• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2024

In this study, we constructed a process simulation model for an agricultural by-products based Solid Oxide Fuel Cell (SOFC) combined heat and power generation system as part of the introduction of technology for energy self-sufficiency in the agricultural sector. The aim was to reduce the burden of increasing fuel and electricity consumption due to rapid fluctuations in international oil prices and the expansion of smart farming in domestic farms, while contributing to the national greenhouse gas reduction goals. Based on the experimental results of 0.3 ton/day torrefied agricultural by-product gasification experiment, a model for an agricultural by-product-based SOFC cogeneration system was constructed, and optimization of the heat exchange network was conducted for SOFC capacities ranging from 4 to 20 kW. The results indicated that an 8 kW agricultural by-product-based SOFC cogeneration system was optimal under the current system conditions. It is anticipated that these research findings can serve as foundational data for future commercial facility design.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.26-35
• /
• 2013

Outbreak of animal infectious diseases such as foot-and-mouth disease, avian influenza are becoming prevalent worldwide. For prevent the further infection, tremendous numbers of the infected or culled stocks are buried around farm. This burial method can generate a wide range of detrimental components such as leachate, nutrient, salt, and pathogenic bacteria, consequently. In this study, for the stabilization of livestock carcasses leachate, advanced oxidation processes utilizing the Fenton reaction was investigated in lab-scale experiments for the treatment for $COD_{Cr}$ of livestock carcass leachate. $COD_{Cr}$ reduction by the Fenton oxidation was investigated response surface methodology using the Box-Begnken methods were applied to the experimental results. A central composite design was used to investigate the effects of the independent variables of pH ($x_1$), dosage of $FeCl_2{\cdot}4H_2O$ ($x_2$) and dosage of $H_2O_2$ ($x_3$) on the dependent variables $COD_{Cr}$ concentration ($y_1$). A 1 M NaOH and $H_2SO_4$ was using for pH control, $FeCl_2{\cdot}4H_2O$ was used as iron catalyst and NaOH was used for Fenton reaction. The optimal conditions for Fenton oxidation process were determined: pH, dosage of $FeCl_2{\cdot}4H_2O$ and dosage of $H_2O_2$ were 3, 0.6 g (0.0151 M) and 7 mL(0.259 M), respectively. Statistical results showed the order of significance of the independent variables to be pH > initial concentration of ferrous ion > initial concentration of hydrogen peroxide.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.4
• /
• pp.23-29
• /
• 2017

As the Enforcement Ordinance of Environmental Policy Act was revised in 2013, Total Organic Carbon (TOC) was added as an indicative parameter for organic matter in Water and Aquatic Ecosystem Environmental Criteria. Under these imminent circumstances, a regulatory standard is needed to achieve the proposed TOC limitation control water quality from the STP (Sewage Treatment Plant). In this study, a electrolysis utilizing the electrochemical reaction was investigated in lab-scale experiments for the treatment of TOC in sewage effluent. TOC reduction by a electrolysis was investigated response surface methodology using the Box-Begnken methods were applied to the experimental results. A central composite design was used to investigate the effects of the independent variables of electrode space ($x_1$), current density ($x_2$) and electrolyte concentration ($x_3$) on the dependent variables removal efficiency of TOC (y). The optimal conditions for electrolysis were determined: electrode space, current density and electrolyte concentration were 50 mm, $10.3mA/cm^2$ and 0.1M, respectively. Statistical results showed the order of significance of the independent variables to be electrode space > current density > electrolyte concentration.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.131-146
• /
• 2004

As Electronic Commerce(EC) has been emerged and has developed, many researchers have tried to establish EC framework for automated contract and negotiation using agent technologies. Traditional researches, however, often had limitations. They often enforced the user's participations during the automated contract process of agents. They also could only consider a few of the user's requirements for a specific goods and did not have supported the procedures and methodologies for making the best contract. In this paper, we propose business model on EC based on multiagents to overcome the defects of the previous researches. We apply CSP techniques to brokerage process to satisfy various preferential requirements from the user. We also propose efficient negotiation mechanism using negotiation model of game theory. The contract candidates automatically negotiate and mediate in terms of their benefits through the proposed negotiation mechanism. For the optimal brokerage and automated negotiation, the agents process activities for contract on three layers, which are called competition layer, constraint satisfaction layer and negotiation layer in the proposed model. We also design the message driven communication protocol to support the automated contract among the agents. Finally, we have implemented prototype systems applying the proposed model and have shown the various experimental results for efficiency of the proposed model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.427-434
• /
• 2008

