• 한국광학회지
• /
• 제18권2호
• /
• pp.122-129
• /
• 2007

디지털 홀로그래피를 이용하여 얻어진 위상정보는 위상펼침 알고리즘을 이용하여 3차원 상을 구현할 수 있다. 위상펼침 방법에는 다양한 알고리즘이 사용되고 있다. 이중 연산 시 사용하는 메모리용량이 작고 연산시간이 짧은 골드스타인 알고리즘이 많이 사용된다. 골드스타인 알고리즘은 쌍을 이루는 특이점이 아닌 다른 특이점이 가까울 때 잘못된 연산을 수행하여 잘못된 3차원 정보를 준다. 이러한 골드스타인 알고리즘의 오류를 특이점과 경계면 데이터를 이용하여 수정하였다. 수정된 알고리즘을 이용하면 분해 한계 영역의 데이터도 복원될 수 있음을 확인하였다. 수정된 알고리즘의 연산시간은 골드스타인 알고리즘보다 약 10%가 증가되지만 다른 알고리즘에 비하면 연산시간이 짧다.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.265-272
• /
• 2017

Velocity ripple in manufacturing processes reduces productivity and limits the precision of the product. In practice, the frequency and phase of velocity ripples always change minutely, which makes it impossible to compensate for the ripple by simply inserting an opposite feed-forward signal in the system. In this study, an active-phase compensation algorithm was developed to enable the velocity-ripple controller to track the phase change of the ripples in real time. The proposed controller can compensate for the velocity ripple whatever its cause, including disturbance by the torque ripple. The algorithm consists of three functional modules: the velocity-ripple extractor, the synchronized integrator, and the phase shifter. Experimental results showed that the proposed controller clearly reduces velocity ripples with phase variation.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.635-636
• /
• 2006

In this study, the diffusion behaviors of C and Co in liquid phase sintering of WC-Co system were investigated whether these two components diffused in the same direction in case of having opposite gradient each other with not being $\eta$ phase. The green compacts with controlled compositions in not being of $\eta$ phase and gradient composition which one is WC-5Co-1.2%C, the other is WC-XCo-0.2%C (where X = 5, 10, 15, 20, 25) were sintered at $1350^{\circ}C$ and $1400^{\circ}C$ and then the diffusion behaviors of C and Co were investigated by analyses of compositional change, also determined for microstructure and microhardness. Also, same testing was carried out on the specimens with dual layers sintered in upright and reverse positions to evaluate the effect of gravity on the diffusion in liquid Co. From the results of this study, we can find the fact that the direction of diffusion for C and Co in WC-Co system during liquid phase sintering was different and the effect of gravity for the liquid was insignificant. Also other physical properties were changed on the diffusion of elements.

• Applied Microscopy
• /
• 제16권2호
• /
• pp.14-24
• /
• 1986

The interrelation of secondary defects, intermediate S' phase and aging condition in Al-2.0 wt% Cu-1.1 wt% Mg alloy is studied by transmission electron microscope. The results obtained in this study are as follows. 1. High density of dislocation loops, helices and stacking faults are observed in this specimen with aging treatment. 2. The number of dislocation loops and the width of loop free zone (LFZ) are increased with aging time. 3. The intermediate S' phase precipitates and grows on the dislocations and secondary defects. 4. The misfit dislocations are formed around intermediate S' phase. 5. It is thought that the helices appear to be produced by the climb of screw dislocations, while the dislocation loops appear to be formed both by condensation of vacancies into collapsed discs and by interaction of helices with screw of opposite sign.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1610-1624
• /
• 1998

An axisymmetric jet is forced with two helical fundamental waves of identical frequency spinning in opposite directions and an additional axisymmetric sub harmonic wave. The subharmonic component rapidly grows downstream from subharmonic resonance with the fundamental, significantly depending on the initial phase difference. The variations of the subharmonic amplitude with the initial phase difference show cusp-like shapes. The amplification of the sub harmonic results in 'vortex pairing of helical modes'. Furthermore, azimuthal variation of the amplification induces an asymmetric jet cross-section. When the initial subharmonics is imposed with an initial phase difference close to a critical value, the jet-cross section evolves into a three-lobed shape. One lobe is generated by the enhanced vortex pairing and the other two lobes are generated by the delayed vortex pairing. Thus, it is confirmed that the initial phase difference between the fundamental and the subharmonic plays an important role in controlling the jet cross-section.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.474-493
• /
• 1999

