• 제목/요약/키워드: optical sensors

검색결과 1,135건 처리시간 0.031초

3D 렌더링 및 실시간 물체 검출 기능 탑재 캔위성 시스템 개발 (Development of CanSat System With 3D Rendering and Real-time Object Detection Functions)

  • 김영준;박준수;남재영;유승훈;김송현;이상현;이영건
    • 한국항공우주학회지
    • /
    • 제49권8호
    • /
    • pp.671-680
    • /
    • 2021
  • 본 논문은 정찰용 하드웨어와 소프트웨어를 설계하고 제작하여 캔위성 플랫폼과 지상국에 탑재 후 기능을 검증한 내용을 다루고 있다. 주요 정찰 임무는 크게 2가지로 구성되는데, 레이더와 GPS, IMU 센서를 이용해 주변 지형을 3D로 렌더링하는 지형탐색과 광학 카메라 영상분석을 통한 실시간 주요 물체 검출이다. 그리고 캔위성 시스템의 완성도를 높이기 위해 GUI 소프트웨어를 통해 데이터 분석효율을 향상하였다. 구체적으로 지형정보와 물체 탐지정보를 실시간으로 지상국에서 확인할 수 있는 소프트웨어를 제작하였으며, 비정상패킷 예외처리와 시스템 초기화 기능을 통해 임무 실패를 방지하였다. 통신계는 LTE와 AWS 서버를 통한 통신을 메인 채널로 사용했고, 보조 채널로 지그비를 사용하였다. 완성된 캔위성을 로켓 발사 방식과 드론 탑재 방식으로 공중 낙하 실험하였다. 실험 결과, 지형탐색과 물체 검출 성능이 우수하였으며, 모든 결과를 실시간으로 처리 후 지상국 소프트웨어에 성공적으로 시현하였다.

초분광센서를 활용한 낙동강 하류부 남조류세포수 추정식 개발에 관한 연구 (A study on the development of a Blue-green algae cell count estimation formula in Nakdong River downstream using hyperspectral sensors)

  • 김광수;최재윤;남수한;김영도;권재현
    • 한국수자원학회논문집
    • /
    • 제56권6호
    • /
    • pp.373-380
    • /
    • 2023
  • 국내 이상기후현상과 기후변화로 인해 하천, 호소에 조류의 과대성장이 빈번히 발생하고 있다. 하천의 조류는 녹조류, 남조류, 규조류, 기타조류 등으로 분류되며, 남조류 중 일부 종은 악취 유발과 독성물질의 배출로 문제를 야기하고 있다. 국내에서는 조류경보제를 시행하고 있으며, 이는 유해남조류세포수에 따라 발령이 된다. 이렇듯 유해남조류 측정은 매우 중요하며, 현재 조류의 분석방법은 현장샘플을 하여 조류검경을 통해 녹조류, 남조류, 규조류 중 유해남조류를 구분하여 세포수를 산정하기 때문에 시간이 많이 소요된다. 최근 원격탐사를 통해 남조류세포수의 대체 인자(지표)인 Phycocyanin을 통해 조류농도를 분석하고 있으나, 남조류세포수 분석에 대한 연구는 미비한 실정이다. 본 연구에서는 실제 하천에서 발생한 조류를 채취하여 조류검경을 통해 남조류세포수를 검경하였으며, 광학센서로 Phycocyanin농도, 초분광센서를 통해 조류스펙트럼을 취득하고, 이를 통해 남조류세포수 추정식을 산정하여 남조류세포수를 추정하였다.