Processing of collagen from yellowfin tuna (Thunnus albacares) abdominal skins was optimized by response surface methodology and central composite design. The values of independent variables at optimal conditions were NaOH concentration: 0.5 N, NaOH treatment time: 36.2 hr, pepsin concentration: 1:4.9 ratio (0.245%, w/v), and digestion time: 48.1 hr, respectively. The collagen content estimated under optimal conditions was 33.1%, and the actual experimental collagen content was 32.3%. Physicochemical properties of collagen from yellowfin tuna abdominal skin were investigated by amino acids analysis, SDS-PAGE, FT-IR, viscosity and denaturation temperature. Amino acids content of the collagen was 21.0%. SDS-PAGE pattern of the collagen showed two different $\alpha$-chain (${\alpha}_1$- and ${\alpha}_2$- chain), $\beta$-component and $\gamma$-component. The spectrum of FT-IR of the collagen showed wavenumber at 3,434, 1,650, 1,542 and $1,235\;cm^{-1}$ representing the regions of amide A, I, II and III, respectively. Relative viscosity of the collagen decreased continuously on heating up to $32^{\circ}C$, and the rate of decrease was retarded in the temperature range of $35-50^{\circ}C$. Denaturation temperature (Td) of the collagen solution (0.06%, w/v) was $31^{\circ}C$ and was lower than calf skin collagen ($35^{\circ}C$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1731-1737
• /
• 2000

This study was conducted to investigate the effects of threonine:lysine ratios on growth performance, apparent nutrient digestibility and blood urea nitrogen (BUN) concentration, and to estimate the optimal threonine:lysine ratios for growing barrows and gilts. A total of 150 pigs (Landrace${\times}$Yorkshire${\times}$Duroc, $16.75{\pm}0.42kg$ average body weight, 75 barrows and 75 gilts) was randomly allotted into six treatments in a $2{\times}3$ factorial design. Six diets were formulated to contain 1.12% lysine for barrows and 1.33% lysine for gilts with three threonine:lysine ratios (50, 60 and 70%) for both barrows and gilts. Throughout the whole experimental period (16 to 56 kg body weight), there was no interaction between sex and dietary threonine:lysine ratio in average daily gain (ADG), average daily feed intake (ADFI) and feed conversion rate (FCR). Between sexes, there was a clear sex-effect showing better growth performance of barrows. Barrows consumed more feed (p<0.01) and grew faster (p<0.01) than gilts. For barrows, there was a trend to improved ADG and FCR with increasing threonine:lysine ratio. For gilts, there was a trend to improved ADG and FCR up to threonine:lysine ratio of 60%, but not significant. There was no interaction between sex and threonine:lysine ratio in nutrient digestibilities of growing pigs except for crude ash (CA). Between sexes, there were differences in nutrient digestibilities, except for calcium for which gilts showed higher a digestibility (p<0.01). Among dietary threonine:lysine ratios, there were no differences in nutrient digestibilities. Mean values of essential amino acids (EAA), non-essential amino acids (NEAA) and total amino acids (TAA) digestibilities were not affected by sex and dietary threonine:lysine ratio. There was no evidence of an interaction between sexes and dietary threonine:lysine ratio. Between sexes, total BUN concentration was lower in gilts than barrows (p<0.05). It was concluded that a 70 and 60% dietary threonine:lysine ratio for barrows (1.12% lysine) and gilts (1.33% lysine) tended to result in better growth performances and nutrient utilization and lower BUN concentration than other threonine:lysine ratios.

