we learn that ferns are susceptible to water condition such as air humidity, soil water and water management. If other environmental factos are maintained with optimal conditions, water condition plays an important role in ferns growth in indoor environments.

• Mycobiology
• /
• v.36 no.3
• /
• pp.152-156
• /
• 2008

The fungus Phellinus is a mushroom that is widely used medicinally. The optimal conditions for mycelial growth of 13 strains of the fungus were investigated. Mycelial growth was optimal at 25$^{\circ}C$ and was uniformly minimal at 15$^{\circ}C$ and 35$^{\circ}C$. Growth was optimal at pH 6$\sim$7. The mycelial phenotype was best promoted by growth using Potato Dextrose agar, Hamada, Glucose peptone, and Yeast-Malt media, whereas Czapek Dox, Hennerberg, and Lilly media were the most unfavorable for the mycelial growth of Phellinus spp. Glucose, sucrose, fructose, and dextrin were the most suitable carbon sources for mycelial growth, while lactose, maltose, and galactose were unsuitable. Among tested nitrogen sources, ammonium phosphate, potassium nitrate, and arginine best promoted mycelial growth, while alanine, urea, and histidine least promoted mycelial growth.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.145-148
• /
• 2013

Studies were made to optimize the media composition and cultural condition for mycelial growth of ear mushroom(Auricularia auricula). Sawdust spawn of media composition for optimal growth were found to be quercus sawdust combination of 20% rice bran and poplar sawdust combination of 10% wheat bran were the best of the optimal combination. The optimal condition of the most suitable inoculation amount showed that quercus spawn and poplar spawn were 15g, 25g, respectively.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.220-228
• /
• 1995

For polyhydroxyalkanoic acid (PHA) production, several microorganisms were isolated from sewage sludge. One of them, GB-77 strain, was chosen from its PHB/HV copolymer production on only fructose without cosubstrate. The isolated strain GB-77 was identified as the genus Alcaligenes. Optimal temperature and pH for cell growth were 36C and 6.8. Optimal medium composition was 10 g/l of fructose and 5 g/l of polypeptone, 1 $\times$ 10$^{-2}$M Na$^{2}$HP0$^{4}$, 1.3 $\times$ 10$^{-2}$M KH$^{2}$PO$^{4}$. To investigate the optimal condition for polyhydroxyalkanoic acid production two-stage culture technique was used; first stage for cell growth and second stage for PHA production on unbalanced growth conditions. Optimal conditions for high PHA production were C/N ratio 50, temperature 36$\circ$C and pH 6.8. To overcome fructose inhibition on cell growth, intermittent feeding fed-batch culture technique was used. Total cell concentration was 17.4 g/l with 9.1 g/l of PHA. The purified PHA was identified PHB/HV copolymer by NMR analysis.

• Fisheries and Aquatic Sciences
• /
• v.23 no.4
• /
• pp.11.1-11.11
• /
• 2020

We tried to find the optimal growth conditions of sea cucumber and to analyze the economic effectiveness of the sea cucumber seedling release project in Korea. We first examined the optimal growth conditions of sea cucumber in the relating literatures. Then, we analyzed the economic effectiveness of the sea cucumber seedling release project of the Woncheon fishing village union of Gyeongnam Province in 2016-2018 by using the cost benefit analysis method. The net income of the release project of the Woncheon fishing village union was 69,850 Korean won. The benefit to cost ratio of the sea cucumber seedling release project of the Woncheon fishing village union was estimated to be 1.7, indicating that the project was economically feasible. In order to improve the economic feasibility of the sea cucumber release project, as we see in the case of the Woncheon fishing village union, it is necessary to manage the purchase of the sea cucumber seedling, to improve the recapture rate of sea cucumber, and to manage marketing of sea cucumber.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.209-216
• /
• 2014

The efficiency of gamma irradiation (0, 1, 5, 10, 15, 20, and 30 kGy) as a sterilization method of corn samples (30 g) artificially contaminated with Fusarium moniliforme stored at normal condition ($25^{\circ}C$ with approximate relative humidity (RH) of 55%) and optimal condition ($25^{\circ}C$ with a controlled RH of 97%) was studied. The results showed that the fungal growth and the amount of fumonisin were decreased as the dose of gamma irradiation increased. Gamma irradiation at 1-5 kGy treatment significantly inhibited the growth of F. moniliforme by 1-2 log reduction on corn samples (P < 0.05). Sublethal effect of gamma irradiation was observed at 10-20 kGy doses after storage, and a complete inactivation required 30 kGy. Fungal growth and fumonisin production increased with higher humidity and longer storage time in all corn samples. This study also demonstrated that there was no strict correlation between fungal growth and fumonisin production. Storage at normal condition significantly resulted in lower growth and fumonisin production of F. moniliforme as compared with those stored at optimal condition (P < 0.05). Gamma irradiation with the dose of ${\geq}5$ kGy followed by storage at normal condition successfully prolonged the shelf life of irradiated corns, intended for human and animal consumptions, up to 7 weeks.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.4
• /
• pp.217-224
• /
• 2014

Cochlodinium polykrikoides is a typical harmful algal species which generates the red-tide in the coastal zone, southern Korea. Accurate algal growth model can be established and then the prediction of the red-tide occurrence using this model is possible if the information on the optimal growth model parameters are available because it is directly related between the red-tide occurrence and the rapid algal bloom. However, the limitation factors on the algal growth, such as light intensity, water temperature, salinity, and nutrient concentrations, are so diverse and also the limitation function types are diverse. Thus, the study on the algal growth model development using the available laboratory data set on the growth rate change due to the limitation factors are relatively very poor in the perspective of the model. In this study, the growth model on the C. polykrikoides are developed and suggested as the optimal model which can be used as the element model in the red-tide or ecological models. The optimal parameter estimation and an error analysis are carried out using the available previous research results and data sets. This model can be used for the difference analysis between the lab. condition and in-situ state because it is an optimal model for the lab. condition. The parameter values and ranges also can be used for the model calibration and validation using the in-situ monitoring environmental and algal bloom data sets.