온도 모니터링을 위한 광섬유 센서와 온도센서 배열 케이블의 비교 연구 (A Study on the Comparison between an Optical Fiber and a Thermal Sensor Cable for Temperature Monitoring)

  • 김중열;송윤호;김유성
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.15-24
    • /
    • 2007
  • 본 연구에서는 여러 지점의 온도를 동시에 측정할 수 있는 두 가지 온도 모니터링 기법을 소개하고 있다. 그 하나는 고유주소를 가지고 있는 온도센서로 구성된 온도센서 배열 케이블을 이용하는 기법이며, 다른 하나는 광섬유 센서를 이용하여 분포 온도를 측정하는 기법이다. 이 두 기법의 차이점은 다음과 같이 요약될 수 있다. 온도센서 배열 케이블은 온도센서가 위치하는 정확한 지점의 온도를 측정하게 된다. 그에 대한 온도 측정의 정밀도 및 분해능은 그 온도 센서의 성능에 따라 결정된다. 한편, 광섬유 센서는 레이저 펄스가 광섬유를 따라 보내질 때 생성되는 Raman 역산란파를 분석함으로써 온도를 측정하기 때문에 분포 개념의 온도를 측정하게 된다. 그에 대한 온도 분해능은 측정거리, 측정시간 및 온도측정 거리분해능에 따라 결정된다. 본 논문은 두 가지 온도 모니터링 시스템의 장단점을 비교함으로써 기술적이고 경제적인 측면에서 그의 응용분야를 면밀히 검토하는 데 그 목적이 있다. 이를 위해 두 기법을 이용한 다양한 실험을 실시하였다. 그 결과를 검토해 보면 온도센서 배열 케이블은 300m 범위 내의 지하수 흐름, 지열 분포 및 그라우팅 효과 검증에 적합할 것으로 판단되며 광섬유 센서는 상대적으로 긴 거리에 걸친 분포 온도에 대한 정보가 필요한 파이프 파인 감시, 터널 화재 감시 및 전력선 모니터링과 같은 분야에서 효율적으로 활용될 것이 기대된다.

투명 근적외선 흡수 염료 및 응용 분야 (Transparent Near-infrared Absorbing Dyes and Applications)

  • 정효철;정지은;이상호;김진철;박영일
    • 공업화학
    • /
    • 제34권3호
    • /
    • pp.207-212
    • /
    • 2023
  • 근적외선 흡수 염료는 전통적으로 정보 기록 및 정보 표시 분야에 사용되었을 뿐만 아니라 최근 광학 필터, 바이오, 에너지 저장 및 변환, 코팅 첨가제 등 다양한 응용 분야에 적용되고 있다. 핸드폰이나 디지털 카메라에 사용되는 이미지 센서는 근적외선 영역에서도 감도를 나타내기 때문에 보다 선명한 이미지를 구현하기 위해 근적외선 광학필터가 필수적이다. 에너지 저장 및 변환이 중요해짐에 따라 투명 태양 전지 분야에서는 근적외선 영역까지 흡수 영역을 확장할 수 있도록 다양한 근적외선 흡수 소재가 개발되고 있으며, 이를 이용해 소자 효율을 향상시키는 연구가 진행되고 있다. 미래 모빌리티 기술로 많은 관심을 받고 있는 자기치유 코팅 시스템에 광-열 효과를 갖는 근적외선 흡수 염료가 도입되어 보다 효율적인 자기치유 성능을 구현하는 연구들도 보고되고 있다. 본 총설에서는 대표적인 근적외선 흡수 염료들의 화학 구조들을 소개하고, 근적외선 흡수 염료들을 기반으로 한 최신 응용 연구 동향에 대해 다뤄보고자 한다.

열화학기상증착법을 이용한 CsPbBr3 박막 성장 및 특성 연구 (A Growth and Characterization of CsPbBr3 Thin Film Grown by Thermal Chemical Vapor Deposition)

  • 김가은;김민진;류혜수;이상현
    • 마이크로전자및패키징학회지
    • /
    • 제30권2호
    • /
    • pp.71-75
    • /
    • 2023
  • 본 연구에서는 열화학기상증착법을 이용한 세슘계 무기 페로브스카이트의 성장기판에 따른 결정 구조의 변화 및 광학적 특성을 비교 분석하였다. 무기 페로브스카이트 결정은 CsBr과 PbBr2를 전구체로 사용하여 SiO2/Si와 c-Al2O3 기판 위에 동일한 조건으로 CsPbBr3를 성장하였다. 비정질 구조를 가진 SiO2 표면에서는 Cs4PbBr6-CsPbBr3 혼합상의 결정 입자가 성장하였으며, 단결정 구조인 c-Al2O3 기판에서는 CsPbBr3 (100) 결정 면방향이 우세한 단일상의 박막이 형성되었다. 광학적 분석 결과 CsPbBr3는 약 91 meV의 반치폭을 갖고 약 534 nm 중심의 발광특성을 보였으며, Cs4PbBr6-CsPbBr3 혼합구조에서는 청색 변이에 의해 523 nm의 발광 및 6.88 ns의 빠른 광 소결시간을 확인하였다. 열화학기상증착법을 이용한 페로브스카이트의 결정구조의 제어 및 광특성의 변화는 디스플레이, 태양 전지, 광센서 등 다양한 광전 소자에 적용할 수 있을 것으로 기대된다.

