• 디지털융복합연구
• /
• 제18권1호
• /
• pp.11-21
• /
• 2020

본 연구는 경기도를 주요 분석대상으로 하여 공유재산 보유현황, 관리체제와 운영성과, 운영의 한계점 등을 분석하였다. 또한 경기도와 서울특별시, 인천광역시 등의 타 광역단체들의 공유재산 관리체제를 비교·분석하여 시사점을 얻고자 하였다. 동시에 경기도 전체 공유재산 실무담당자를 대상으로 공유재산 운영과 관련된 설문조사를 실시하였다. 분석결과, 경기도는 재정자립도가 완전하지 않기 때문에 재원확충이 중요인데도 불구하고 공유재산의 세외수입 실적이 보유규모에 비해 미미한 수준이다. 그 원인으로는 무엇보다도 공유재산 관리전담부서가 별도로 신설되어 있지 않고 기존의 업무를 담당하는 주무부서도 행정력이 부족하다는 점이 주요 원인이라 판단된다. 따라서 본 연구에서는 공유재산의 운영 성과와 기타 재산 가치를 증대시키기 위해서는 공유재산 전담부서를 신설할 것을 제안하고자 한다. 설문조사에서도 공유재산 운영 성과를 개선시키려면 현재의 관리체제를 개편해야 하며 그 개편방향은 전담부서의 신설이어야 한다는 인식이 형성되어 있음을 확인할 수 있었다.

• Journal of Smart Tourism
• /
• 제1권2호
• /
• pp.13-18
• /
• 2021

Hotels have recently started to implement enterprise information systems to measure and report sustainability indicators in a smart manner. However, a complex ownership structure in a hotel chain prevents full smart systems adoption at the individual property level. This study explores how a smart sustainability performance measurement system (SPMS) for waste management adoption correlates with customer ratings, customer reviews, operational efficiency scores, and between franchised and corporate-managed properties. We derive insights from the secondary data constructed from multiple sources for a large multinational hotel chain hotel. The findings suggest that hotels that adopt SPMS have better operational efficiency scores and more customer reviews. Within the hotels that adopted SPMS, corporate-managed hotels have a lower level of ratings than franchised hotels, but they have higher operational efficiency scores and more reviews. We discuss research implications for the concept of smart tourism and hotel management literature and managerial implications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.291-293
• /
• 1999

This paper proposed the optimal operational scheduling of cogeneration system for paper mill connected with several auxiliary devices. Auxiliary devices that include auxiliary boilers, waste heat boilers and sludge incinerators operate with multi-cogeneration systems. Especially environment element was considered in objective function to solve the environment problem. And GAs(Genetic Algorithms) was applied to optimize and to analyse nonlinear operational property of cogeneration system of paper mill connected with several auxiliary devices. C-language was used to GAs computation. Electricity can be purchased through power system from utility. The proposed operational strategy on cogeneration system for paper mill to increase energy efficiency can be applied to the similar cogeneration system of industrial field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.563-566
• /
• 1988

A current-controlled CMOS operational transconductance amplifier(OTA), whose transconductance is directly proportional to the DC bias current, has been developed for many electronic circuit applications. It features that its transconductance is insensitive to temperature unlike that of the bipolar OTA. This property makes it possible to use the proposed OTA as a basic buliding block in electrically variable circuit design. The SPICE simulation shows that the conversion sensitivity of the circuit is 44.62 mv /${\mu}A$ and the linearity error less than 0.54 % over a bias current range from 2 ${\mu}A$ to 120 ${\mu}A$ when the output is loaded with a 1${\Omega}$ resistor.

• Kyungpook Mathematical Journal
• /
• 제20권1호
• /
• pp.121-127
• /
• 1980

In the present paper the multiple generalized prolate spheroidal wave transform has been developed and its useful operational property has been discussed. As an application of this new transform we have considered the non-homogeneous cubical region. The source of heat generation lies inside it and is dependent upon temperature, and the conductivity is variable.

