• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.334-341
• /
• 1995

IB-AI-VIB2 및 IB-AI-VIB2 :Co2+ 결정을 고순도 원소를 출발 물질로 하고 iodine을 수송 매체로 사용하여 chemical transport reaction method로 성장시켰다. 성장된 결정의 결정구조는 chalcopyrite 구조였으며, energy gap은 direct band gap으로 3.514~1.814 eV 정도로 주어졌으며, cobalt를 불순물로 첨가할 때 energy gap은 감소하였다. IB-AI-VIB2 :Co2+ 결정에서 첨가된 cobalt가 모체결정의 Td symmetry site에 Co2+ ion으로 위치하여, Co2+ ion의 energy 준위 사이의 전자전이에 기인하는 불순물 광흡수 peaks가 나타났다. 이 불순물 광흡수 peaks에 결정장 이론을 적용하여 구산 1st-order spin-orbit coupling parameter(λ)는 -183~ -189cm-1정도였고, 2nd-order spin-orbit coupling parameter(P)는 225~239 cm-1정도였으며, crystal field parameter(Dq)는 328~395cm-1, Racah parameter(B)는 531~552cm-1정도였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.923-929
• /
• 2023

This study investigated the optical characterization of water types based on Jerlov's classification, employing the CIE colorimetric system. Digital visualization techniques were applied to articulate watercolor manifestations intuitively. The L^* luminance parameter exhibited a discernible reduction from optical water type I III and from type 1 to 9, registering a range between 66 and 84. Analysis of color attributes in each optical water type revealed that in the transition from type I to III, the color a^* values spanned from -7.43 to -8.32, while color b^* values ranged from -2.97 to -3.33. a^* values for optical water types 1 to 9 varied between -6.28 and -10.50, with corresponding b^* values ranging from -2.51 to -4.20. Consequently, optical water type I, IA, IB, II, and III were discretely categorized by independent color values, as were optical water types 1, 3, 5, 7, and 9. The digitized representation of watercolor in this inquiry facilitated comprehensive information asso,o;atopm. The study highlights limitations in Jerlov's classification for representing watercolors in different ocean conditions. It emphasized the need to collect color data from various marine areas and formulate a novel color standard or method for comparing colors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.275-276
• /
• 2011

We have investigated the holographic grating formation on Ag-doped amorphous chalcogenide As2Se3 thin films with Ag layer. The basic optical parameter which is a refractive index and extinction coefficent was taken by n&k analyzer. The source of laser was selected based on these parameter. Holographic gratings have been formed using He-Ne laser (wavelength: 632.8 nm) Diode Pumped Solid State laser (DPSS, wavelength: 532.0 nm) under [P:P] polarized the intensity polarization holography. The diffraction efficiency was obtained by +1st order intensity.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.11
• /
• pp.976-980
• /
• 1994

The sensitivity factors and the error propagation factors are defined for the three-parameter ellipsometry (TPE). The sensitivity factor is useful for understanding the nature of the TPE measurements in connection with determination of the optical properties and the thickness of a film. On the other hand, the error propagation factors provide a quantitative tool for predicting the optimum condition for TPE experiments. Their usefulness is demonstrated for the passive film formed on nickel in aqueous solution.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.477-483
• /
• 1991

In the three-parameter ellipsometry (TPE), also known as reflectance-ellipsometry, the ellipsometric measurements, ${\Psi} and {\Delta}$, are combined with the reflectometric measurement, R, to determine the optical parameters and the thickness of a light-absorbing thin film. The constant ${\Psi}, {\Delta}$ and R surfaces are analyzed graphically to understand the nature of the TPE solutions. A sensitivityanalysis is shown to be useful not only for identifying the film properties which affect most the TPE measurements, but also for estimating errors in film properties arising from the uncertainties in measurements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.36-39
• /
• 1997

In this paper, we described an approach to design of precision optical system for visual inspection of solder joint defects of SMC(surface mount components) on PCBs(Printed Circuit Board). The illumination system, consisting of three tiered LED lamps and one main camera and four side view camera, is implemented to generated iso-contour on the solder joint according to gradient of the soldered surface. We analyze LED design parameter such as incident angle, diameter of LED ring, and so on to acquire uniform illumination.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.185-189
• /
• 1990

고강도 레이저 장에서 마그네슘 원자의 다광자 이온화에 미치는 레이저 parameter의 영향을 Time-of-Flight spectrometer를 사용하여 분광학적 방법으로 연구하였다. 진공 챔버 속에서 파장 532nm와 1064nm인 레이저 펄스를 강도 1010-13W/'$ extrm{cm}^2$ 범위내에서 변화시키며 마그네슘 원자와 반응시켜서 Mg+ 및 Mg2+ 이온을 생성시켰으며 레이저의 파장, 강도 및 편광에 따른 광전자 스펙트럼을 구하였다. 또한, 전자 두 개를 방출하고 생성된 Mg2+ 이온의 발생 기구에 대하여 논하였다.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.151-153
• /
• 2005

Indium tin oxide (ITO) thin film was polished by chemical mechanical polishing (CMP) by the change of process parameters for the improvement of electrical and optical properties of ITO thin film. Light transparent efficiency of ITO thin film was improved after CMP process at the optimized process parameters compared to that before CMP process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.354-355
• /
• 2005

Indium tin oxide (ITO) thin film was polished by chemical mechanical polishing (CMP) by the change of process parameters for the improvement of electrical and optical properties of ITO thin film. Light transparent efficiency of ITO thin film was improved after CMP process at the optimized process parameters compared to that before CMP process.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2707-2709
• /
• 2002

In this paper, we suggest new optical eye-diagnosis medical equipment. First, we simulate light propagation in bio-tissue using MC method. Second, we propose the OCT design parameter using Michelson interferometer.