• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.84-89
• /
• 1996

The nucleation and growth of microporosities was observed during the course of annealing treatment of sputter-deposited AgInSbTe thin films. There was a close correlation between the density of microporosity and the sputtering gas pressure in annealed thin films. The void density for a given composition decreased with sputtering gas pressure. It was shown from the present study that the number of porosities decreased while the average porosity size increased as the annealing temperature and holding time increased. The mechanism of porosity formation in the sputter-deposited AgInSbTe thin flus containing Ar-impurity trapped from the Ar-plasma is discussed in the present article.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.115-116
• /
• 2009

In this study, near-infrared absorbing dyes, namely, new rigidified heptamethine cyanine dyes were synthesized and investigated their properties. The cyanine dyes have been synthesized by a condensation reaction between a quanternary salt containing as activated methyl group and an unsaturated bisaldehyde or its equivalent. We were investigated the synthesis of new rigidified heptamethine cyanine and related the compounds with near infrared absorption. The full spectroscopic characterization of all cyanine were described. Absorption properties in the near-infrared region may cause these dyes to the potential used in bio-probe, optical recording media materials.

• Electrical & Electronic Materials
• /
• v.1 no.1
• /
• pp.62-69
• /
• 1988

Te-thin films were highly proper material for optical recording media, but has the demerit of short archival life time due to the unstability to humidity. In order to restrain the degradation, Te$_{100-x}$Se$_{x}$ alloys adding Se stable for the humidity were fabricated. Primarily, to measure the degradation rate with varing the composition of Se to x=5, 10, 14, 25 at.% at Te$_{100-x}$ Se$_{x}$, the change of light transmittance was used in various temperature-humidity environments. As the results, it was showed that Se$_{86}$Te$_{14}$ thin was the most proper composition for the improvement of degradation restraint.int.int.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.633-639
• /
• 1995

Dropouts in magnetic media are a primary quality deficiency which is detrimental to magnetic signal quality and thus the major impediment to error-free recording, especially in high density digital recorders. The specific form of defects and causes found to be responsible for signal dropouts occurring in magnetic tape were studied. Dropout occurred when the RF signal falls to low level due to the various types of surface defects. However, the fall in the level of the RF signal in gravure roll coated tapes was most often caused by foreign particles adhering to the magnetic tape. It was also shown from the present study that scattered particles trapped under the tape surface or put on the top can lift it as it crosses the head, creating a spherical tent shaped defect and causing a temporary signal drop. Dropout producing substances were identified through optical and microchemical analyses. The results were correlated with measured electrical signal losses combined with analytical microscopy to clarify source identification of defects.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.184-189
• /
• 2001

The design of an ultra fast ellipsometer is suggested. It adopts the division-of-amplitude-photopolarimeter (DOAP) as the polarization state detector. It does not utilize any moving part such as the rotating polarizer(analyzer) or even any electronic modulation part like the piezo-electric phase modulator. Hence the time resolution of the present system is limited only by the response time of the photo-detector and electronic circuit as well as the analog-digital converter. The feasibility of the suggested ultra fast ellipsometer was tested and the response time with nano-second time resolution has been verified. Its future application to the investigation of kinetics including that of the phase-change optical recording media like GezSb2 Tes is discussed. ussed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.23-32
• /
• 2003

The spectroe-ellipsometric constant $\Delta$, Ψ and the ellipsometric growth curves at the wavelength of 632.8 nm are collected. These are critically examined to find out the optimum growth condition of phase change $Ge_2Sb_2Te_5(GST)$ thin films as an optical recording medium. GST films are prepared using DC magnetron sputtering technique, under the selected experimental conditions of Ar gas pressure (5 mTorr, 7 mTorr and 10 mTorr), DC power of sputtering gun (15 W, 30 W and 45 W), and substrate temperature (from room temperature to 18$0^{\circ}C$). Based on the three film model, the density distribution of deposited GST films are obtained versus Ar gas pressure and DC power by analyzing spectro-ellipsometric data. The calculated evolution curves at the wavelength of 632.8 nm, are fit into the in situ observed ones to get information about the evolution of density distribution during film growth. The density distribution showed different evolution curves depending on deposition conditions. The GST films fabricated at DC power of 30 W or 45 W, and at Ar gas pressure of 7 mTorr turned out to be the most homogeneous one out of those prepared at room temperature, even though the maximum density difference between the dense region and the dilute region of the GST film was still significant (~50%). Finally, in order to find the optimum growth condition of homogeneous GST thin films, the substrate temperature is varied while Ar gas pressure is fixed at 7 mTorr and DC power at 30 W and 45 W respectively. A monotonic decrease of void fraction except for a slight increase at 18$0^{\circ}C$ is observed as the substrate temperature increases. Decrease of void fraction indicates an increase of film density and hence an improvement of film homogeneity. The optimum condition of the most homogeneous GST film growth turned out to be 7 mTorr of Ar gas pressure, 15$0^{\circ}C$ of substrate temperature. and 45 W of DC power. The microscopic images obtained using scanning electron microscope, of the samples prepared at the optimum growth condition, confirmed this conclusion. It is believed that the fabrication of homogeneous GST films will be quite beneficial to provide a reliable optical recording medium compatible with repeated write/erase cycles.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.386-390
• /
• 1999

