• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.58-58
• /
• 2003

Silver doped ZnO (SZO) films were prepared by rf magnetron sputtering on glass substrates with extraordinary designed ZnO target. With the doping source for target, use AgNO$_3$ powder on a various rate (0, 2, and 4 wt.%). We investigated dependence of coating parameter such as dopant content in target and substrate temperature in the SZO films. The SZO films have a preferred orientation in the (002) direction. As amounts of the Ag dopant in the target were increased, the crystallinity and the transmittance and optical band gap were decreased. And the substrate temperature were increased, the crystallinity and the transmittance were increased. But the crystallinity and the transmittance of SZO films were retrograde at 200$^{\circ}C$. Upside facts were related with composition. In addition, the Oxygen K-edge features of the SZO films were investigated by using near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Changes of optical band gap of the SZO films were explained compared with XRD, XPS and NEXAFS spectra.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.459-462
• /
• 2006

The diffuse attenuation coefficient for down-welling irradiance ($K_d$) is an important parameter for ocean studies including remote sensing applications. For the vast ocean, ocean color remote sensing is the only possible means to get the fine-scale measurements of $K_d$. To develop a technique of estimating $K_d$ from remotely sensed data, the following underwater optical parameters (absorption coefficient (a), attenuation coefficient (c), scattering coefficient (b), diffuse attenuation coefficient ($K_d$), etc.) have been studied. For this research we conducted the field campaign around the Yellow Sea at $8{\sim}9$ June, 2006. We obtained a set of underwater optical parameter data: down-welling irradiance ($E_d$), up-welling irradiance ($E_u$) and up-welling radiance ($L_u$) using TriOS optical sensors and a, c coefficient using Spectral Absorption and Attenuation Meter (AC-S). We then derived $K_d$ values from $E_d$ for each depth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.543-552
• /
• 2003

The effects of a directionally emitting and reflecting dielectric surface on the wall heat flux and medium temperature distribution are studied. The system is an infinite square duct enclosing an absorbing and emitting medium. The emissivity and reflectivity of opaque and gray wall vary with direction. Combined effect of conductive and radiative heat transfer is analyzed using finite difference and the direct discrete-ordinates method. The parameters under study are conduction to radiation parameter, optical depth, refractive index ratio. The results with directional and diffuse properties deviate each other when the conduction to radiation parameter is less than around 0.01. The wall heat flux differs fur optical thickness less than around 0.1. However, the medium temperature profiles differ for optical thickness greater than around 1. Deviations from diffuse property calculations are larger for hot wall with directional property than cold wall with directional property. As n increases from 1.5, the trend changes are observed fur refractive index ratio about n=6.10

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1451-1458
• /
• 2001

The effects of a specularly reflecting surface on the wall heat flux and medium temperature distribution are studied. The system is an infinite square duct enclosing an absorbing and emitting medium. The walls are opaque, and black or gray. The walls emit diffusely but reflect diffusely or speculary. Heat is transferred by the combined effect of conduction and radiation. The radiative heat transfer is analyzed using direct discrete-ordinates method. The parameters under study are conduction, to radiation parameter, optical depth, wall emissivity, and reflection characteristics. The specular reflection and diffuse reflection show sizeable differences when the conduction to radiation parameter is less than around 0.01. The differences appear only either on the side wall heat flux or on the medium temperature profiles for the range of this study. The differences on the side wall heat flux are observed for optical thickness less than around 0.1 However the differences on the medium temperate profiles are found for optical thickness greater than around 1. The difference increase with increasing reflectance. The specular reflection increases the well heat flux gradient along the side wall.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.48-53
• /
• 2008

We propose an optical configuration to compensate dispersion characteristics in the dark state of normally black twisted nematic (NB-TN) liquid crystal display (LCD). We employed a half-wave plate (HWP) and a +A plate to achieve the superior dark state. By using the parameter space diagram (PSD) method, we could obtain the optimum values of parameters and the high contrast-ratio over 500 : 1 could be obtained. Furthermore, excellent dispersion characteristics were also obtained in the bright state. We could confirm the performance of the proposed structure using both the numerical calculations and the experiments.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.464-473
• /
• 1993

The dynamics of phase grating formation with visible light in an optical fiber is investigated. Adopting a simple two-photon local bleaching model, it is shown that the grating self-organize into an ideal grating, where the writing frequency is always in the center of the local band gap, as it evolves. The evolution at each point in the fiber is described in terms of a universal parameter that reduces the coupled partial differential equations describing the system to ordinary differential equatior~s. These equations are used to prove that there exists a fixed point of the grating growth process that corresponds to a perfectly phase-mached grating.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.17-22
• /
• 2007

In this paper, the optimal value of optical phase conjugator (OPC) position and the optimal values of dispersion coefficients of fiber sections for the best compensation of the distorted WDM signals with frequency chirp of -1 are induced to alternate with the symmetrical distributions of power and local dispersion with respect to OPC, which is difficult to form in real optical link due to fiber attenuation in mid-span spectral inversion (MSSI) technique. It is confirmed that the Q-factors of total channels of -18.5 dBm launching light power exceed 16.9 dB, which value corresponds to 10-12 BER, by applying the induced optimal parameter values into 16 channels ${\times}$ 40 Gbps WDM system, on the other hand the Q-factors of only 9 channels exceed that value in WDM system with the conventional MSSI technique. Thus, it is expected to expand the availability of OPC in WDM system through the using of the optimal parameter values that are induced by the proposed method in this paper, without the symmetrical distributions of power and local dispersion.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.421-422
• /
• 2020

발 고유 변인 측정 및 데이터의 수집은 소비자의 발 건강을 위한 신발 제작을 위하여 필요하다. 신발의 설계 지표 또한 개정의 필요성이 제시되고 있어 발 고유 변인 측정의 및 데이터 획득에 관한 연구의 필요성이 증대되고 있다. 본 논문에서는 발 형태의 데이터 값을 산출하여 사용자에게 적합한 맞춤형 인솔 및 신발을 제작하고, 신발의 설계 지표를 산출하기 위하여 발 고유 변인의 데이터 값을 자동으로 측정이 가능한 발 고유 변인 산출이 가능한 발 형상 추출 시스템에 대해 서술한다. 이를 위해 사용자의 발 고유 변인 측정을위한 스캐닝 스테이지를 설계 및 제작하고, 3대의 깊이 카메라를 설치하였다. 잡음 및 배경을 제거하기 위해 가우시안 배경 모델링으로 전경 영역을 분리하여 발 점군 데이터를 획득 한 후, Euclidean transformation을 통해 각 점군 데이터를 정합한다. 실험 결과에서는 획득된 발 형상 점군 데이터와 접지면 형상 및 발 변인 추출 결과를 보여준다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.