• 제목/요약/키워드: optical current transducer

검색결과 10건 처리시간 0.026초

Fiber Fabry-Perot type Optical Current Transducer with Frequency Ramped Signal Processing Scheme

  • Park, Youn-Gil;Seo, Wan-Seok;Lee, Chung-E.;Taylor, Henry-F.
    • Journal of the Optical Society of Korea
    • /
    • 제2권2호
    • /
    • pp.74-79
    • /
    • 1998
  • The use of a fiber Fabry-Perot interferometer (FFPI) as an optical current transducer is demonstrated. A conventional inductive pickup coil converts the time-varying current I(t) being measured to a voltage waveform V(t) applied across a piezeolectric strip to which the FFPI is bonded. The strip experiences a longitudinal expansion and contraction, resulting in an optical phase shift ${\phi}(t)$ in the fiber proportional to V(t). This phase shift is measured using a frequency-modulated semiconductor light source, photodiodes to monitor the reflected light from the FFPI and the laser power, and a digital signal processor. Calibration routines compute V(t) and I(t) from the measured phase shift at a l KHz rate. Response to 60 Hz ac over the design range 0-1300A rms is characterized Transient response of the FFPI transducer is also measured.

GIS용 광CT의 전기적 특성 (Electrical Characteristics of Optical Current Transducer on Gas Insulated Switchgear)

  • 이수웅;이성갑;노현지;안병립;원우식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.319-320
    • /
    • 2007
  • We researched basic study about electrical characteristics of Zinc Selenide (Faraday Cell), which is known for various temperature of good-performance, that applied measuring current or protecting instrument by Optical Current Transducer, on Gas Insulated Switchgear. Measuring System consists of VCSEL produced 850nm IR Laser, Pin Photo Diode made of GaAs surveyed as Optical Power Meter, and Optical Fibers specified Multi-mode. We observed optical output changes during measurement of currents increasing by 100[A] in range from 0[A] to 1,000[A] and set temperature condition increasing by $5[^{\circ}C]$ in a range from $30[^{\circ}C]\;to\;60[^{\circ}C]$.

  • PDF

전력기기용 고안정성 광섬유 CT 센서의 광 신호처리기 설계 및 구현 (Design and Implementation of Optical Signal Processor in Fiber-Optic Current Transducer for Electric Equipments)

  • 장남영;최평석;은재정;정현성
    • 융합신호처리학회논문지
    • /
    • 제8권3호
    • /
    • pp.171-177
    • /
    • 2007
  • 본 논문에서는 PFOCS 형태의 전력기기용 고안정성 광섬유 CT 센서에 활용할 수 있는 광 신호처리기를 설계/구현하고 그 특성에 대하여 논의하였다. 본 논문에서 제작한 광 신호처리기는 PFOCS를 구성하는 광 부품에서 발생되는 광 손실이나 편광변화로 인한 출력 광의 강도 변화로 발생하는 측정 전류 오차를 줄이기 위해 사용된다. 또한, 광 신호처리기는 광전 변환부, 아날로그 신호처리부, 레벨 시프트 및 마이크로프로세서로 구성된 실시간 계측제어부를 일원화하여 소형/경량으로 제작되었다. 제작된 광 신호처리기의 특성 실험은, 전광섬유 소자로 구성된 PFOCS를 이용하여, 632.8nm 파장의 광원과 권선수가 약 1500인 솔레노이드에 전류를 인가해 $0{\sim}7,500A$의 범위에 대하여 수행하였다. 그 결과, 측정 전류의 선형성 오차는 1,000A에서 7,000A 범위에서 최대 1.7%미만, 평균 오차는 약 0.3% 미만으로 양호한 선형성을 보였다.

  • PDF

광 CT용 자성 가넷 막의 에피택시 육성 및 평가 (Epitaxial Growth and Evaluation of Magnetic Garnet Films for Optical Current Transducers)

  • 조재경
    • 한국자기학회지
    • /
    • 제17권6호
    • /
    • pp.246-252
    • /
    • 2007
  • 본 논문에서는 출발원료 배합비 및 육성 파라미터가 LPE(Liquid Phase Epitaxy)법으로 육성된 자성 가넷 막의 특성에 미치는 영향을 조사하며, 광 CT의 페러데이 회전자용으로서 적합한 막의 육성 조건을 제시한다. 막을 평가하기 위하여 조사한 특성은 막후, 표면 모폴로지, X선 회절, 격자상수, 막과 기판(단결정 비자성 가넷 웨이퍼)사이의 격자상수의 부정합, 페러데이 회전각 등이었다. 또한, 육성된 자성 가넷 막을 이용하여 광 CT를 제작하고, 성능을 평가했다.

광섬유 Mach-Zehnder 간섭계를 이용한 부분방전 초음파 검출특성 (Detecting Characteristics of Ultrasonics Generated by Partial Discharge in Insulating Oil Using the Optical Fiber Mach-Zehnder Interferometer)

  • 이상훈;심승환;이광식;김달우
    • 조명전기설비학회논문지
    • /
    • 제17권4호
    • /
    • pp.50-56
    • /
    • 2003
  • 본 논문에서는 유입변압기 진단을 목적으로 부분방전시 발생하는 여러 가지 물리적 화학적 현상중 초음파를 검출하기 위하여 광섬유 Mach-Zehnder 간섭계를 구성하였다. 구성된 광섬유 센서의 초음파 검출 평가 실험을 실시하고, 절연유 중에 배치한 침-평판전극에 교류 고전압을 인가하여 방전시 발생하는 초음파를 측정하고 퓨리에 변환 및 wavelet 변환을 이용한 데이터 분석 결과를 나타냈다.

