• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.809-814
• /
• 2007

In this paper, we proposed new method of a bidirectional WDM-PON transmission using suppressed optical carreir(SOC) and reflective semi-conductor optical amplifier(RSOA) based on WDM-PON. while LiNbO3 mach zehnder modulator(LN-MZM) generates 5GHz modulated SOC for uplink at central office(CO), RSOA at CO modulates the downstream data. At optical network units(ONUs), Another RSOA modulates the SOC light source for uplink at ONU and uplink data are up-converted to the 5 GHz already modulated SOC using LN-MZM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.335-346
• /
• 1987

The principal reason for the backscattering in an optical fiber is the Rayleigh scattering which is caused by non-uniform density of structure material of an optical fiber and diameter variations of the optical fiber-core along an optical fiber axis. The backscattering signal which is detected by the optical time domain reflectometer system(O.T.D.R) conatains information about both tha actual decay of power and the diameter variation along the optical fiber. In this paper, the O.T.D.R. system with 2x2 fiber directional coupler, timing control unit and gated integrator is used to measure diameter variations of an optical fiber.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1484-1493
• /
• 1992

In this paper, we propose the polarization coding of optical logic gates using filters and LCTV's, and represent the real-time system of an optical parallel adder to improve a carry propagation delay time. We fabricated a polarization filter for the polarization coding of a cell and an electrical system instead of an optical flip-flop which was necessary to an optical parallel adder. We used an optical fiber to play a part of decoding mask and interconnections in an optical parallel adder. The experimental results show that the polarization coding of a cell can represent 16 optical logic functions and that the implemented optical parallel adder can operate in real-time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1279-1284
• /
• 2004

In this paper, we propose a novel and simple optical technique for the detection of subcarrier-multiplexed(SCM) labels using optical interleavers. Optical-baseband packet signals with suppressed subcarriers appear at the through-pass port of the optical interleaver and SCM labels with suppressed optical carrier exit from the optical SCM extraction port. Since it does not require optical circulators, this structure shows less insertion loss than the previously proposed optical label detectors. The periodic nature of the interleaver transfer function makes it possible to detect multiple SCM channels simultaneously from an incoming wavelength-multiplexed signal stream. Detection of a 155-Mb/s ASK modulated 9.79-GHz subcarrier using a 10-GHz SCM optical label detector has been performed successfully and verified through optical spectra and bi t-error-rate measurements.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1982.10a
• /
• pp.67-70
• /
• 1982

In this paper, the intrinsic birefringence and Faraday rotation of the single mode optical fiber have been investigated. On the analysis, the optical fiber has been modeled as a linear retarder and the intrinsic linear retardation of the fiber is approximatly found to be 2.57 deg/m from the measurement. Faraday ratation was analyzed as perturbation theory and Jones matrix.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.89-91
• /
• 2016

This paper proposes the method of applying higher modulation in order to improve data rate of the system combining SM with SIM in Optical wireless communication.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.98-102
• /
• 2001

Effects of laser polarization were studied on behaviors of fast electrons produced from an aluminum target irradiated by a solid target irradiated by obliquely incident laser pulses at Bx10$\^$15/ W/cm$^2$. Jet emission of outgoing fast electrons collimated in the polarization direction was observed for the s-polarized laser irradiation, whereas for the p-polarized irradiation, very directional emission of outgoing fast electrons was found close to the normal direction of the target. The behaviors of in-going fast electrons into the target for s- and p-polarized irradiation were also investigated by observing x-ray Bremsstrahlung radiation at the backside of the target.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.6-11
• /
• 2001

More than ten kinds of oxide thin films and their heterostructure have been successfully fabricated on SrTiO$_3$(001) substrates by laser molecular beam epitaxy (laser MBE). Measurements of atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM) and X-ray small-angle reflectivity reveal that the surfaces and interfaces are atom-level-smooth. The unit cell layers and the lattice structure are perfect. The electrical and optical properties of BaTiO$_3$-x thin films and BaTiO$_3$/SrTiO$_3$ (BTO/STO) superlattices were examined. The all-perovskite oxide P-N junctions have been successfully fabricated and the better I-V curves were observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3286-3292
• /
• 1996

An experimental results of optical requency locked loop with DFB semiconductor laser as VCO are presented. Using quadricorrelator as frequency difference detector and frequency off-set locking technique with 1GHz reference frequency, frequency locking range of 140MHz was achieved. This paper reports the design and realization details of the loop.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.25-27
• /
• 1984

Using LED sources, the system that performs optical logic function of the input data arrays will be presented. Sixteen possible functions of two binary data arrays, such as AND, OR, NOR and XOR are simply obtained in parallel by controlling LED switching mode. Experimental result and some examples of application will be given.