• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.120-130
• /
• 1998

In this study, we implemented a scanning capacitance decimicron micorscope(SCdM) which scans a surface of the object mechanically in two or two point five dimensions with a stylus of size 0.2.mu.m. X-Y stage and stylus driving method are used as the scanning method, and VHD disk plate and IC chip are used as the object. Experimenal resutl of these object show that SCdM obtain 0.1.mu.m resolution power which exceeds that of optical microscope, and this microscope will be used as a powerful tool for inspecting ULSI pattern or biological data as a decimicron mcirocope which zoom a function of optical microscope and guide STM. The experimental system is composed of a VHD video disk method which captures the capacitance changes of the video disk suface and converts it into video signal.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2003

We report a switchable RGB color filters for Lab on a chip. Ink color filter devices are fabricated by PDMS patterning process. The optical transmission in the ultra-violet and visible wavelengths of color filters have been investigated. The ink color filters are characterised by the slope and shape of the spectrum. The transmission of red/yellow filter consists of curves with a sharp cut-off spectrum at 600 and 500 nm. The blue output of the ink filter has 80% peak transmission and weak red-leak, while the green ink filter has 48% peak transmission and red-leak.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.101-106
• /
• 2015

Recently, silicone is being used for LED chip lens due to its good thermal stability and optical transmittance. In order to predict residual stresses, which cause optical birefringence and mechanical warpage of silicone, a finite element analysis was conducted for the curing of silicone during molding. For the analysis of the curing process, a dynamic cure kinetics model was derived based on the results of a differential scanning calorimetry (DSC) testing and applied to the material properties for finite element analysis. Finite element simulation results showed that a step cure cycle reduced abrupt reaction heat and showed a decrease in the residual stresses.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.175-181
• /
• 2005

SiOB is an essential part of slim optical pickup, where the silicon mirror, LD stand, silicon PD are integrated and LD is flip chip bonded. SiOB is fabricated with bulk micromachining. Especially the fabrication of silicon wafer with stepped concave areas has many extraordinary difficulties. As a matter of fact, experiences and knowledges are rare in the fabrication of the highly stepped silicon wafer. The difficulties occurring in the integration of PD and SiOB, and highly stepped patterning, and silicon mirror roughness and how-to-solve will be discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.425-428
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. To mold a solid-state silicone encapsulment, curing by mixing at elevated temperatures followed by cooling is necessary. As the silicone molding process is involved in healing and subsequent cooling, the thermal residual stress, which causes mechanical warpage or optical birefringence in the final silicone encapsulment, may be induced if there are non-uniformities in cured silicone material properties or encapsulment shape design. The prediction of residual stress is necessary to design a high-quality silicone molding process. Therefore, in the present paper, a numerical parametric study was attempted to evaluate the heating and cooling effects on the thermal residual stress induced in the cured silicone.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.317-318
• /
• 2008

High-efficiency high-power red PQR (photonic Quantum Ring) lasers with low threshold currents have been fabricated for low cost and low power consumption, whose structure is based upon high-power LED epi-wafers modified for vertically dominant PQR helix resonance. Preliminary experimental results are very promising for panel-less PQR laser chip TV applications.

• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.67-70
• /
• 2007

A Wide Color Gamut Backlight system was studied using a three-band white Light-Emitting Diode. A three-band white light-emitting diode (LED) was fabricated using an InGaN-based blue LED chip that emits 445-nm blue peak, and a green phosphor and red phosphor that emit 535-nm green and 621-nm red peak emissions, respectively, when excited by 450-nm blue light. Using for this three-band white LED, wide color gamut backlight unit (BLU) was attained. The luminance of BLU and CIE 1931 chromaticity coordinates was $1,700Cd/m^2$ and (0.337, 0.346). Color filter matching simulations for this configuration show that the three-band white LED backlight can be enhanced by up to 16% over conventional white LED backlight color gamut.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3239-3241
• /
• 1999

Two-dimensional optical code-division multiple access is a system to transmit a two- dimensional data via parallel transmission line. The probability density function (pdf) of interference noise from other users is calculated and the pdf of asynchronous interference noise is newly calculated to present lower bounds of probability of error. The corresponding bit error rate is evaluated from this results.

• Journal of Integrative Natural Science
• /
• v.2 no.4
• /
• pp.275-279
• /
• 2009

Recently, number of studies for porous silicon (PSi) have been investigated by many researchers. Multistructured porous silicon such as a distributed Bragg reflector (DBR) PSi, has been a topic of interest, because of its unique optical properties. DBR PSi were prepared by using an electrochemical etch of $P{^+}{^+}$-type silicon wafer with resistivity between 0.1 and $10m{\Omega}cm$. The electrochemical etch with square wave current density results in two different refractive indices in the porous layer. In this work, DBR porous silicon chips for a simple and portable organic vapor-sensing device have fabricated. The optical characteristics of DBR PSi have been investigated. DBR porous silicon have been characterized by FT-IR and Ocean optics 2000 spectrometer. The device used DBR PSi chip has been demonstrated as an excellent gas sensor, showing a great senstivity to organic vapor at room temperature.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.395-402
• /
• 2010

This study reports a portable and precision photonic biosensor reader that can measure the concentration of a particular antigen using an optical resonant reflection biosensor (ORRB). To create a compact biosensor reader, a compact tunable vertical-cavity surface-emitting laser (VCSEL) and a compact built-in wavelength meter were manufactured. The wavelength stability and accuracy of the compact built-in wavelength meter were measured to be less than 0.02 nm and 0.06 nm, respectively. The tunable VCSEL emission wavelength was measured with the compact built-in wavelength meter, it has a fast sweep time (~ 10 seconds) and a wide tuning range (> 4 nm) that are sufficient for biosensor applications based on ORRB. The reflection spectrum of a plastic based ORRB chip was measured by the fabricated portable photonic biosensor reader using the VCSEL and wavelength meter. Although the reader is the size of a palmtop device, it could make a precise measurement of the peak wavelength on equal terms with a conventional bulky optical spectrometer.