According to repeated measurements and correction procedures, the accuracy of the phase-shifting profilometry was developed. At first, after 20 final models for maxillary complete denture were duplicated , the mucosa sur-faces of models were measured with the phase-shifting proflometry and each mirror view of these was calibrated. Maxillary casts were divided into 4 groups of 5 casts per each, and wax dentures with 2 sheets of baseplate wax and artificial teeth were made and then cured according to the curing method of each group. Group I ; quick curing with QC-20 acrylic resin Group II ; 9 hour curing with QC-20 acrylic resin Group III ; SR-Ivocap system Group IV ; metal base and quick curing with QC-20 acrylic resin. After curing, polishing, and storing at $37^{\circ}C$ in saline for 30 days, the forms of the impression surface of the dentures were measured with the phase-shifting profilometry. Then, the impression surface form of each denture was placed in the optimal position of com-parison with the mirror view of the same final cast. The amount and direction of distortion of each denture was analyzed and the effects of polishing and storage in each denture were compared, The obtained results were as follows : 1. In Group I, the denture was observed as the appearance distorted in the opposite direction of the mucosa and the postero-lateral part of palatal portion of the denture was observed as the appearance separated from the mucosa. Also, the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa. 2. In Group II, the postero-lateral part of palatal portion of the denture was observed as the appearance separated slightly from the mucosa. The bilateral buccal flanges of denture were observed as the appearance distorted severely in the direction of the mucosa. 3. In Group III the bilateral part of the residual ridge crest portions and the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa, and specially, the buccal flanges of the maxillary tuberosities were distorted severely. 4. In Group IV, the acrylic resin base of the buccal portion of the denture was observed as the appearance distorted in the opposite direction of the mucosa. 5. The phase-shifting profilometry, done with repeated measurements and correction procedures, was effective in comparing the amount and direction of distortion at every position after the laboratory work and the delivery of maxillary complete denture.

• 한국미생물·생명공학회지
• /
• 제26권1호
• /
• pp.55-60
• /
• 1998

수용성 이상계에서 효율적인 추출발효를 수행하기 위해서는 생체촉매와 생성물이 서로 반대 상에 우세하게 분배되어아 한다. 일반적으로 분자량이 낮은 생성물은 양쪽상에 비슷하게 분배되므로, 상의 조성 등을 조절하여 한쪽상의 체적을 증가시켜 최대한으로 생성물을 추출하여야 한다. 본 연구에서는 PEI와 HEC으로 구성된 수용성 이상계에서 L. helveticus와 젖산의 분배에 미치는 다가 음이온의 농도, pH, 배지의 농도 및 생육배지 농도 등의 영향을 검토하였다. PEI의 상대 이온으로 작용하는 phosphate, sulfate 음이온수의 증가는 PEI 상의 체적을 감소시켜 하부상에 분배되는 세포의 양(Cb)을 감소시켰으며, sulfate 농도의 영향은 phosphate에 비해 적었다. 검토한 범위에서 대략 93%이상의 세포가 HEC-rich상부상에 분배되었다. 이상계에 생육배지 농도를 달리하여 첨가했을 때 배지 중에 존재하는 phosphate와 sulfate 농도에 따라 비슷한 경향을 나타냈지만 낮은 농도로 인하여 그 영향은 크지 않았다. Phosphate 농도에 따른 젖산분배를 검토한 결과 농도가 증가할수록 분배계수는 감소하였으며, 대략 85%가량의 젖산이 PEI의 하부상에 분배되었다. 이 결과로부터 수용성 이상계에서 전하를 띤 저 분자량의 생성물의 추출은 반대 전하를 띠는 폴리머를 하나의 상형성 풀리머로 사용함으로써 증진되었음을 알 수 있었다. 따라서 L. helveticus 세포는 95% 정도가 상부상에 분배되고 젖산은 85%정도가 하부상에 우세하게 분배되므로 PEI/HEC 이상계는 치즈유청으로 부터의 젖산의 추출발효에 가능성이 높은 시스템으로 응용될 수 있는 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.827-837
• /
• 2015

