• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.132-136
• /
• 1994

The new spray system is proposed by using a pipe with hygroscopic needle electrode In order to develop an air-cleaning ESP with high collection efficiency for submicron particles and high removal efficiency for NOx, SO$_2$, NH$_3$. Fundamental characteristics of charging water spray, which is not an usual wet type, are investigated experimentally. As a result, corona discharging mode and ozone generation rate are significantly affected by the operational conditions, such as the applied voltage and wet condition of the needle electrode.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.49-56
• /
• 2004

It has been estimated that up to $80\%$ of all marine accidents have human elements as a cause. t of these, human elements of crew fatigue is main causes of marine accident. Crew fatigue involves sleep, schedule. workload. off-time. alcohol health and stress. With a ship handling simulator, the effect of alcohol on ship operational performance is studied for each 0.05 and $0.08g\%$ blood alcohol concentrations. A main effect for alcohol was found indicating that ship operational performance was significantly impaired by this alcohol relative to performance in the non-alcohol condition. The results of this research can be applied to minimize marine accidents as basic data.

• Smart Structures and Systems
• /
• v.33 no.3
• /
• pp.189-199
• /
• 2024

To properly extract the strain components under varying operational conditions is very important in bridge health monitoring. The abnormal sensor readings can be correctly identified and the expected operational performance of the bridge can be better understood if each strain components can be accurately quantified. In this study, strain components under varying load conditions, i.e., temperature variation and live-load variation are evaluated based on field strain measurements collected from a real concrete box-girder bridge. Temperature-induced strain is mainly regarded as the trend variation along with the ambient temperature, thus a smoothing technique based on the wavelet packet decomposition method is proposed to estimate the temperature-induced strain. However, how to effectively extract the vehicle-induced strain is always troublesome because conventional threshold setting-based methods cease to function: if the threshold is set too large, the minor response will be ignored, and if too small, noise will be introduced. Therefore, an autoencoder framework is proposed to evaluate the vehicle-induced strain. After the elimination of temperature and vehicle-induced strain, the left of which, defined as the model error, is used to assess the operational performance of the bridge. As empirical techniques fail to detect the degraded state of the structure, a clustering technique based on Gaussian Mixture Model is employed to identify the damage occurrence and the validity is verified in a simulation study.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.447-454
• /
• 2024

Construction site monitoring is pivotal for overseeing project progress to ensure that projects are completed as planned, within budget, and in compliance with applicable laws and safety standards. Additionally, it seeks to improve operational efficiency for better project execution. To achieve this, many researchers have utilized computer vision technologies to conduct automatic site monitoring and analyze the operational status of equipment. However, most existing studies estimate real-world 3D information (e.g., object tracking, work status analysis) based only on 2D pixel-based information of images. This approach presents a substantial challenge in the dynamic environments of construction sites, necessitating the manual recalibration of analytical rules and thresholds based on the specific placement and the field of view of cameras. To address these challenges, this study introduces a novel method for 3D visualization and status analysis of construction site objects using 3D reconstruction technology. This method enables the analysis of equipment's operational status by acquiring 3D spatial information of equipment from single-camera images, utilizing the Sam-Track model for object segmentation and the One-2-3-45 model for 3D reconstruction. The framework consists of three main processes: (i) single image-based 3D reconstruction, (ii) 3D visualization, and (iii) work status analysis. Experimental results from a construction site video demonstrated the method's feasibility and satisfactory performance, achieving high accuracy in status analysis for excavators (93.33%) and dump trucks (98.33%). This research provides a more consistent method for analyzing working status, making it suitable for practical field applications and offering new directions for research in vision-based 3D information analysis. Future studies will apply this method to longer videos and diverse construction sites, comparing its performance with existing 2D pixel-based methods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.74-81
• /
• 2024

In the near future, autonomous ships, ships controlled by shore remote control centers, and ships operated by navigators will coexist and operate the sea together. In the advent of this situation, a method is required to evaluate the safety of the maritime traffic environment. Therefore, in this study, a plan to evaluate the safety of navigation through ship control simulation was proposed in a maritime environment, where ships directly controlled by navigators and autonomous ships coexisted, using autonomous operation technology. Own ship was designed to have autonomous operational functions by learning the MMG model based on the six-DOF motion with the PPO algorithm, an in-depth reinforcement learning technique. The target ship constructed maritime traffic modeling data based on the maritime traffic data of the sea area to be evaluated and designed autonomous operational functions to be implemented in a simulation space. A numerical model was established by collecting date on tide, wave, current, and wind from the maritime meteorological database. A maritime meteorology model was created based on this and designed to reproduce maritime meteorology on the simulator. Finally, the safety evaluation proposed a system that enabled the risk of collision through vessel traffic flow simulation in ship control simulation while maintaining the existing evaluation method.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.175-182
• /
• 2017

Background: With the recent rapid industrialization, occupational safety and health (OSH) has become an important issue in all industrial and human activities. However, incidents of injuries and fatality rates in the Ghanaian industry sector continue to increase. Despite this increase, there is no evidence regarding the element of OSH management in transport activities in Ghanaian industries. Thus, this study aims to examine the perceptions regarding the importance of safety and health in work-related transport activities in Ghanaian industries. Methods: A survey data collection technique was used to gather information on best safety practices over a 5-month period. We randomly selected 298 respondents from industries to answer structured questionnaires. The respondents included drivers, transport managers, and safety engineers. Standard multiple regression model and Pearson product-movement correlation were used to performed the analysis. Results: The result shows that for interventions to improve safety and health, concentration has been on drivers' safety practice with less attention to safe driving environments and vehicle usage. Additionally, the respondents are aware of the importance of OSH in transport activities, but the level of integration does not measure up to the standard to reduce operational accidents and injuries. Finally, strong commitment to changing unsafe practices at all levels of operations appears to be the effective way to improve safety situations. Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.84-90
• /
• 2021

98.8% of accidents occurring in domestic companies are concentrated in small-sized workplaces with fewer than 50 employees. Therefore, this study developed a disaster safety program that can be implemented by small and medium-sized enterprises by comparing and analyzing the safety management system actively used with the laws and regulations related to industrial safety and facilities. The disaster and safety program included the scope of application, organizational structure, risk assessment, emergency response system, education and training, safety equipment provision and program evaluation, and detailed preparation methods and procedures for each item. In addition, items to be aware of when operating a disaster safety program and operational strategies were presented. After that, it was proposed to introduce the research results into the Occupational Safety and Health Act.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.763-774
• /
• 2021

The COVID-19 virus has generated major shockwaves in all spheres of human life since its outbreak. Maritime transport (both cargo and passenger) is one of the industries most heavily affected, yet over 80% of the world cargo is transported by sea. This study analyzes maritime port operational efficiencies before and after the start of the COVID-19 pandemic to determine whether the pandemic has caused major differences in the operational efficiencies of many leading Asian maritime container ports via data envelopment analysis (DEA). The results of both the CCR and BCC models reveal that overall, efficiency during the COVID-19 pandemic has been higher than before the pandemic despite a few inefficiencies. This implies that the pandemic has so far not has major consequences for the operational efficiency of maritime ports. However, two ports (Busan and Guangzhou) should adjust the scale sizes and technical capacities of their operations to improve performance.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.35-40
• /
• 2006

A study on fire phenomena in a subway transit mass station has been carried out as a part of disaster prevention plan at the subway station. The ventilation facilities installed in both the platform and the trackway are designed to convert into a smoke exhaust system in emergency situation, creating such an environment as necessary for evacuation. 3 dimensional Numerical Simulations based on the CFD are carried out using a simulation tool, Fire Dynamic Simulator. Additionally, four different vent modes are made and performances are compared with the original design mode and each other to find better operation of vents at both the platform and the trackway in case of fire. From the result, an vent operational characteristics under the condition of installed PSD is clarified for the effective smoke and heat removal from the platform area compared with non installed PSD.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.