광섬유 FBG 센서기반 성형 모니터링을 통한 철도 차량용 복합재 내장재 패널의 성형 품질 평가 (Molding Quality Evaluation on Composite Laminate Panel for Railway Vehicle through Cure Monitoring using FBG Sensors)

  • 박주엽;강동훈
    • Composites Research
    • /
    • 제36권3호
    • /
    • pp.186-192
    • /
    • 2023
  • 최근, 철도차량 분야에서는 경량화 및 운송 효율화를 위해 복합재 활용에 대한 관심이 높아지고 있다. 이에 따라 다양한 차량 부품에 복합재를 적용하고자 하는 연구 및 상용화 개발이 활발히 이루어지고 있으며, 복합재 적용에 대한 품질 검증을 위해 완성품의 기계적 성능 평가와 같은 사후 측정을 중심으로 평가가 이루어지고 있다. 하지만, 제작 품질에 큰 영향을 미치는 요소인 복합재 성형 과정에서 발생하는 열과 응력에 대한 분석은 미비한 상황이다. 따라서, 본 연구에서는 철도차량용 복합재 부품의 성형 품질을 검증하기 위하여 가장 활발히 사용되는 복합재 내장재 패널 2종(라미네이트 패널, 샌드위치 패널)에 대한 성형 품질 분석을 진행하였다. 이를 위해 복합재 내부 적용에 용이한 FBG 광섬유 센서를 이용하여 성형 과정 동안 온도 및 변형률 변화를 모니터링 하고, 성형 완료 후 발생하는 잔류 변형률 값을 측정하였다. 결과적으로, 과열 현상과 과도 잔류응력이 발생하지 않은 것을 확인함으로써 철도차량용 복합재 내장재 패널의 우수한 성형 품질을 검증하였다.

고분해능 및 고민감도를 위한 준 블록 섬광체를 사용한 네 층의 반응 깊이 측정 검출기 설계 (Design a Four Layer Depth-Encoding Detector Using Quasi-Block Scintillator for High Resolution and Sensitivity)

  • 이승재;조병두
    • 한국방사선학회논문지
    • /
    • 제18권2호
    • /
    • pp.65-71
    • /
    • 2024
  • 소동물용 양전자방출단층촬영기기(positron emission tomography, PET)의 고분해능과 고민감도를 달성하기 위해 매우 가늘고 긴 섬광 픽셀을 사용하여 검출기를 구성한다. 이러한 섬광 픽셀의 구조로 인해 시스템의 관심 시야 외곽에서 공간분해능 저하 현상이 발생한다. 이를 해결하기 위해 반응 깊이를 측정하여 공간분해능을 향상시키고, 준블록 섬광체를 사용하여 민감도를 향상시킬 수 있는 검출기를 설계하였다. 12.6 mm x 12.6 mm x 3 mm 크기의 준블록 섬광체를 네 층으로 배열하고, 모든 옆면에 광센서를 배치하여 감마선과 섬광체가 상호작용하여 발생된 빛을 수집하도록 설계하였다. 설계한 검출기의 성능 평가를 위해 DETECT2000 시뮬레이션을 수행하였다. 각 층별 섬광체 내에서 1.3 mm부터 11.3 mm까지 1 mm 간격으로 감마선 이벤트를 발생시켜 평면 영상을 획득하였다. 11 x 11 배열의 평면 영상에서 각 위치별 공간분해능과 피크 간 거리를 측정하였다. 측정된 공간분해능의 평균은 0.25 mm였으며, 피크 간 거리의 평균은 1.0 mm였다. 이를 통해 모든 위치가 서로 분리됨을 확인할 수 있었다. 또한 모든 층은 빛의 신호가 서로 분리되어 측정되므로 감마선과 상호작용한 섬광체의 층을 완벽히 분리해낼 수 있었다. 설계한 검출기를 소동물용 PET 시스템의 검출기로 사용할 경우, 우수한 공간분해능과 민감도를 달성하여 영상의 질을 향상시킬 수 있을 것으로 판단된다.

스마트 페인트 센서용 0.77(Bi1/2Na1/2)TiO3-0.23SrTiO3 (BNST23)/PVDF-TrFE 복합소재 제조 및 전기적 특성에 관한 연구 (Electrical Properties of 0.77(Bi1/2Na1/2)TiO3-0.23SrTiO3 (BNST23)/PVDF-TrFE Composites)

  • 형성재;강은서;강유빈;김채령;안창원;김병우;이재신;한형수
    • 한국전기전자재료학회논문지
    • /
    • 제37권4호
    • /
    • pp.433-438
    • /
    • 2024
  • Piezoelectric ceramics play an important role in various electronic applications. However, traditional ceramics are difficult to be used in some complicated structures, due to their low flexibility and high brittleness. To solve this problem, this study prepared and investigated ceramic/polymer composites that can utilize a good flexibility of polymers. Polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) and 0.77(Bi1/2Na1/2)TiO3-0.23SrTiO3 (BNST23) ceramics were selected to fabricate the composites. Ceramic/polymer composites were prepared using various volume fractions of BNST23 ceramics. The distribution of piezoceramic particles in BNST23/PVDF-TrFE composites was investigated using optical microscopy (OM) and scanning electron microscopy (SEM). The dielectric and piezoelectric properties of the composites were significantly influenced by the volume fraction of the piezoelectric ceramics. As a result, the highest piezoelectric constant (d33) of 56 pC/N was obtained in a composites with 70% volume fraction of BNST23 ceramics. Accordingly, it is expected that BNST23/PVDF-TrFE composites can be applied to various sensor applications.

100 MeV 양성자가속기를 활용한 SRAM SEE(Static Random Access Memory Single Event Effect) 시험 연구 (A Study of Static Random Access Memory Single Event Effect (SRAM SEE) Test using 100 MeV Proton Accelerator )

  • 한우제;최은혜;김경희;정성근
    • 우주기술과 응용
    • /
    • 제3권4호
    • /
    • pp.333-341
    • /
    • 2023
  • 본 연구는 국내 100 MeV 양성자가속기와 우주부품시험센터 우주전문시험시설기반을 활용하여 우주부품의 우주 방사선환경 시험검증 기술을 개발하고자 한다. 우주개발의 진전에 따라 고도화된 위성의 임무는 위성의 핵심부품인 메모리 등에 고집적 회로를 필수적으로 사용하고, 태양전지, 광학센서 및 opto-electronics 등 부수 장치에 반도체 소자의 활용이 증가하고 있다. 특히, 전자부품을 우주에 적용하기 위해서는 우주환경 시험을 반드시 거쳐야 하며, 그 중 가장 중요한 것이 고 에너지 방사선환경에서의 우주부품시험이다. 따라서 이에 필요한 우주 방사선 환경 구현 시설을 갖추어 체계적인 시험절차를 수립할 필요가 있다. 한국산업기술시험원 우주부품시험센터는 메모리 부품에 대한 방사선 시험 장치를 제작하고 이를 이용한 메모리 방사선 영향 평가 시험을 수행하였다. 경주양성자가속기에서 100 MeV 양성자를 활용하여 한국에서 활용가능한 수준의 방사선 시험을 진행하였다. 이러한 시험을 통해 메모리 반도체에서 나타나는 single event upset을 관찰할 수 있었다. 향후 해당 시험을 체계화하여 우주산업화에 기반을 마련하고자 한다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF