• 한국통신학회논문지
• /
• 제41권1호
• /
• pp.89-91
• /
• 2016

본 논문은 광 무선통신에서 Subcarrier Intensity Modulation(SIM)에 Spatial Modulation(SM)을 결합한 시스템의 전송률을 향상시키기 위해 고차 변조방식을 적용하는 방법을 제안한다.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1086-1093
• /
• 2013

In this paper, we propose a novel modulation that combines the spatial modulation (SM) with the subcarrier intensity-modulation (SIM) for optical wireless communications. The performance of SIM-SM scheme is compared to a conventional SIM by computer simulation. For the spectral efficiency (SE) of 2bits/s/Hz, the performance gain about 2dB is achieved. As the SE increases to 3bit or 4bits/s/Hz, the Eb/N0 gain becomes about 5dB. It is shown the attenuation for the SIM is more serious than the SIM-SM according to increasing the number of the subcarriers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.693-698
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics f3r intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1270-1277
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics for intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• ETRI Journal
• /
• 제40권6호
• /
• pp.794-801
• /
• 2018

This paper proposes a novel graphene-based optical microelectromechanical systems MEMS accelerometer that is dependent on the intensity modulation and optical properties of graphene. The designed sensing system includes a multilayer graphene finger, a laser diode (LD) light source, a photodiode, and integrated optical waveguides. The proposed accelerometer provides several advantages, such as negligible cross-axis sensitivity, appropriate linearity behavior in the operation range, a relatively broad measurement range, and a significantly wider bandwidth when compared with other important contributions in the literature. Furthermore, the functional characteristics of the proposed device are designed analytically, and are then confirmed using numerical methods. Based on the simulation results, the functional characteristics are as follows: a mechanical sensitivity of 1,019 nm/g, an optical sensitivity of 145.7 %/g, a resonance frequency of 15,553 Hz, a bandwidth of 7 kHz, and a measurement range of ${\pm}10g$. Owing to the obtained functional characteristics, the proposed device is suitable for several applications in which high sensitivity and wide bandwidth are required simultaneously.

• 한국광학회지
• /
• 제17권6호
• /
• pp.500-506
• /
• 2006

본 논문은 광강도 변조방식 광섬유 변위센서의 측정 메커니즘을 수식적으로 모델링하여 측정영역과 감도를 원하는 목적에 따라 유연하게 조정할 수 있는 설계모델을 제안하고 있다. 유도된 모델은 스텝 인덱스 광섬유를 적용한 경우로 제한되고 광섬유 센서의 변위 응답영역 중 front slope 측정영역 해석에 초점을 맞추었다. 또한 광섬유 설계 시 유도된 모델 적용이 용이하도록 수치적분 방식의 해석 프로세스를 소개하고 있다. 제안된 모델과 프로세스는 기본 설계변수 별로 실험결과를 통해 비교검증 되었다. 끝으로 검증된 모델을 통해 기본 설계변수에 따른 광섬유 변위센서의 변위응답 특성 경향을 분석하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.178-179
• /
• 2002

We generate optical millimeter-waves by double-sideband suppressed carrier (DSB-SC) modulation using a Mach-Zehnder (MZ) modulator biased at the minimum power. The DSB-SC modulation allows the high-frequency intensity modulation for millimeter-wave generation at the twice of the MZ modulator driving frequency.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.520-528
• /
• 2013

A 20 mm diameter of small 5-D.O.F. force sensor has been developed for applications in MR-field Optical intensity modulation was adopted for transducing to miniaturize the sensor structure. For its accurate sensing of 5-D.O.F. force/moment, the elastic detecting module was designed to respond independently to each force or moment component. And for small size, two optical transducing modules of 2-D.O.F. and 3-D.O.F. were designed and integrated with the detecting module where optical fibers were arranged in parallel to make the sensor small. It is confirmed by calibration test that the detecting modules deforms linearly and independently to the input force. The results of evaluating test show that the range and resolution of forces are ${\pm}4$ N and 0.94~7.1 mN and the range and resolution of moments are ${\pm}120N{\cdot}mm$ and $0.023{\sim}0.034N{\cdot}mm$.

• 대한전자공학회논문지TC
• /
• 제46권7호
• /
• pp.13-23
• /
• 2009

본 논문에서는 계층간 교차 (Cross-Layer) 개념을 적용하여 터보 (Turbo) 부호화된 광 (Optical) 부호분할 다중접속 (CDMA : Code Division Multiple Access) 시스템의 네트워크 성능을 분석하고 실험하였다. 계층간 교차 개념은 물리 (Physical) 계층과 매체접근제어 (MAC : Medium Access Control) 계층을 고려하였다. 시스템은 펄스위치변조 (PPM : Pulse Position Modulation)를 적용한 강도변조/직접검파 (IM/DD : Intensity Modulation/Direct Detection) 방식의 광 시스템을 고려하였다. 그리고 시스템의 성능을 향상시키기 위해 병렬 연접된 길쌈부호 (PCCC : Parallel Concatenated Convolutional Code)로 이루어진 터보 부호를 사용하였다. 네트워크의 성능은 비트오류확률 (BEP : Bit Error Probabiliy) 측면에서 분석되었다. 모의실험 결과, 터보 부호는 적당한 부호화 및 복호화 복잡도에서 상당한 부호화 이득을 제공하는 것을 확인할 수 있었다. 또한 일정한 부호화율 (Code Rate)에서 인터리버 길이와 복호과정에서의 반복 복호 횟수를 증가시킬수록 시스템 성능이 향상되는 것을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.174-175
• /
• 2002

We generate short optical pulses of ∼ 6 picoseconds at 10 GHz by chirped pulse compression based on phase modulation and chirp compensation. In the suggested method, sinusoidally driven intensity and phase modulators generate chirped pulses which are subsequently suppressed by chirp compensation using a single mode fiber.