• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1108-1116
• /
• 1993

Y-branch directional coupler optica1 switches with two different coupling lengths are fabricated on z-cut LiNbO3 and tested at r = 1.3 rm. The normal mode and coupled mode theories are utilized to calculate device coupling length and switching voltage. Simulation of the beam propagation method (BPM) is also performed to confirm the device coupling lengths. For dc operation, experimental results are in good agreement with the modee theories expectation.

• Current Optics and Photonics
• /
• v.4 no.2
• /
• pp.127-133
• /
• 2020

We successfully constructed a passively Q-switched Yb:YAG laser ignitor pumped by a diode laser with low power and long pulse width. To the best of our knowledge, this is the first study to achieve a quasi-MW output power from an optimized Q-switch Yb:YAG laser ignitor by using a pumping diode laser module emitting at under a power of 23 W. The output pulse energy of our optimized laser is 0.98 mJ enclosed in a 1.06 ns pulse width, corresponding to a peak power of 0.92 MW.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.154-157
• /
• 1999

Photonic Slot Routing(PSR) is a promising approach to solve the fundamental scalability problem of all-optical packet switched WDM networks. In photonic slot routing, packets destined for the same subnetwork are aggregated to form a photonic slot which is jointly routed as a single unit of information through the network. The relative location of the nodes from bridge may cause to fairness problem in the unidirectional WDM ring network based on PSR. As photonic slots from different subnetworks can originate contentions at the bridge, packets may be dropped and retransmitted. Thus we evaluated the performance of PSR based WDM ring network in the point of fairness for each node and slot contentions at the bridge. Simulation results show that the PSR based WDM ring requires a slot access mechanism to guarantee the transmission fairness and efficient switch architecture to resolve slot contention at the bridge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.42-47
• /
• 2000

A new method for stabilizing the bias of an Electro-Optic mach-Zehnder modulator has been developed to maximize the switching extinction ratio in burst mode packet traffic. By sampling and minimizing the off-level output power of the modulator, a high extinction optical gate switch in obtain regardless of the variation of the packet traffic density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.31-35
• /
• 2005

A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. A demonstrator of this concept is made. We will discuss measurements and numerical simulations of the key optical characteristics of this display. The switching characteristics of LC-filled lenticular lenses are discussed and the overlap of the view distributions is introduced as a figure of merit for crosstalk. The 0.62 overlap in our present demonstrator design, gives an excellent 3D image quality, combined with a good depth impression.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.234-237
• /
• 1996

The amorphous chalogenide semiconductors are new material in semiconductor physics. Their properties, especially electronic and optical properties are main motives for device application. Amorphous As$_{10}$Ge$_{15}$ Te$_{75}$material has the stable ac conductivity at high frequency and the dc memory switching property. At higher frequency than 10MHz, ac conductivity of As$_{10}$Ge$_{15}$ Te$_{75}$ thin film is much higher than below frequency and independent of temperature and frequency. If the dc voltages are applied between edges of thin film, one can see the dc memory switching phenomenon, in other words the dc conductivity increases quite a few of magnitude after the threshold voltage is applied. Using the stable ac conductivity at high frequency and the increase of conductivity after dc memory switching, As$_{10}$Ge$_{15}$ Te$_{75}$thin film is considered as new material for microwave switch devices.vices.es.vices.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.102-103
• /
• 2013

As an important p-type semiconductor metal oxide with a narrow band gap (1.2 - 2.6eV), copper oxide (Cu2O) has been studied because of its various applications as material for heterogeneous catalysts, gas sensors, optical switch, lithium-ion electrode materials, field emission devices, solar cells. The fundamental properties of oxide-semiconductor can be greatly affected by the surface morphology, size, geometry and spatial orientation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.157.1-157.1
• /
• 2013

외부 Ballast Capacitor를 이용한 Voltage Doubler 전원장치를 이용하여 Micro size의 대기압 플라즈마를 발생장치를 개발하였다. 2개의 외부 Capacitor를 병렬로 연결하여 충전한 다음 외부 Capacitor를 직렬로 연결하여 전압을 2배압 시킨 상태에서 방전이 일어나도록 하였다. Capacitor의 충 방전 제어는 Switch Device인 Insulated Gate Bipolar Transistor (IGBT)를 사용하였다. 개발된 대기압 플라즈마는 외부 Capacitor와 인가전압을 독립적으로 변화시킬 수 있기 때문에 방전 시 전류 전압을 독립적으로 제어할 수 있으며 용도에 따라 Glow 방전에서 Arc 방전까지 제어가 가능하다. 본 연구에서는 900 V의 1.22 nF 외부 Capacitor 방전과 400 V의 10 nF 외부 Capacitor 방전을 비교하였다. 방전 시 전압파형과 전류파형은 서로 다르지만 소비된 방전에너지는 340 ${\mu}J$로 동일하다. ICCD camera와 Spectrometer를 이용하여 비교 분석을 실시하였다. 방전 image 및 Optical Emission Spectroscopy 분석을 이용하여 플라즈마의 온도, 밀도 등을 시간적, 공간적으로 분석하였다.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.34-39
• /
• 2005

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time(JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.