Erasable polarization holographic grating was recorded with two-wave mixing in PCN which was side-chain liquid crystalline polymalonic esters containing two symmetrical 4-cyanoazobenzene as photoresponsive groups. The diffraction efficiency of recorded grating was measured and the characteristics of recording, decay in a dark room and erasing by circularly polarized light were investigated. As the results, birefringence, $\Delta$n of PCN was measured $6.5{\times}10^{-2}$, which was 0~100 times higher than those of crystals such as Fe:$LiNbO_3$, Ce:$BaTiO_3$ crystals. Dark decay rates was $4.3{\times}10^{-5}$ %/hour, which showed the possibility of application as data storage media.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.162-162
• /
• 2000

We have studied magnetic properties of Co/Pt multilayered films which have attracted great interest as high-density magneto-optical (MO) recording media due to their good MO properties. For this study, [Pt(45 )/Co(35 )]$\times$8 films were deposited with a Pt buffer layer of 60 on Si(100) substrate by alternating electron-beam evaporation in a high vacuum and were ion beam mixed by using 80keV Ar+ at 25$0^{\circ}C$. Especially, an external magnetic field was added to help changing magnetic property during ion beam mixing (IBM). The intermixing of Co and Pt layers after IBM was confirmed with Rutherford Backscattering Spectroscopy (RBS) and Transmission Electron Microscopy (TEM). The MO property of the film was measured with magneto-optical Kerr spectrometer and the change of magnetic easy axis in the film plane was observed from Ker loop data. This anomalous result might be correlated with the change of atomic structure due to the intermixing effect.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.43-49
• /
• 2006

Fractal/angle multiplexing is a $LiNBO_3$ crystal using a X-Y Galvano mirror, and the random access concept in fractal/angle multiplexing are discussed in this paper. First, the brief introduction of the designed holographic digital data storage system is presented. Then, the average access time concept for the storage system is newly defined, and the comparison of the average access time between the holographic storage and a conventional optical disk is performed. Second, the basic simulation and experiment to find the X-Y Galvano mirror dynamics are conducted. From this analysis, we find that the average access time in our HDDS which has 6 degree scan angle is about 5 msec. This result is very high performance when it compared with the average access time of a conventional optical disk. Finally, some recording results using fractal/angle multiplexing are presented, then, the relationship between bit error rate and angle mismatch for the each multiplexing are discussed.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.189-201
• /
• 2021

The art of dynamic images has experienced three development stages, including experimental films, recording art, and new media image. By introducing all kinds of new materials, new media to the art, and the art of dynamic images has created more freedom for art creation. With the development of digital information technology, dynamic image works have put forward an increasingly high requirement of visual art. The combination of dynamic images and visual illusion can give rise to different forms and expression methods, thus endowing artworks with more vigor. This paper provides an overview by sorting out the lineage and development of dynamic images in the background, as well as understanding the application and performance of contrasted visual illusion. Based on the understanding of the characteristics of visual illusion, we discuss the new characteristics of applying the theory of visual illusion to new media dynamic images in relation to the technical approach of dynamic images. Through the analysis of specific works of Telematic Vision, we search for its reasonable combination and find the appropriate technical means of implementation. We discuss how to use digital multimedia technology and spatial optical illusion to make the design more novel and impactful, and consider how the combination of digital dynamic image technology and visual illusion should be interpreted and applied.