• 신재생에너지
• /
• 제17권1호
• /
• pp.40-49
• /
• 2021

In this study, the optical properties, heat transfer capabilities and chemical reaction performance of a methane thermal decomposition reactor using solar heat as a heat source were numerically analyzed on the basis of the cavity shape. The optical properties were analyzed using TracePro, a Monte Carlo ray tracing-based program, and the heat transfer analysis was performed using Fluent, a CFD program. An indirect heating tubular reactor was rotated at a constant speed to prevent damage by the heat source in the solar furnace. The inside of the reactor was filled with a porous catalyst for methane decomposition, and the outside was insulated to reduce heat loss. The performance of the reactor, based on cavity shape, was calculated when solar heat was concentrated on the reactor surface and methane was supplied into the reactor in an environment with a solar irradiance of 700 W/㎡, a wind speed of 1 m/s, and an outdoor temperature of 25℃. Thus, it was confirmed that the heat loss of the full-cavity model decreased to 13% and the methane conversion rate increased by 33.5% when compared to the semi-cavity model.

• 한국광학회지
• /
• 제7권4호
• /
• pp.434-439
• /
• 1996

본 연구에서는 가우스 진폭을 갖는 입사광의 단락된 정도와 광학 디스크 상의 bump의 형태가 재생신호에 미치는 영향과 디스크 bump에 맺히는 회절광 PSF(point spread function)와의 관계를 알아보기 위해 스칼라 회절 이론을 사용하였다. 단락된 가우스 진폭으로 .sigma.=0, 0.5, 1.5, 2.5인 경우를 고려하였으며 bump의 높이는 n.DELTA.$_{o}$ =.lambda./4로서 이는 위상 높이 .PHI.$_{o}$ =.pi.가 된다. 또한 본 연구에서 고려한 bump 형태 즉 직사각형(.DELTA.p$_{o}$ =0)과 준 원추형(.DELTA.p$_{o}$ /2) 그리고 원추형(.DELTA.p$_{o}$ =p$_{o}$ )의 세 가지 경우이다. 본 연구에서 고려한 입사광의 단락된 정도가 작을 수록 bump에 맺는 중심 회절상의 반경이 작게 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 작을수록 bump에 맺는 중심 회절상의 반경이 작계 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 큰 경우보다 크게 나타났고 bump의 크기도 작게 나타났다. 이러한 결과들로부터 입사광의 단락된 정도가 작을수록 광학 디스크로부터 큰 재생 신호를 얻을 수 있으며 cross-talk가 줄어듬을 알 수 있었다. 그러므로 실제 광학 디스크에 가능한 단락된 정도가 작은 가우스 진폭을 갖는 레이저 광을 입사광으로 사용하면 유용하리라 생각된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.127.4-127
• /
• 2001

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. A number of visual or optical technologies have been successfully applied to measure three dimensional surfaces. Especially, the shape measurement using an interferometric principle becomes a successful methodology. However, those conventional interferometric methods to measure surface profile have an inherent shortcoming, namely 2∏ ambiguity problem. The problem inevitably happens when the object to be measured has discontinuous shape due to the repetition of interferometric signal with phase period of 2∏. Therefore, in this paper, we choose as a shape measuring method, ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.43-46
• /
• 2000

Optical triangulation displacement sensors(0TDSs) are widely used for their simple struchlre, high resolution, and long operating range. However, there are several factors that must be taken into account in order to obtain high accuracy and reliability Measurement errors from inclinations a？ an object surface, prohe signal fluctuations generated by speckle effects. power vanation of a light source, electronic noises, and so on. Previous models of OTDSs can not show reasonable behavior as change of surface inclination and shape of light intensity distribution on the detector. In this paper, we propose a new and reasonable modeling for diffise-type OTDSs based on a geometrical optics. To verify propriety of new modeling, we take basic experiments. Shape of light intensity distribution is asymmetric in both simulation result and experimental result. Both simulation result and experimental result show same tendency of light intensity distribution movement as changing surface inclination

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.462-467
• /
• 2003

For the Space-borne optical imaging payload system design, light weighting and moderate stiffness of mirror and/or mirror fixation device is very important aspects. The front surface of mirror is regulated by optical performance requirement, but the shape of backplate of mirror is to be optimised while satisfing the required stiffness and weight. According to the results, the best shape of backplate cell is triangular. And also related geometric dimensions and the optimised mounting point of MFD(Mirror Fixation Device) is presented. Finally, natural frequencies and shpaes of mirror structure are analysed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.464-467
• /
• 2009

The grating projection method with phase-shifting technique is very useful in measuring the 3-dimensional (3D) shape with high accuracy and speed. In this work, we have developed an ultra high-speed digital laser grating projection system using a high-power laser diode and a highsensitivity CMOS camera. With our system, the optical measurement required to find out the profile of a 3D object could be carried out within 2.6 ms, which is a significant ($\sim$10 times) improvement compared with those of the previous studies.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.147-153
• /
• 1996

For shape invariant recognitin of korean characters iwth noise, an optical wavelet SDF filter is proposed To preserve the features of a reference image and inimize effects of a random noise in the inpt image wavelet transformed images with different dialation parameters are used. And to adapt to divese variations in the combinatorial form, eCP-SDF filter synthesis algorithm is used. The proposed optical wavelet SDF filter is the type of the matched filter so that it can use the structure of 4f optical correlation system. The computer simulation results show that the proposed filter is useful in the noisy input.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.882-884
• /
• 2005

A new rectangular shape microlens array having high sag for solid-state lighting is presented. Proposed microlens, which has high sag, over $375{\mu}m$ and large diameter, over 3 mm can enormously enhance output optical extraction efficiency. Rectangular shape of microlens can maximize the fill factor of light-emitting-diode (LED) package and minimize the optical loss at the same time. This wafer level microlens array is fabricated on LED package. It has many advantages in optical properties, low cost, high aligning accuracy, and mass production.