• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.625-634
• /
• 2016

Three leading agencies under different ministries - Korea Meteorological Administration (KMA) in the ministry of Environment, Han river control office in the Ministry of Land, Infrastructure and Transport (MOLIT) and Weather Group of ROK Air Force in the Ministry of National Defense (MND) - have been operated radars in the purpose of observing weather, hydrology and military operational weather in Korea. Eight S-band dual-pol. radars have been newly installed or replaced by these ministries over different places by 2015. However each ministry has different aims of operating radars, observation strategies, data processing algorithms, etc. Due to the differences, there is a wide level of accuracy on observed radar data as well as the composite images made of the cross governmental radar measurement. Gaining fairly high level of accuracy on radar data obtained by different agencies has been shared as a great concern by the ministries. Thus, "an agreement of harmonizing weather and hydrological radar products" was made by the three ministries in 2010. Particularly, this is very important to produce better rainfall estimation using the cross governmental radar measurement. Weather Radar Center(WRC) in KMA has been developed an empirical method using measurements observed by Yongin testbed radar. This study is aiming to examine the efficiency of the empirical method to improve the accuracies of radar rainfalls estimated from cross governmental dual-pol. radar measurements. As a result, the radar rainfalls of three radars (Baengnyeongdo, Biseulsan, and, Sobaeksan Radar) were shown improvement in accuracy (1-NE) up to 70% using data from May to October in 2015. Also, the range of the accuracies in radar rainfall estimation, which were from 30% to 60% before adjusting polarimetric variables, were decreased from 65% to 70% after adjusting polarimetric variables.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.2
• /
• pp.125-156
• /
• 2009

Objectives : To research the trend of studies related to rheumatoid arthritis and to indicate the hereafter direction for its study in oriental medicine and its treatment. Methods : I reviewed 75 domestic oriental medical journals, and 50 medical journals about rheumatoid arthritis published after 2004, and comparative analysis was made. And these theses were classified by college, year, field of study, subject. Results : The following are the results of this study. 1. Classified by oriental medical college, Dae-jeon college published the most theses, followed by Dong-guk, Kyung-hee, Se-myung and Dong-shin college. Han-yang college published the most theses among college of medicine. 2. Classified by type of thesis, experimental theses(70 pieces, 94%) showed higher rate than that of clinical theses(4 pieces, 5%) in oriental medical studies. However, in medical studies, clinical theses(34 pieces, 68%) showed higher rate than that of experimental theses(15 pieces, 30%). 3. Analyzed by subject, the most dealt subject in oriental medicine was herb medication, followed by herbal acupuncture, single herb, electroacupuncture, sasang & gene, acupuncture & moxibustion, complex accordingly. The most dealt subject in medical clinical journals was standards of diagnosis & prognosis, followed by medication, gene analysis, pathogenesis, clinical pattern, operative treatment and complication accordingly. 4. In theses related to herb medication, most of the subject was to evaluate anti-inflammatory and immunoregulatory effects of herb medication with geopungseup, jibitong, hwalhyeolgeoer function. The tendency of experimental methods was focusing on understanding anti-inflammatory and immunoregulatory mechanisms through molecular biologic methods by analyzing cytokine and gene. 5. Most of theses related to herbal acupuncture were experimental studies verifying ant-inflammatory and immnoregulatory effects through methods observing change of cytokine and immunoregulatory factors. Regarding remedies for herbal acupuncture, Ulmus davidiana Planch was most preferred, followed by bee venom. 6. In theses related to single herb, Boik-yak was most prefered, followed by Geopungseup-yak and Hwalhyeolgeoer-yak. Regarding methods of research, there were tendency of shifting from methods verifying travail, anti-inflammatory and anti-pyretic effects through a test of behavior, morphometry, serology and temperature measurement of the rectum and the skin into verifying anti-inflammatory and immunoregulatory effects through observing inflammatory cytokine in the joint and cells of spleen. 7. In theses related to electroacupuncture, ST36 and adjuvant were most preferred as acupoints and induced factor. The tendency of experimental methods was turning from verifying mechanism of travail effect to analyzing inflammation and pain inducing factors. 8. Diverse medical clinical studies were published. Subjects such as diagnosis and prognosis, medication, gene analysis, clinical pattern, operational treatment, complication and pathogenesis were published. Especially, studies about standards of early diagnosis, and research on possible parallel medications with methotrexate were actively inquired. 9. Most of theses related to medical experimental studies was about mediators and receptors related to inflammatory induction and osteoclasia mechanism. Also, it was presented blockage of them can be effective on rheumatoid arthritis. Conclusions : The oriental medicine studies have merit in its diversity of treatment, but it clinical studies is lacking compared to experimental studies. Also, more diversity of subjects is necessary. Therefore, complementary measures are needed. Hereafter, oriental medicine research about rheumatoid arthritis needs more clinical research verifying the effectiveness and safety in clinical field. Also, we require oriental medical standard of diagnosis and researches on pathological generation which would make early checkup and prognosis possible.