• Korean Journal of Food Science and Technology
• /
• v.52 no.3
• /
• pp.290-295
• /
• 2020

In this study, the optimum conditions were established for anthocyanidin extraction from sweet potato tips and tubers. The dependent variables of ethanol concentration (X1), citric acid concentration (X2), and extraction temperature (X3) were designed using a central composite design. All three variables significantly affected anthocyanidin extraction, and the influence of X1 was greater than that of X2 and X3. The highest anthocyanidin content in tips and tubers were 26.58±0.07 and 117.32±0.39 mg/100 g at 50% (X1), 0.3% (X2), and 50℃ (X3), respectively. The optimal extraction conditions for the tips were 56.10% (X1), 0.25% (X2), and 52.24℃ (X3) and tubers were 55.08% (X1), 0.30% (X2), and 53.06℃ (X3). The predicted values under optimal extraction conditions were 27.45 and 119.61 mg/100 g, and the experimental values were 27.09±0.11 and 118.72±0.67 mg/100 g, respectively. The extraction conditions were validated by comparing the predicted and actual values with those of 98.69 and 99.26%, respectively.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1729-1737
• /
• 2010

This study was conducted to establish the optimal medium condition for the animal probiotic Lactobacillus plantarum by using onion juice. Cell yield and antioxidant activity increased in proportion to high additive levels of onion juice in medium. Onion juice, sucrose and yeast extract were selected as media ingredient factors and the effects of their mixed ratio in medium were evaluated. The full factorial design consisted of 24 experimental runs and was employed to estimate the main effects of the factors and their interactions. Significant positive effects on cell yield and antioxidant activity was shown with yeast extract and onion juice, respectively. Significant interaction was found only between sucrose and yeast extract in antioxidant activity. Finally, we selected an optimal medium that was composed of (g/l) onion juice, 600; sucrose, 15; yeast extract, 5. The efficiency of this optimum medium was estimated by using a 5 l jar fermenter. As a result, the maximum cell yield was $9.7\;{\log}_{10}$ (CFU/ml) at 12 hr. Cell yield at the end of incubation (20 hr) was $8.9\;{\log}_{10}$ (CFU/ml) and it was very similar with the predicted value, $9.0\;{\log}_{10}$ (CFU/ml). Antioxidant activity of culture was maintained at about 60~65% during all incubation time, resulting in a higher-than-predicted activity of 47.1%.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.689-697
• /
• 2017

As a fundamental study to apply the new flocculation method using ballast in water treatment process, the optimal conditions for general and ballast coagulant dosage, and pH, which are known to have a significant influence, were derived by response surface methodology. Poly aluminum chloride (PAC) and magnetite ballast were used as a general coagulant and ballast, respectively. Coagulation experiments were performed by jar-tester using the kaolin based synthetic water. The effects of three independent variables (pH, PAC, and ballast) on response variables (turbidity removal rate and average settling velocity of flocs) and the optimum condition of independent variables to induce the optimum flocculation were obtained by 17 experimental conditions designed by Box-Behnken procedure. After performing experiments, the quadratic regression model was derived for each of response variables, and the response surface analysis was conducted to explore the correlation between independent variables and response variables. The $R^2$ values for the turbidity removal rate and the average settling velocity were 0.9909 and 0.8295, respectively. The optimal conditions of independent variables were 7.4 of pH, 38 mg/L of PAC and 1,000 mg/L of ballast. Under these conditions, the turbidity removal rate was more than 97% and the average settling velocity exceeded 35 m/h.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.12-18
• /
• 2024

High-rise, large-scale, and diversification of buildings are possible, and the reduction of concrete cross-sections reduces the weight of the structure, thereby increasing or decreasing the height of the floor, securing a large number of floors at the same height, securing a large effective space, and reducing the amount of materials, rebar, and concrete used for designating the foundation floor. In terms of site construction and quality, a low water binder ratio can reduce the occurrence of dry shrinkage and minimize bleeding on the concrete surface. It has the advantage of securing self-fulfilling properties by improving fluidity by using high-performance sensitizers, making it easier to construct the site, and shortening the mold removal period by expressing early strength of concrete. In particular, with the rapid development of concrete-related construction technology in recent years, the application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher is expanding in high-rise buildings. However, although high-rise buildings with more than 120 stories have recently been ordered or scheduled in Korea, the research results of developing ultra-high-strength concrete with more than 130 MPa class considering field applicability and testing and evaluating the actual applicability in the field are insufficient. In this study, in order to confirm the applicability of ultra-high-strength concrete in the field, a preliminary experiment for the member of a reduced simulation was conducted to find the optimal mixing ratio studied through various indoor basic experiments. After that, 130 MPa-class ultra-high-strength concrete was produced in a ready-mixed concrete factory in a mock member similar to the life size, and the flow characteristics, strength characteristics, and hydration heat of concrete were experimentally studied through on-site pump pressing.