• Korean Journal of Metals and Materials
• /
• v.49 no.7
• /
• pp.583-588
• /
• 2011

$Cd_xZn_{1-x}O$ thin films were grown on quartz substrates by using the sol-gel spin-coating method. The mole fraction, x, of the $Cd_xZn_{1-x}O$ thin films was controlled from 0 to 1 by changes in the content ratio of the cadmium acetate dehydrate [$Cd{(CH_3COO)}_2{\cdot}2H_2O$] and zinc acetate dehydrate [$Zn{(CH_3COO)}_2{\cdot}2H_2O$]. The effects of the mole fraction on the morphological, structural, and optical properties of the $Cd_xZn_{1-x}O$ thin films were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-visible spectroscopy. The $Cd_xZn_{1-x}O$ thin films exhibited the polygonal surface morphology and their grain size was increased ranging from 42.1 to 63.9 nm with the increase in the mole fraction. It was observed that the absorption bandgap of the $Cd_xZn_{1-x}O$ thin films decreased from 3.25 to 2.16 eV as the mole fraction increased and the Urbach energy ($E_U$) values changed inversely to the optical bandgap of the $Cd_xZn_{1-x}O$ thin films.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.211-218
• /
• 2022

In this paper, a computer simulation program was developed to interpret the results measured by photoreflectance spectroscopy. The developed program is implemented so that the user can easily change the factors required for optical modulation characteristic interpretation, and the result of the value can be checked simultaneously with the actual measurement result. The results obtained by photoreflectance spectroscopy are obtained by mixing a third derivative function form (TDFF) modulated around a bandgap with a Franz-Keldysh oscillation (FKO) signal due to an electric field at a surface and an interface higher than the bandgap. Through the computer simulation program, the optical characteristics that appear in the GaSb Epi layer formed as a single layer were analyzed, and very useful results were obtained by specializing in optical modulation analysis. In addition, a Fast Fourier Transform (FFT) analysis tool was added to facilitate frequency characteristics analysis of FKO.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2002

The world at the end of the $20^{th}$ Century has become "blue" Indeed, this past decade has witnessed a "blue rush" towards the development of violet-blue-green light emitting diodes (LEDs) and laser diodes (LDs) based on wide bandgap III-Nitride semiconductors. And the hard work has culminated with, first, the demonstration of commercial high brightness blue and green LEDs and of commercial violet LDs, at the very end of this decade. Thanks to their extraordinary properties, these semiconductor materials have generated a plethora of activity in semiconductor science and technology. Novel approaches are explored daily to improve the current optoelectronics state-of-the-art. Such improvements will extend the usage and the efficiency of new light sources (e.g. white LEDs), support the rising information technology age (e.g. high density optical data storage), and enhance the environmental awareness capabilities of humans (ultraviolet and visible photon detectors and sensors). Such opportunities and many others will be reviewed in this presentation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.179.1-179.1
• /
• 2014

Si nanowires have exhibited unique optical characteristics, including nano-antenna effects due to the guided mode resonance, significant optical absorption enhancement in wide wavelength and incident angle range due to resonant optical modes, graded refractive index, and scattering. Since Si poor optical absorption coefficient due to indirect bandgap, all such properties have stimulated proposal of new optoelectronic devices whose performance can surpass that of conventional planar devices. We have carried out finite-difference time-domain simulation studies to design optimal Si nanowire array for solar cell applications. Optical reflectance, transmission, and absorption can be calculated for nanowire arrays with various diameter, length, and period. From the absorption, maximum achievable photocurrent can be estimated. In real devices, serious recombination loss occurring at the surface states is known to limit the photovoltaic performance of the nanowire-based solar cells. In order to address such issue, we will discuss how the geometric parameters of the array can influence the spatial distribution of the optical field (resulting optical generation rate) in the nanowires.