• 대기
• /
• 제34권2호
• /
• pp.107-121
• /
• 2024

In this study, we empirically analyzed the impact of physical risks due to climate change on the soundness and operational performance of the financial industry by combining economics and climatology. Particularly, unlike previous studies, we employed the Seasonal-Trend decomposition using LOESS (STL) method to extract trends of climate-related risk variables and economic-financial variables, conducting a two-stage empirical analysis. In the first stage estimation, we found that the delinquency rate and the Bank for International Settlement (BIS) ratio of commercial banks have significant negative effects on the damage caused by natural disasters, frequency of heavy rainfall, average temperature, and number of typhoons. On the other hand, for insurance companies, the damage from natural disasters, frequency of heavy rainfall, frequency of heavy snowfall, and annual average temperature have significant negative effects on return on assets (ROA) and the risk-based capital ratio (RBC). In the second stage estimation, based on the first stage results, we predicted the soundness and operational performance indicators of commercial banks and insurance companies until 2035. According to the forecast results, the delinquency rate of commercial banks is expected to increase steadily until 2035 under assumption that recent years' trend continues until 2035. It indicates that banks' managerial risk can be seriously worsened from climate change. Also the BIS ratio is expected to decrease which also indicates weakening safety buffer against climate risks over time. Additionally, the ROA of insurance companies is expected to decrease, followed by an increase in the RBC, and then a subsequent decrease.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.155.4-155
• /
• 2001

This paper deals with the inertia property-based redundancy resolution in posture control of a mobile manipulator. As a measure for the redundancy resolution of a mobile manipulator, an effective inertia at the end effector in the operational space is proposed and investigated. The reduced effective inertia has a significant effect on reducing the impulse force in collision with environment. To find a posture satisfying both the reduced inertia and joint limit constraints, we propose a combined potential function method that can deal with multiple constraints. The proposed reduced inertia property algorithm is integrated into a damping controller to reduce the impulse force at collision and to regulate the contact force in mobile manipulation ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.793-796
• /
• 1996

This study proposes a new algorithm which performs a production simulation under various constraints and maintains computational efficiency. In order to consider the environmental and operational constraints, the proposed algorithm is based on optimization techniques formulated in LP form In the algorithm, "system characteristic constraints" reflect the system characteristics such as LDC shape, unit loading order and forced outage rate. By using the concept of Energy Invariance Property and two operational rules i.e. Compliance Rule for Emission Constraint, Compliance Rule for Limited Energy of Individual Unit, the number of system characteristic constraints is appreciably reduced. As a solution method of the optimization problem, the author uses Karmarkar's method which performs effectively in solving large scale LP problem. The efficiency of production simulation is meaningful when it is effectively used in power system planning. With the proposed production simulation algorithm, an optimal expansion planning model which can cope with operational constraints, environmental restriction, and various uncertainties is developed. This expansion planning model is applied to the long range planning schemes by WASP, and determines an optimal expansion scheme which considers the effect of supply interruption, load forecasting errors, multistates of unit operation, plural limited energy plants etc.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.125-131
• /
• 2002

Surface defects in injection molded parts are due to the unsteady flow of polymer melt which are related to the geometries of cavity and gate, the operational conditions of injection and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for three kinds of PCs which have different molecular weight and structure, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to die swell. This means that the jetting is strongly affected by the elastic property rather than the viscous property in viscoelastic characteristics of molten polymer. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mold design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and associated surface defects regardless of magnitude of elastic property. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.211-216
• /
• 2003

Weld line in injection molded part is one of the defect in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study weld line strength has been examined according to the injection operational conditions, materials and mold designs. PC and PP were used, and four different specimens were used in this experiment. Weld line strength decreased as injection temperature increases for PC. It was more dependent on mold temperature than injection temperature for PP Among the four different specimens, uneven thickness specimen showed the highest weld line strength.