• 한국항행학회논문지
• /
• 제12권3호
• /
• pp.201-207
• /
• 2008

대용량 WDM 전송 시스템의 구현을 위해 중간에 광 위상 공액기 (optical phase conjugator)를 갖는 광섬유에서 축적된 분산량을 precompensation과 postcompensation으로 조절하는 분산 제어 (DM; dispersion management) 전송 링크의 설계 기준을 제시하였다. 본 논문에서 살펴본 DM 구조는 precompensation과 postcompensation가 이루어지는 위치에 따라 bi-end 형태와 concentration 형태의 두 가지이다. 전송 링크 설계 파라미터인 송신기부터 OPC까지의 구간과 OPC부터 수신기까지의 유효 잉여 분산 범위는 OPC에 대해서만 대칭되어 있으면 precompensation과 postcompensation을 수행하는 분산 보상 광섬유(DCF; dispersion compensating fiber)의 위치에 크게 의존하지 않는다는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제30권6A호
• /
• pp.510-516
• /
• 2005

본 논문은 고속 광 이더넷에서 최소 대역폭 특성을 지닌 선로 부호에 의한 전송 성능의 개선 가능성을 제시하고자 선로 부호의 파라미터들을 조사 분석하고, 동일한 광 이더넷에서 최소 대역폭 특성이 있는 선로 부호(MB810)와 기존의 선로 부호(8B/10B)로 각각 부호화된 데이터를 전송하는 시뮬레이션을 수행하였다. 시뮬레이션 환경은 10기가비트 이더넷의 표준에 있는 Serial type LAN PHY 10GBASE-E 물리 계층을 사용한 단일 채널 전송 광 이더넷과 WDM type LAN PHY 10GBASE-LX4 물리계층을 사용한 다중 채널 전송 광 이더넷으로 구현되었다. 또 MB810 선로부호의 최소 대역폭 특성을 확인하고 두 선로부호에 의한 전송 성능을 비교하기 위하여 수신 광 파워에 따른 비트 오율(BER)을 비교하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 인터넷정보학회논문지
• /
• 제2권1호
• /
• pp.87-96
• /
• 2001

본 논문에서는 보다 높은 대역폭에서 안전한 멀티캐스트 통신을 하고자, 즉 최근 화상회의나 인터넷 방송과 같은 인터넷상의 멀티캐스트 트래픽이 급증하고 있는 현실에서 광 전송기술을 이용한 트래픽의 분산과 네트워크 상에서의 전송률 향상에 대하여 제안한다. 본 논문에서 제안하는 방법에서는 Add-Drop Mux/Demux의 특성 및 각 단의 출력 특성과 간섭계의 경로길이의 변화에 따른 특성을 고찰하고 그 특성에 따른 최적의 설계 데이터를 제시하여 기존의 음성 및 텍스트 중심의 전송에서 발생하는 트래픽의 문제점을 고찰하고, 이에 따른 해결 방안으로 현재 주요 통신분야인 멀티미디어, 인터넷에서의 트래픽의 혼잡 상황에 대하여 광 전송기술을 통해 전송률을 높일 수 있음을 볼 수 있다.

• ETRI Journal
• /
• 제34권1호
• /
• pp.122-125
• /
• 2012

A video signal through a high-density optical link has been demonstrated to show the reliability of optical link for high-data-rate transmission. To reduce optical point-to-point links, an electrical link has been utilized for control and clock signaling. The latency and flicker with background noise occurred during the transferring of data across the optical link due to electrical-to-optical with optical-to-electrical conversions. The proposed synchronization technology combined with a flicker and denoising algorithm has given good results and can be applied in high-definition serial data interface (HD-SDI), ultra-HD-SDI, and HD multimedia interface transmission system applications.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.272-273
• /
• 2004

Optical connector is prone to take environment attack since it is exposed to various environmental conditions. As the data bit rate is increased in the modern optical communication system. the stability of optical connector becomes more important issue in complex network comprising of many connection by connectors. In this research, to estimate the influence of defects of connector, especially surface scratches, on the transmission, surface scratches were intentionally introduced on the cross sectional surface of optical connector and the insertion loss, return loss. and BER were measured as functions of geometry and density of scratches, Environmental conditioning was also performed onto these connectors and the variations of basic optical characteristics mentioned above were measured. Based on this measurement the lifetime of connectors was estimated by statistical prediction method.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.121-128
• /
• 2021

We propose a novel, tiny optical receiver engine utilizing an all-in-one package based on embedded optics technology. The package's best transmission S21 and reflection S22 opto-electric (OE) bandwidths are 49.8 GHz and 34.9 GHz, respectively, and the reflectance of the optical engine is below -31.7 dB for all channels. The engine satisfies the MIL-STD-883G standard for reliability tests, such as mechanical and thermal shock, and vibration resistance. The sensitivity after 10 km single-mode fiber (SMF) transmission is below -8 dBm. The optical receiver engine is cost-competitive and applicable for 400G coarse wavelength division multiplexing 4 (CWDM4) 10 km optical transceivers.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.334-339
• /
• 2015

Terabit-per-second (Tb/s) transmission capacity for the next generation of long-haul communication networks can be achieved using multicarrier optical super-channel technology. In an elastic orthogonal frequency division multiplexing (OFDM) super-channel transmission system, demultiplexing a portion of an entire spectrum in the form of a subband with minimum power is critically required. A major obstacle to achieving this goal is the analog-to-digital converter (ADC), which is power-hungry and extremely expensive. Without a proper ADC that can work with low power, it is unrealistic to design a 100G coherent receiver suitable for a commercially deployable optical network. Discrete Fourier transform (DFT) is often seen as a primary technique for understanding partial demultiplexing, which can be attained either optically or electronically. If fairly comparable performance can be achieved with an all-optical DFT circuit, then a solution independent of data rate and modulation format can be obtained. In this paper, we investigate two distinct OFDM super-channel receiver models, based on electronic and all-optical DFT-technologies, for partial carrier demultiplexing in a multi-Tb/s transmission system. The performance comparison of the receivers is discussed in terms of bit-error-rate (BER) performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.108-111
• /
• 2000

We will illustrate the topographical structure and optical structure of the merocyanine dye LB films obtained by the scanning near-field optical/atomic force microscopy (SNOAM). SNOAM was recognized as a powerful tool to modify the surface as well as to characterize the topography of the surface at atomic resolution, especially for optical reaction materials. SNOAM images showed that the topographical and optical structures of these films were not only depended on the chemical property but also physical property. In the continuous measurement on these dyes, the appearance of near-field optical transmission images showed a certain dependence on the kinds of dyes and the mutual mixing ratios of dyes. These experimental results suggest that there is a certain kind of interaction between these two dyes.

• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.595-600
• /
• 2015

전통적인 midway 광 위상 공액기 (OPC; optical phase conjugator)가 아닌 non-midway OPC를 분산 제어 (DM; dispersion-managed) 광전송 링크에 적용하여 파장 분할 다중 전송 (WDM; wavelength division multiplexed)을 위한 융통적인 네트워크의 구성 가능성을 분석하였다. 중계 구간의 수가 많을수록, 또한 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 클수록 non-midway OPC를 통한 유연한 링크의 구성 가능성이 커지는 것을 확인하였다. 아울러 OPC 이후의 후반 전송 구획을 구성하는 각 중계 구간의 RDPS를 OPC 이전의 전반 구획의 RDPS의 평균값으로 설정하는 링크 구조가 융통적 링크 구성에 더욱 유리하다는 것을 확인하였다.