• Advances in materials Research
• /
• v.12 no.3
• /
• pp.179-192
• /
• 2023

We have studied the structural and optical properties of the non-doped and Co 0.08 at.%, Co 0.02 at.%, and Co 0.11 at.% doped ZnO nanorods (NRs) synthesized using the simple low-temperature chemical bath deposition (CBD) method at 95℃ for 2 hours. The scanning electron microscope (SEM) images confirmed the morphology of the ZnO NRs are affected by Co incorporation. As observed, the Co 0.08 at.% doped ZnO NRs have a larger dimension with an average diameter of 153.4 nm. According to the International Centre for Diffraction Data (ICDD) number #00-036-1451, the x-ray diffraction (XRD) pattern of non-doped and Co-doped ZnO NRs with the preferred orientation of ZnO NRs in the (002) plane possess polycrystalline hexagonal wurtzite structure with the space group P63mc. Optical absorbance indicates the Co 0.08 at.% doped ZnO NRs have stronger and blueshift bandgap energy (3.104 ev). The room temperature photoluminescence (PL) spectra of ZnO NRs exhibited excitonicrelates ultraviolet (UV) and defect-related green band (GB) emissions. By calculating the UV/GB intensity, the Co 0.08 at.% is the proper atomic percentage to have fewer intrinsic defects. We predict that Co-doped ZnO NRs induce a blueshift of near band edge (NBE) emission due to the Burstein-Moss effect. Meanwhile, the redshift of NBE emission is attributed to the modification of the lattice dimensions and exchange energy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.320-323
• /
• 2018

SiGe thin films were deposited by remote plasma enhanced chemical vapor deposition (RPE-CVD) at $400^{\circ}C$ using $SiH_4$ or $SiCl_4$ and $GeCl_4$ as the source of Si and Ge, respectively. The growth rate and the degree of crystallinity of the fabricated films were characterized by scanning electron microscopy and Raman analysis, respectively. The optical and electrical properties of SiGe films fabricated using $SiCl_4$ and $SiH_4$ source were comparatively studied. SiGe films deposited using $SiCl_4$ source showed a lower growth rate and higher crystallinity than those deposited using $SiH_4$ source. Ultraviolet and visible spectroscopy measurement showed that the optical band gap of SiGe is in the range of 0.88~1.22 eV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.40-43
• /
• 1995

In this paper, structual, optical and electrical properties of CdZnS thin films prepared by electron beam evaporation method were studied. The crysta1 structure of CdZnS films deposited was hexagonal type with preferential orientation of the (002) plane parallel to the substrate. The results of optical transmittance of the CdZnS film show that absorption edge is shifted to ZnS and optical bandgap was larger wish increasing ZnS content. The resistivity of the CdZnS film is decreasing with increasing ZnS content and mininum for 20 mole%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.260-261
• /
• 2000

광결정(photonic crystal)은 빛의 파장 크기 정도의 격자 상수를 지닌 1차원, 2차원, 또는 3차원의 주기적인 구조이다. 광결정에는 광밴드갭(photonic bandgap)이라는 빛의 자발 방출이 억제된 진동수의 영역이 존재하는데, 이 영역을 이용하여 빛의 자발 방출을 조절하고 빛의 흐름을 제어할 수 있다. $^{[1]}$ 지난 10여년간 2차원, 3차원의 광결정 구조에 대한 연구가 많이 이루어져 왔는데, 최근에는 슬랩 도파관(slab waveguide)에 2차원 광결정을 만든 구조에 대한 연구가 활발하게 진행중이다. 이 구조는 평면 방향으로는 광밴드갭 효과로 광모드를 가둘 수 있고 수직 방향으로는 전반사를 이용하여 모드를 가둘 수 있어서 3차원적인 모드 confinement 효과를 얻을 수 있다. [그림 1]의 (a)에 air-bridge 형태의 2차원 광결정 슬랩(photonic crystal slab) 구조를 도식적으로 나타내었고, (b)에는 본 연구실에서 제작한 구조 표면의 scanning electron micrograph을 나타내었다. 현재 몇몇 연구 그룹에서 이와 같은 광결정 슬랩 구조를 이용한 반도체 레이저를 실현하는데 성공하였다.$^{[2,3]}$ (중략)

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2276-2280
• /
• 2008

In this paper, we present thermal dependancy of LED package element by changing temperature of MCPCB for design high efficiency LED lamp, and confirmed influence of LED chip against temperature with analysis of thermal resistance and thermal capacitance. As increasing temperature, WPOs were decreased from 25 to 22.5 [%] and optical power were also decreased. that is decreased reason of optical power that forward voltage was declined by decrease of energy bandgap. Therefore optical power by temperature of MCPCB should consider to design lamp for street light and security light. Moreover, compensation from declined optical efficiency is demanded when LED package is composed. Also, thermal resistances from chip to metal PCB were decreased from 12.18 to 10.8[$^{\circ}C/W$] by changing temperature. Among the thermal resistances, the thermal resistance form chip to die attachment was decreased from 2.87 to 2.5[$^{\circ}C/W$] and was decreased 0.72[$^{\circ}C/W$] in Heat Slug by chaning temperature. Therefore, because of thermal resistance gap in chip and heat slug, reliability and endurance of high power LED affect by increasing non-radiative recombination in chip from heat.