• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.18-29
• /
• 1994

For the efficient recognition of Korean Alphabets, we proposed the tree structure algorithm which was based on K-tuple NRF-SDF using representative images as training images. Representative images consisted of ECP-SDF images of several consonants or vowels. To reduce the effect of sidelobe in the output correlation plane, we used the representative images as training images and obtained the elements of a vector inner product matrix using the peak value of AMPOF correlation of training images with one another. The proposed algorithm consisted of three main-step containing several substeps. In filter synthesis of each step, representative images were used as training images in the first and the second main-step and each consonant or vowel was used as training images in the third main-step. The performance of this algorithm is demonstrated by computer simulation and optical experiment.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.247-250
• /
• 2008

The paper presents the advanced radiometric calibration method, called the lRCM (Iterative Radiometric Calibration Method), in order to avoid an operational constraint (solar source) for calibration. The IRCM assumes that an optical instrument is equipped with a filter assembly which consists of same band filters with different transmission ratios. Given all the noise sources (including the artificial one caused by the filters) of an image sensor, the noncentral ${\chi}^2$ distribution of the output result is induced by the approach of a noise PDF (Power Density Function). Finally, the radiometric calibration problem is transformed into equating two independent relations for the image sensor gains through the specified distribution.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.33-35
• /
• 2003

The electrooptic properties of the reflected light in a reflective mode, $45^{\circ}C$twisted nematic liquid crystal (TNLC) cell were investigated in the voltage regions near and away from the Freedericksz transition threshold. The measured reflectivity away from the threshold voltage ($V_th$) could not be described by the model which assurnes a constant tilt angle as well as a linearized distribution of twist angle across the cell, although the data are well fitted near $V_th$. We found that in the voltage region away from $V_th$, the model considering the distributions of the tilt angle and the twist angle should be applied for the calculation of the reflectivity. The director-axis distributions were obtained from the numerical integration of the Euler-Lagrange equation.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.117-120
• /
• 2000

Pulse oximetry is a well established non-invasive optical technique for monitoring the SpO$_2$ during anaesthesia, recovery and intensive care. Pulse oximeters determine the oxygen saturation level of blood by measuring the light absorption of arterial blood. The sensors consists of red and infrared light sources and photodetectors. In the measurement of the hemoglobin oxygen saturation, conventional method has required the technique of filtering of remove the noise, and of complex signal processing algorithm. So much time have required to signal processing. In this research, we separate AC signal and DC signal in the stage of signal detection. We filter the noise from each signal and convert A/D. We obtain the SpO$_2$ using the DSP algorithm.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.131-135
• /
• 2003

WDM(Wavelength division multiplexing) light wave communication system requires MUX/DeMUX and optical filter OADM can be used to extract and add the specific wavelength channel from the transmission line. In this paper, we propose the OADM based on MZI and cascade FBG. It is able to minimize system and reduce sidelobe. So, we have considered MZI structure and 3dB coupler. Using the coupled mode theory. We also analyze out characteristics of OADM and experiment. From results obtained by experiment and computer. Simulation, the proposed OADM with cascade FBG works well. we hope that the obtained result in this paper con be used as the data to design the OADM with cascade FBG.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.656-658
• /
• 1997

AWG designed in this paper is considered with flat passband characteristics in the channel as a method for solving frequency stability problems of the sources in the conventional optical filters. This device can acquire the flat passband characteristics by inserting the multimode wave guides utilizing the self imaging effec between input wave guides and first star coupler. BPM simulation results show that the excess loss is smaller than 6.5 dB, the crosstalk is less than -22 dB and the 1 dB passband is about 50 GHz in the central channel.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.5-10
• /
• 1994

It is obtained the general expessions of the numerical method are applied for the TEM-mode analysis of multu-layer multi-coupled microstrip lines, In this paper, coupled microstrip are replaced by three-coupled microstrip lines in special aplications. Three-layer versions of three-coupled microstrip lines are specially attactive because of the additional flexibilities offered by three-layer configuration. This structure can be used for obtaining large capacitance and preventing coupling among microstrip lines in filter and coupler. Sappihre is chosen for anisotropic substrates material. The permittivity parallel to the optical axis is higher than the permittivity in the plane perpendicular to this axis.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.525-528
• /
• 2002

This study describes an implementation of object tracking algorithm on FPGA. The global system detect the zone there is more motion in, attending to the generated optical flow, and centers its attention to it to improve the details In this case, To obtain image in Camera, Image aquisition board make use of SAA7113 Video Input processor and algorithm is applied to motion estimation and difference picture. Also, This work can be applied kalman filter to reliability of tracking.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.111-118
• /
• 2003

Recently, environmental damage to urban area becomes serious problem due to the exhaust emissions by increasing the number of vehicle. Especially, exhaust emission from diesel vehicles are blown to be harmful to human health and environment. Photoacoustic Spectroscopy system is very useful technology for simultaneous and continuous measurement of the various components of the automotive exhaust gas. In this study, in order to reduce emission gases from automobile, we tried to develop the measurement system of Photoacoustic Spectroscopy. To improve performance of high sensitive Photoacoustic Spectroscopy system for automotive exhaust emissions, the shape of Photoacoustic Spectroscopy cell was optimized to use the flow analysis. And Exhaust emission data of the 1,500cc gasoline engine was fixed the working fluid. The characteristics of fluid flow for cell were analyzed by various conditions in detail.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.2
• /
• pp.95-100
• /
• 2016

This study proposes the temperature compensation algorithm using thermopile detector for non-dispersive infrared Nitrogen gas sensor. From the output voltage of thermistor that is attached onto the infrared detector, the ambient temperature was extracted. The effects of temperatures on the properties of sensor module characteristics of narrow bandpass filter, optical cavity and infrared lamp, and air mixing gas have been introduced in order to implement the temperature compensation algorithm.