Following a severe accident in a nuclear power plant, iodine is a major contributor to the potential health risks for the public. Because the amount of iodine released largely depends on its volatility, iodine's behavior in containment has been extensively studied in international programs such as International Source Term Programme-Experimental Program on Iodine Chemistry under Radiation (EPICUR), Organization for Economic Co-operation and Development (OECD)-Behaviour of Iodine Project, and OECD-Source Term Evaluation and Mitigation. Korea Institute of Nuclear Safety (KINS) has joined these programs and is developing a simplified, stand-alone iodine chemistry model, RAIM (Radio-Active Iodine chemistry Model), based on the IMOD methodology and other previous studies. This model deals with chemical reactions associated with the formation and destruction of iodine species and surface reactions in the containment atmosphere and the sump in a simple manner. RAIM was applied to a simulation of four EPICUR tests and one Radioiodine Test Facility test, which were carried out in aqueous or gaseous phases. After analysis, the results show a trend of underestimation of organic and molecular iodine for the gas-phase experiments, the opposite of that for the aqueous-phase ones, whereas the total amount of volatile iodine species agrees well between the experiment and the analysis result.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.117-127
• /
• 2023

To efficiently attenuate seismic responses of a structure, a novel pneumatic-driven active dynamic vibration absorber (PD-ADVA) is proposed in this study. PD-ADVA aims to realize closed-loop control using a simple and intuitive control algorithm, which takes the structure velocity response as the input signal and then outputs an inverse control force to primary structure. The corresponding active control theory and phase control mechanism of the system are studied by numerical and theoretical methods, the system's control performance and amplitude-frequency characteristics under seismic excitations are explored. The capability of the proposed active control system to cope with frequency-varying random excitation is evaluated by comparing with the optimum tuning TMD. The analysis results show that the control algorithm of PD-ADVA ensures the control force always output to the structure in the opposite direction of the velocity response, indicating that the presented system does not produce a negative effect. The phase difference between the response of uncontrolled and controlled structures is zero, while the phase difference between the control force and the harmonic excitation is π, the theoretical and numerical results demonstrate that PD-ADVA always generates beneficial control effects. The PD-ADVA can effectively mitigate the structural seismic responses, and its control performance is insensitive to amplitude. Compared with the optimum tuning TMD, PD-ADVA has better control performance and higher system stability, and will not have negative effects under seismic wave excitations.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.45-52
• /
• 1995

수평 유로를 통과하는 이상류 내에서 기체상의 난류 응력이 이상류 시스템의 전반적 거동 특성에 미치는 영향을 연구하였다. 이를 위하여 이미 오랜 연구 노력으로 입증된 평균 이상류 거동 방정식을 채택하여 수평관에서 흔히 발생하는 성층류형 이상류에 대하여 적절히 모델하였다. 모델의 고유치를 계산하고 그의 특성 방정식으로부터 이상류 시스템의 well-posedness 및 다른 이상 유동 영역으로의 천이 경계를 새로이 결정하였다. 그 결과로 지금까지 무시해 왔던 기체상의 난류웅력이 이상류 시스템의 안정성에 커다란 영향을 주는 것이 발견되었다. 본 연구에서는 그 영향이 정량화 되었으며 그외의 효과도 정량화 하는 방법을 정립하였다. 본 연구는 원자로 시스템 해석 코드에 쓰이고 있는 열수력 모델 중 불확실성이 많은 모델인 수평관에서의 이상유동 영역 천이 조건식을 개선함으써 시스템 해석 결과의 신뢰도를 높이는 데 이용할 수 있다.