웨어러블 생체신호 모니터링을 위한 스마트텍스타일센서의 분류 및 고찰 (The Classification and Investigation of Smart Textile Sensors for Wearable Vital Signs Monitoring)

  • 장은지;조길수
    • 한국의류산업학회지
    • /
    • 제21권6호
    • /
    • pp.697-707
    • /
    • 2019
  • This review paper deals with materials, classification, and a current article investigation on smart textile sensors for wearable vital signs monitoring (WVSM). Smart textile sensors can lose electrical conductivity during vital signs monitoring when applying them to clothing. Because they should have to endure severe conditions (bending, folding, and distortion) when wearing. Imparting electrical conductivity for application is a critical consideration when manufacturing smart textile sensors. Smart textile sensors fabricate by utilizing electro-conductive materials such as metals, allotrope of carbon, and intrinsically conductive polymers (ICPs). It classifies as performance level, fabric structure, intrinsic/extrinsic modification, and sensing mechanism. The classification of smart textile sensors by sensing mechanism includes pressure/force sensors, strain sensors, electrodes, optical sensors, biosensors, and temperature/humidity sensors. In the previous study, pressure/force sensors perform well despite the small capacitance changes of 1-2 pF. Strain sensors work reliably at 1 ㏀/cm or lower. Electrodes require an electrical resistance of less than 10 Ω/cm. Optical sensors using plastic optical fibers (POF) coupled with light sources need light in-coupling efficiency values that are over 40%. Biosensors can quantify by wicking rate and/or colorimetry as the reactivity between the bioreceptor and transducer. Temperature/humidity sensors require actuating triggers that show the flap opening of shape memory polymer or with a color-changing time of thermochromic pigment lower than 17 seconds.

Littman형 파장가변 다이오드 레이저 시스템의 설계.제작 및 성능평가 (A study on the construction and the performance evaluation of Littman type tunable diode laser system)

  • 조재헌;박준구;백운식
    • 한국광학회지
    • /
    • 제12권4호
    • /
    • pp.257-262
    • /
    • 2001
  • 상용 반도체 레이저 다이오드에 Littman형 외부공진기를 결합하여 파장기변 레이저 다이오드 시스템을 제작하였다. 0차 출력광은 단일종모드로 동작하여 CFP의 분해능인 9MHz이내의 선폭을 예상할 수 있었으며 다이오드 구동전류 140mA 및 동작온도 $25^{\circ}C$의 조건하에서 거울을 수동나사로 회전시키는 성긴 튜닝(coarse tuning)시 3.475nm 의 파장가변 범위를 보였으며 PZT(piezoelectric transducer)에 200Hz의 톱니파 전압을 인가해서 거울을 회전시키는 미세튜닝(fine tuning)시 0.042nm의 범위내에서 연속적인 파장가변이 가능하였다.

  • PDF

측정변형률을 이용한 RC 구조물의 변위 응답 특성분석에 관한 실험적 연구 (An Experimental Study on Characteristic Analysis of Deflection Response of RC Structures using Measured Strain)

  • 박흥석;박기태;이규완
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권3호
    • /
    • pp.173-180
    • /
    • 2001
  • In the past few years, the nondestructive inspection technology has greatly developed due to the increased necessity to gain a complete understanding of the bridge behavior. Especially, the deformations of bridges contain a lot of informations about its health state. By measuring these deformations it is possible to analyze the loading and aging behavior of the structure. However, the current, methods (such as LVDT, dial gage, optical displacement transducer, etc) are often of changeable application on site and have the limitations of installation. In this paper, the classical beam theory was reviewed and the deflections of structure are estimated using measured strain which is easy to acquire. The applicability of this algorithm is verified by laboratory(simple reinforced concrete beam) and field test. By this test, we proposed correction factor to estimate deflection of reinforced concrete beam after cracking, and analyze about the generation of correction factor. Also fiber optic sensors as well as resistive strain gages were installed in the concrete beams to establish the applicability of fiber optic sensors in the field of civil engineering.

  • PDF

Littman 및 Littrow 타입 파장가변 반도체 레이저의 제작에 관한 연구 (A Study on the Construction of Littman and Littrow Type Tunable Diode Laser Systems)

  • 백운식
    • 한국광학회지
    • /
    • 제17권3호
    • /
    • pp.273-277
    • /
    • 2006
  • 홀버닝 광메모리의 광원으로서 상용 반도체 레이저 다이오드에 Littman형 및 고정방향 Littrow형 외부공진기를 결합하여 파장가변 레이저 다이오드 시스템을 제작하고 성능을 비교 분석하였다. 두 형태의 파장가변 레이저 다이오드 시스템 모두 0차 출력광은 단일종모드로 동작하며 CFP(Confocal Fabry-Perot)의 분해능인 9MHz이내의 선폭을 예상할 수 있었으며 다이오드 구동전류 140mA 및 동작 온도 $25^{\circ}C$의 조건하에서 거울 및 회절격자를 수동나사로 회전시키는 성긴 튜닝시 Littman형은 5.375nm, 고정방향 Littrow형은 13.65 nm이상의 파장가변 범위를 보였고 PZT (Piezoelectric Transducer)에 200Hz의 톱니파 전압을 인가해서 거울을 회전시키는 미세 튜닝 시 두 형태 모두 0.042nm의 범위 내에서 연속적인 파장가변이 가능하였다. 특히 고정방향 Littrow형 외부공진기는 출력광의 방향이 바뀌는 기존의 단점을 보강하였으며, 또한 외부공진기의 길이에 따른 최대파장가변 범위를 측정하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF