• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.9-11
• /
• 2010

Multiple-input multiple-output (MIMO) systems assisted by multi-relays with single antenna are considered. Signal transmission consists of two hops. In the first hop, the source node broadcasts the vector symbols to all relays, then all relays forward the received signals multiplied by each power gain to the destination simultaneously. Unlike the case of full cooperation between relays such as single relay with multiple antennas, in our case there is no closed form solution for optimal relay power gain with respect to minimum mean square error (MMSE). Thus we propose an alternative approach in which we use an approximation of the cost function based on rank-one matrix decomposition. As a cost function, we choose the trace of MSE matrix. We give several simulation results to validate that our proposed method obtains a negligible performance loss compared to optimal solution obtained by exhaustive search.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.367-374
• /
• 2004

Roads which were not considered conditions such as capacity of the traffic have made seriously traffic problems and complex road lines. Construction of new roads have to make efficiently for solving the above problems and gain benefits. Simulation using 3D-GIS help find a matter of the design and do understanding users who work In the practical businesses. This study is showed selection of the optimal road line based on 3D-GIS through the traffic modeling.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.83-90
• /
• 2001

본 논문은 전력계통에 저주파수 동요현상을 제거하기 위한 목적으로 쓰이고 있는 전력계통 안정화 장치의 적정 파라메타 선정에 관한 알고리즘을 다루었다. 실측에 의한 발전기 시스템의 모델로부터 시스템 제 정수를 구하고, 극좌표 이동법으로 적절한 전력계통 안정화 장치의 파라메타를 Matlab으로 작성하여 구했다. 이 기법으로 선정된 전력계통 안정화 장치의 파라메타로 1기 무한대 계통에 적용한 시뮬레이션 결과는 만족한 만큼의 댐핑 효과를 보았다.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.28-37
• /
• 2008

In this paper, we investigate the problem of minimizing the average transmission power of users while guaranteeing the average delay constraints in time-varying uplink channels. We design a scheduler that selects a user for transmission and determines the transmission rate of the selected user based on the channel and backlog information of users. Since it requires prohibitively high computation complexity to determine an optimal scheduler for multi-user systems, we propose a low-complexity scheduling scheme that can achieve near-optimal performance. In this scheme, we reduce the complexity by decomposing the multiuser problem into multiple individual user problems. We arrange the probability of selecting each user such that it can be determined only by the information of the corresponding user and then optimize the transmission rate of each user independently. We solve the user problem by using a dynamic programming approach and analyze the upper and lower bounds of average transmission power and average delay, respectively. In addition, we investigate the effects of the user selection algorithm on the performance for different channel models. We show that a channel-adaptive user selection algorithm can improve the energy efficiency under uncorrelated channels but the gain is obtainable only for loose delay requirements in the case of correlated channels. Based on this, we propose a user selection algorithm that adapts itself to both the channel condition and the backlog level, which turns out to be energy-efficient over wide range of delay requirement regardless of the channel model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.19-20
• /
• 2006

In this paper, to reduce uplink feedback information for the beam weight and simultaneously maintaining the performance, we propose a MIMO-OFDM (Multi Input Multi Output-Orthogonal Frequency Division Multiplexing) system based on beamforming with antenna selection. In the proposed system, to perform the beamforming with more useful transmit antennas, the optimal combination of transmit antennas with maximum MRT (Maximum Ratio Transmission) beamforming gain is selected. Simulation results reveal that the proposed MIMO-OFDM system adopting the beamforming with antenna selection can reduce the feedback information for the beam weights as compared to the system using all the transmit antennas without serious degradation of system performance.

• 한국음향학회지
• /
• 제31권1호
• /
• pp.39-50
• /
• 2012

A voice transformation (VT) method that can make the utterance of a source speaker mimic that of a target speaker is described. Speaker individuality transformation is achieved by altering three feature parameters, which include the LPC cepstrum, pitch period and gain. The main objective of this study involves construction of an optimal sequence of features selected from a target speaker's database, to maximize both the correlation probabilities between the transformed and the source features and the likelihood of the transformed features with respect to the target model. A set of two-pass conversion rules is proposed, where the feature parameters are first selected from a database then the optimal sequence of the feature parameters is then constructed in the second pass. The conversion rules were developed using a statistical approach that employed a maximum likelihood criterion. In constructing an optimal sequence of the features, a hidden Markov model (HMM) was employed to find the most likely combination of the features with respect to the target speaker's model. The effectiveness of the proposed transformation method was evaluated using objective tests and informal listening tests. We confirmed that the proposed method leads to perceptually more preferred results, compared with the conventional methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3524-3542
• /
• 2017

In a single-source and multi-relay amplify-forward (AF) cooperative network, the outage probability and the power allocation are two key factors to influence the performance of an entire system. In this paper, an optimized AF relay selection by an exclusive method and near optimal power allocation (NOPA) is proposed for both good outage probability and power efficiency. Given the same power at the source and the relay nodes, a threshold for selecting the relay nodes is deduced and employed to minimize the average outage probability. It mainly excludes the relay nodes with much higher thresholds over the aforementioned threshold and thus the remainders of the relay nodes participate in cooperative forwarding efficiently. So the proposed scheme can improve the utility of the resources in the cooperative multi-relay system, as well as reduce the computational complexity. In addition, based on the proposed scheme, a NOPA is also suggested to approach sub-optimal power efficiency with low complexity. Simulation results show that the proposed scheme obtains about 2.1dB and 5.8dB performance gain at outage probability of $10^{-4}$, when compared with the all-relay-forward (6 participated relays) and the single-relay-forward schemes. Furthermore, it obtains the minimum outage probability among all selective relay schemes with the same number of the relays. Meanwhile, it approaches closely to the optimal exhaustive scheme, thus reduce much complexity. Moreover, the proposed NOPA scheme achieves better outage probability than those of the equal power allocation schemes. Therefore, the proposed scheme can obtain good outage probability, low computational complexity and high power efficiency, which makes it pragmatic efficiently in the single-source and multi-relay AF based cooperative networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권10호
• /
• pp.3908-3920
• /
• 2015

In this paper, performance analysis of full-duplex (FD) relay selection under decode-and-forward (DF) relaying mode is carried out by taking into account several critical factors, including the distributions of the received signal-to-noise ratio (SNR) and the outage probability of wireless links. The tradeoff between the FD and half-duplex (HD) modes for relay selection techniques is also analyzed, where the former suffers from the impact of residual self-interference, but the latter requires more channel resources than the former (i.e., two orthogonal channels are required). Furthermore, the impact of optimal power allocation (OPA) on the proposed relay-selection scheme is analyzed. Particularly, the exact closed-form expressions for outage probability of the proposed scheme over Rayleigh fading channels are derived, followed by validating the proposed analysis using simulation. Numerical results show that the proposed FD based scheme outperforms the HD based scheme by more than 4 dB in terms of coding gain, provided that the residual self-interference level in the FD mode can be substantially suppressed to the level that is below the noise power.

• 한국통신학회논문지
• /
• 제29권7C호
• /
• pp.907-914
• /
• 2004

본 논문에서는 적응 변조 시스템에 수신안테나 교환(switching) 기술을 적용한 방식을 제안하고, 해당 방식이 제공하는 평균 비트 전송 속도를 최대로 하는 안테나 교환 임계값을 유도하였으며, 그에 따른 성능을 도출하였다. 아울러 제안한 시스템의 성능을 단일 안테나를 사용하는 적응 변조 시스템 그리고 안테나 선택 다이버시티(selection diversity)를 사용하는 적응 변조 시스템과 레일레이 페이딩 채널 환경에서 심볼 당 평균 비트 수와 송신 중단 확률 측면에서 비교하였다. 성능 비교 결과 심볼 당 평균 2 비트의 정보를 전달한다고 했을 때 제안한 방식은 단일 안테나를 사용하는 방식에 비해 1.4 dB의 SNR 이득이 있으며, 송신 중단 확률이 0.1일때 제안한 방식은 단일 안테나를 사용하는 방식에 비해 약 6 dB의 SNR 이득을 얻을 수 있음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1458-1463
• /
• 2003

This paper presents an improved identification algorithm of active magnetic bearing rotor systems considering sensor and actuator dynamics. An AMB rotor system has both real and complex poles so that it is very hard to identify them together. In previous research, a linear transformation through a fictitious proportional feedback was used in order to shift the real poles close to the imaginary axis. However, the identification result highly depends on the fictitious feedback gain, and it is not easy to identify the additional dynamics including sensor and actuators at the same time. First, this paper discusses the necessity and a selection criterion of the fictitious feedback gain. An appropriate feedback gain minimizes dominant SVD(Singular Value Decomposition) error through maximizing rank deficiency. Second, more improvement in the identification is achieved through separating the common additional dynamics in all elements of frequency response matrix. The feasibility of the proposed identification algorithm is proved with two theoretical AMB rotor models. Finally, the proposed scheme is compared with previous identification methods using experimental data, and a great improvement in model quality and large amount of time saving can be achieved with the proposed method.