• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.274-278
• /
• 2014

Machining performance is often limited by chatter vibration at the tool-workpiece interface. Chatter vibration is a type of machining self-excited vibration which originated from the variation in cutting forces and the flexibility of the machine tool structure. Cutting tooling method is one of major factor to chatter vibration in turning process. Even though lots of cutting tooling methods are developed and used in machining process, precise analysis of cutting tooling effect in view of chatter vibration behavior. This study presents numerical and experimental approaches to verify and effects of various cutting tooling geometry and clamping method on the onset of chatter vibration. Acquired knowledge from this study will apply the optimal geometry design of cutting tooling and adjusting of machining process.

• Journal of Information Technology Applications and Management
• /
• v.12 no.1
• /
• pp.49-68
• /
• 2005

It is one of the crucial components of electronic logistics systems to manage logistics information of cargos and transportation companies and to mediate appropriate brokerage between them. Due to the advance of e-Commerce technologies many kinds of logistics transactions can be handled by means of EDI or XML/EDI applications. but the brokering processing relies mostly on the traditional processes and the research in this field is still at the initial stage. In this paper we study a logistics brokering system for ships and cargos and describe the design and implementation of the system. We analyze the brokering constraints for logistics of cargos and ships and construct an optimization model for their brokering. We also suggest a brokering procedure and a simple heuristic algorithm with respect to the proposed matching criteria. The experimental result shows that the proposed greedy-based heuristic algorithm performs very well. In its response time the proposed algorithm executed within a couple of seconds independently of the number of cargos and the container capacities of ships. The output of the algorithm is very close to that of the optimal solution. showing higher than 95% of approximation. The proposed system is implemented for the Web environment using JSP and PL/SQL.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.586-592
• /
• 2016

The current control of Continuous Conduction Mode(CCM) can be implemented by several methods: peak current control; average current control; and hysteresis control. Among these methods, the hysteresis current control is popularly applied in various converter applications because of its simplicity of implementation, fast current control response and inherent peak current limiting capability. However, a current controller with conventional hysteresis band which multiplies the current reference has the disadvantage that the modulation frequency varies in one cycle of the input voltage and, as a result, generates high switching frequency in the low input voltage section. Also it is complicated to design the input filter due to varying switching frequency. This paper proposed an optimum hysteresis-band current control method where the band is generated by using both multiplication method and sum method to maintain the modulation frequency to be nearly constant. This approach can solve the high switching frequency in the low input voltage section, and achieve easy design of input filter. The performance of the proposed converter is verified with the simulation and the experimental works.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.3
• /
• pp.1-10
• /
• 1997

We present an approach to high-level synthesis for a specific target architecture-partitioned bus architecture. In this approach, we have specific goals of minimizing data transfer length and number of buses in addition to common synthesis goals such as minimizing number of control steps and satisfying given resource constraint. Minimizing data transfer length and number of buses can be very important design goals in the era of deep submicron technology in which interconnection delay and area dominate total delay and area of the chip to be designed. in partitioned bus architecture, to get optimal solution satisfying all the goals, partitioning of operation nodes among segments and ordering of segments as well as scheduling and allocation/binding must be considered concurrently. Those additional goals may impose much more complexity on the existing high-level synthesis problem. To cope with this increased complexity and get reasonable results, we have employed two ideas in ur synthesis approach-extension of the target architecture to alleviate bus requirement for data transfer and adoption of genetic algorithm as a principal methodology for design space exploration. Experimental results show that our approach is a promising high-level synthesis mehtodology for partitioned bus architecture.

• Korean journal of food and cookery science
• /
• v.23 no.6
• /
• pp.954-960
• /
• 2007

The study was designed to determine optimum extraction conditions, by the factorial design of 3 variables and 3 levels using an a RSM program. To determine the optimal conditions for the extraction of black tea with chamomile, the experimental design was applied. The independent factors were the extraction temperature ($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$), extraction time (2 min, 4 min, 6 min), and chamomile addition (0.3%, 1.0%, 1.7%). By the RSM (response surface methodology) analysis of the black tea with chamomile extraction, we found that the extraction temperature greatly affected the extraction yield, brix, pH, and reducing sugar, caffeine, theobromine and theophillin contents. The optimum extraction time, temperature, and chamomile content were 4 min, $90^{\circ}C$, and $1.6{\sim}1.7%$, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.329-336
• /
• 2003

Intra-Vascular Ultra-Sound (IVUS) transducers were developed for the application to diagnose coronary diseases. The transducer consists of 32 piezoelectric elements with a front insulation layer and a polymeric acoustic backing layer on a hollow alumina tube. The optimal geometrical structure of the transducer was designed through theoretical analysis of radiation patterns of the transducer. Samples of the IVUS transducers of the diameter of 3㎜ were fabricated to illustrate the design scheme. For the piezoelectric elements, 2-2 mode piezocomposite materials were employed. Experimental performance of the transducers showed good agreement with the design results, which verified feasibility of the transducer for IVUS applications.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.2
• /
• pp.318-329
• /
• 2014

The purpose of this study was to determine the optimal mixing ratio of Allium hookeri powder and butter in the preparation of bread. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 10 experimental points, including 2 replicates for Allium hookeri powder and butter. Further, the mechanical and sensory properties of test materials were measured. A canonical form and perturbation plot conveyed the influence of each ingredient on the final product mixture. Overall, the measurement results of the mechanical properties showed a significant increase or decrease in dough pH, sweetness, volume, weight, height, specific volume, a & b-value of crumb and, springiness (p<0.05). Moreover, the sensory measurements demonstrated a significant improvement in color, appearance, texture, moistness and, overall quality. As a result, the optimum formulation from the numerical and graphical methods was calculated as 22.65 g of Allium hookeri powder and 47.77 g butter. After optimization, DPPH free radical scavenging activity, total phenolic content, and total plate counts over 10 days were evaluated. In sum, the results revealed the antioxidant and antibiotic actions of bread with Allium hookeri powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.253-260
• /
• 2012

IGBT (insulated gate bipolar transistor) have received wide attention because of their high current conduction and good switching characteristics. To reduce the power loss of IGBT, the on state voltage drop should be lowered and the switching time should be shorted. However, there is Trade-off between the breakdown voltage and the on state voltage drop. To achieving good electrical characteristics, field stop IGBT (FS IGBT) is proposed. In this paper, 1,200 V planar gate non punch-through IGBT (planar gate NPT IGBT), planar gate FS IGBT and trench gate FS IGBT is designed and optimized. The simulation results are compared with each three structures. In results, we optain optimal design parameters and confirm excellence of trench gate FS IGBT. Experimental result by using medici, shows 40% improvement of on state voltage drop.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.184-190
• /
• 2010

Recently, the polishing process using magnetorheological fluids(MR fluids) has been focused as a new ultra-precision polishing technology for micro and optical parts such as aspheric lenses, etc. This method uses MR fluid as a polishing media which contains required micro abrasives. In the MR polishing process, the surface roughness and material removal rate of a workpiece are affected by the process parameters, such as the properties of used nonmagnetic abrasives(particle material, size, aspect ratio and density, etc.), rotating wheel speed, imposed magnetic flux density and feed rate, etc. The objective of this research is to predict MRR according to the polishing conditions based on the multiple regression analysis. Three polishing parameters such as wheel speed, feed rates and current value were optimized. For experimental works, an orthogonal array L27(313) was used based on DOE(Design of Experiments), and ANOVA(Analysis of Variance) was carried out. Finally, it was possible to recognize that the sequence of the factors affecting MRR correspond to feed rate, current and wheel speed, and to determine a combination of optimal polishing conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1596-1607
• /
• 2000

The optimal design of auto-catalyst needs a good compromise between the pressure drop and flow uniformity in the substrate. One of the effective methods to achieve this goal is to use the concept of radially variable cell density. But this method has not been examined its usefulness in terms of chemical behavior and conversion performance. In this work, two-dimensional performance prediction of catalyst coupled with turbulent reacting flow simulation has been used to evaluated the benefits of this method n the flow uniformity and conversion efficiency. The results showed that two cell combination of 93cpsc and 62 cpsc was the most effective for improved pressure drop and conversion efficiency due to balanced space velocity and efficient usage of geometric surface area of channels. It was also found that large temperature difference between the bricks in case that the edge of the frontal face of brick has too much lower cell density(less than 67% of cell density of the center of the brick). This study has also demonstrated that the present computational results show the better prediction accuracy in terms of CO, HC and NO conversion efficiencies compared to those of conventional 1-D adiabatic model by comparison with experimental results.