• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.915-925
• /
• 2012

On-off control performance of target pumping station was experimented by changing measurement methods for storage level or inflow and operating logic for control system setting. Four scenarios with different measurement methods and operational logic were examined in the Matlab/Simulink environment. Controller's on-off control repetition that was frequent before has been reduced and more effective and stable system operation was found to be possible with the scenarios. Moreover, defensive operation enforced prevention of floods by changing measurement methods enabled economic operation that made an utmost use of storage volumes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.68-76
• /
• 2021

The series hybrid system targeted in this study uses a reciprocating engine, a generator, and a battery as a main power source for the unmanned aerial vehicle. The generator is directly connected to the drive shaft of the reciprocating engine, and the operating characteristics of the reciprocating engine-generator set were confirmed through ground integration tests. In this study, based on the test results, a control logic is proposed an efficient use of the reciprocating engine-generator power and battery power. Also, the power variations of the reciprocating engine-generator and battery according to the logic were verified through simulation. As a result, it was confirmed that the engine-generator power supplied the power required for propulsion along with the battery power by the proposed control logic.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1562-1569
• /
• 2008

In this paper, the study on development of an applicable logic on the characteristics of Rolling stocks will be proposed. In general, this logic which means decision logic or LTA(Logic Tree Analysis) is used to analyze how the failure mode have an effects on the system. The effect would be categorized as safety, operational, economical, etc. To do this, based on the typical logics which have been applied to other industries, such as plants, aero, etc. This paper emphasizes two crucial parameters that is one cost the other customer service, that have an important role in railway system operation. In conclusion, as mentioned above as the logic for which could be effectively applied for the railway system(RST) would be developed.

• Journal of The Korean Association For Science Education
• /
• v.9 no.1
• /
• pp.19-37
• /
• 1989

The purpose of this study was to investigate the development of logical thinking and scientific reasoning pattern of Korean high school students. To carry out this study subjects were selected about 2,000 Junior high school students, and about 4,100 senior high school students throughout the nation. They were identified as concrete, transitional or formal operational stage with the use of TOLT(the Test of Logical Thinking) by Tobin and Capie(1980), and TOSR(the Test of Scientific Reasoning) by W.A Farmer(1986). This study turned out that more than 76% of Junior high school students were classified as the concrete operational stage and about 44% of senior high school students were classified as the formal operational stage, while about 26% of them were still in the concrete operational level. This study showed that the main factor of the intellectual development of students is learning by the gradual advancement of their grades and especially entrance into the senior high school rather than by the physical growth. This study also showed that there are the take-off stage of the development of logical thinking between fourteen and fifteen years of their ages. Less than 25% of junior high school students were in the formal operational stages which are capable of control of variables, probabilistic, correlation and combinational logic in problem-solving situation, while 33-54% of senior high school students were in the formal operational levels. 38% of junior high school students were in the formal operational stage which is capable of proportional logic, while about 55% of senior high school students were in the formal operational stage. Less than 20% of senior high school students were classified as group of highly capable of scientific reasoning, while more than 23% of them were classified as group of poor capability. It also turned out that there are differences or no differences between male and female students of each school in problem-solving situation regarding each logic approach. These differences were proved to be fluctuating depending on the situations and their grades. The other results of this study is similar to those of other researches such as Tomlinson-Keasey 1972, Coleman 1973, Lawson 1973, Lawson and Renner 1974, Neimark 1975, Han 1982, and Kim 1989.

• Journal of Applied Reliability
• /
• v.3 no.1
• /
• pp.73-82
• /
• 2003

Reliability Centered Maintenance(RCM) was initially developed for the commercial aviation industry in the late 1960s and now is equally applicable to a variety of equipment other than aircraft. RCM is a method for establishing a preventive maintenance program which will efficiently and effectively allow the achivement of the the required safety and availability levels of equipment and structures. RCM provides for the use of a decision logic tree to identify applicable and effective preventive maintenance requirements for equipment and structures according to the safety, maintenance requirements for equipment and structures according to the safety, operational and economic consequences of identifiable failures, and the degradation mechanism, reponsible for the those failures. The end result of working through the decision logic is a judgement as to the necessity of performing a maintenance task. In this paper, we provide guiding principles based on IEC 60300-3-11 for RCM analysis methods and operational method of structure and equipment.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.349-354
• /
• 1996

SACOM(Simulation Analyser with Cognitive Operator Model) is being developed at Korea Atomic Energy Research Institute to simulate human operator's cognitive characteristics during the emergency situations of nuclear power plans. An operator model with error mechanisms has been developed and combined into SACOM to simulate human operator's cognitive information process based on the Rasmussen's decision ladder model. The operational logic for five different cognitive activities (Agents), operator's attentional control (Controller), short-term memory (Blackboard), and long-term memory (Knowledge Base) have been developed and implemented on blackboard architecture. A trial simulation with a scenario for emergency operation has been performed to verify the operational logic. It was found that the operator model with error mechanisms is suitable for the simulation of operator's cognitive behavior in emergency situation.

• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.13-26
• /
• 2023

Recently, the development of wireless network technologies has been advancing in several directions: increasing data transmission speed, enhancing user mobility, expanding the range of services offered, improving the utilization of the radio frequency spectrum, and enhancing the intelligence of network and subscriber equipment. In this research, a series of contradictions has emerged in the field of wireless network technologies, with the most acute being the contradiction between the growing demand for wireless communication services (on operational frequencies) and natural limitations of frequency resources, in addition to the contradiction between the expansions of the spectrum of services offered by wireless networks, increased quality requirements, and the use of traditional (outdated) management technologies. One effective method for resolving these contradictions is the application of artificial intelligence elements in wireless telecommunication systems. Thus, the development of technologies for building intelligent (cognitive) radio and cognitive wireless networks is a technological imperative of our time. The functions of artificial intelligence in prospective wireless systems and networks can be implemented in various ways. One of the modern approaches to implementing artificial intelligence functions in cognitive wireless network systems is the application of fuzzy logic and fuzzy processors. In this regard, the work focused on exploring the application of fuzzy logic in prospective cognitive wireless systems is considered relevant.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1471-1480
• /
• 2020

This research presents a case study on the remediation of a radioactive waste (uranium: U) utilizing a multi-objective fuzzy optimization in an electrocoagulation process for the iron-stainless steel and aluminum-stainless steel anode/cathode systems. The incorporation of the cumulative uncertainty of result, operational cost and energy consumption are essential key elements in determining the feasibility of the developed model equations in satisfying specific maximum contaminant level (MCL) required by stringent environmental regulations worldwide. Pareto-optimal solutions showed that the iron system (0 ㎍/L U: 492 USD/g-U) outperformed the aluminum system (96 ㎍/L U: 747 USD/g-U) in terms of the retained uranium concentration and energy consumption. Thus, the iron system was further carried out in a multi-objective analysis due to its feasibility in satisfying various uranium standard regulatory limits. Based on the 30 ㎍/L MCL, the decision-making process via fuzzy logic showed an overall satisfaction of 6.1% at a treatment time and current density of 101.6 min and 59.9 mA/㎠, respectively. The fuzzy optimal solution reveals the following: uranium concentration - 5 ㎍/L, cumulative uncertainty - 25 ㎍/L, energy consumption - 461.7 kWh/g-U and operational cost based on electricity cost in the United States - 60.0 USD/g-U, South Korea - 55.4 USD/g-U and Finland - 78.5 USD/g-U.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.805-812
• /
• 2013

The operational flight program(OFP) which has the functions of I/O processing with avionics, flight control logic calculation, fault diagnosis and redundancy mode is embedded in the flight control computer of Smart UAV. The OFP was developed in the environment of PowerPC 755 processor and VxWorks 5.5 real-time operating system. The OFP consists of memory access module, device I/O signal processing module and flight control logic module, and each module was designed to hierarchical structure. Memory access and signal processing modules were verified from bench test, and flight control logic module was verified from hardware-in-the-loop simulation(HILS) test, ground integration test, tethered test and flight test. This paper describes development environment, software structure, verification and management method of the OFP.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.42-45
• /
• 1986

This paper introduces novel functionally integrated logic elements which are conceptuallized for large scale integrated circuits. Efforts are made to minimize the gate size as well as to reduce the operational voltage, without sacrificing the speed performance of the gates. The process used was a rather conventional collector diffusion isolation(CDI) process. New gate structures are formed by merging several transistors of a gate in the silicon substrate. Thested elements are CML(Current Mode Logic) and EECL (Emitter-to-Emitter Coupled Logic)gates. The obtained experimental results are power-delay product of 6~11pJ and delay time/gate of 1.6~1.8 ns, confirming the possibility of these novel gate structures as a VLSI-candidate.