• Journal of Technology Innovation
• /
• v.31 no.3
• /
• pp.39-73
• /
• 2023

The field of Management of Technology(MOT) emerged in response to the need for research management within U.S. public research institutions during the 1960s. Since its inception, it has proliferated significantly, being practiced in more than 809 institutions globally and over 19 institutions in Korea, encompassing both research and educational endeavors. Particularly noteworthy is the substantial investment of government resources, primarily channeled through the Ministry of Industry since 2007, which has expeditiously established a comprehensive framework for cultivating graduate-level MOT expertise, marked by both quantitative and qualitative advancements. The educational curriculum in the realm of Korean MOT deviates from foreign counterparts through distinctive pathways, exemplified by its emphasis on industry practice-oriented educational programs, standardization and isomorphism across different schools, as well as its interconnectedness with proximate academic disciplines. This research systematically undertakes an analysis of the curriculum in Korean MOT graduate schools, thereby ascertaining its intrinsic identity and distinct attributes. In this endeavor, a comprehensive examination of eleven principal MOT textbooks(three in Korean and eight in English) is conducted to delineate the primary content of the curriculum across seven thematic domains. Moreover, the study deliberates on its differentiation from neighboring academic disciplines and the definitional attributes of MOT. Subsequently, this analysis also encompasses nine Korean MOT graduate programs, projecting the seven thematic domains onto their respective curricula. The findings illuminate that within the context of Korean graduate programs, a substantial proportion of the curriculum, amounting to 62.5%, is dedicated to facets encompassing the operational aspects of technology management within corporate contexts, technology management specific to varying industries and technologies, and collaborative endeavors between academia and industry in the form of projects and seminars. Evidently, the Korean approach to technology management education is notably geared towards the cultivation of adept practitioners capable of executing technology management functions at a mid-tier managerial level, aligned with the exigencies of regional industries. Grounded in the analysis of technology management curricula, this study extrapolates implications for the future trajectory of MOT education in Korea, encompassing a consideration of the stages of industrial development. It underscores the necessity to augment the educational curricula pertaining conceptual foundation of technology and innovation, strategic perspectives of technology and innovation, and the socio-economic context of technology management.

• Asia pacific journal of information systems
• /
• v.22 no.3
• /
• pp.99-124
• /
• 2012

Our society has long been talking about necessity for innovation. Since companies in particular need to carry out business innovation in their overall processes, they have attempted to apply many innovation factors on sites and become to pay more attention to their innovation. In order to achieve this goal, companies has applied various information technologies (IT) on sites as a means of innovation, and consequently IT have been greatly developed. It is natural for the field of IT to have faced another revolution which is called cloud computing, which is expected to result in innovative changes in software application via the Internet, data storing, the use of devices, and their operations. As a vehicle of innovation, cloud computing is expected to lead the changes and advancement of our society and the business world. Although many scholars have researched on a variety of topics regarding the innovation via IT, few studies have dealt with the issue of could computing as IT. Thus, the purpose of this paper is to set the variables of innovation attributes based on the previous articles as the characteristic variables and clarify how these variables affect "Performance Expectancy" of companies and the intention of using cloud computing. The result from the analysis of data collected in this study is as follows. The study utilized a research model developed on the innovation diffusion theory to identify influences on the adaptation and spreading IT for cloud computing services. Second, this study summarized the characteristics of cloud computing services as a new concept that introduces innovation at its early stage of adaptation for companies. Third, a theoretical model is provided that relates to the future innovation by suggesting variables for innovation characteristics to adopt cloud computing services. Finally, this study identified the factors affecting expectation and the intention to use the cloud computing service for the companies that consider adopting the cloud computing service. As the parameter and dependent variable respectively, the study deploys the independent variables that are aligned with the characteristics of the cloud computing services based on the innovation diffusion model, and utilizes the expectation for performance and Intention to Use based on the UTAUT theory. Independent variables for the research model include Relative Advantage, Complexity, Compatibility, Cost Saving, Trialability, and Observability. In addition, 'Acceptance for Adaptation' is applied as an adjustment variable to verify the influences on the expected performances from the cloud computing service. The validity of the research model was secured by performing factor analysis and reliability analysis. After confirmatory factor analysis is conducted using AMOS 7.0, the 20 hypotheses are verified through the analysis of the structural equation model, accepting 12 hypotheses among 20. For example, Relative Advantage turned out to have the positive effect both on Individual Performance and on Strategic Performance from the verification of hypothesis, while it showed meaningful correlation to affect Intention to Use directly. This indicates that many articles on the diffusion related Relative Advantage as the most important factor to predict the rate to accept innovation. From the viewpoint of the influence on Performance Expectancy among Compatibility and Cost Saving, Compatibility has the positive effect on both Individual Performance and on Strategic Performance, while it showed meaningful correlation with Intention to Use. However, the topic of the cloud computing service has become a strategic issue for adoption in companies, Cost Saving turns out to affect Individual Performance without a significant influence on Intention to Use. This indicates that companies expect practical performances such as time and cost saving and financial improvements through the adoption of the cloud computing service in the environment of the budget squeezing from the global economic crisis from 2008. Likewise, this positively affects the strategic performance in companies. In terms of effects, Trialability is proved to give no effects on Performance Expectancy. This indicates that the participants of the survey are willing to afford the risk from the high uncertainty caused by innovation, because they positively pursue information about new ideas as innovators and early adopter. In addition, they believe it is unnecessary to test the cloud computing service before the adoption, because there are various types of the cloud computing service. However, Observability positively affected both Individual Performance and Strategic Performance. It also showed meaningful correlation with Intention to Use. From the analysis of the direct effects on Intention to Use by innovative characteristics for the cloud computing service except the parameters, the innovative characteristics for the cloud computing service showed the positive influence on Relative Advantage, Compatibility and Observability while Complexity, Cost saving and the likelihood for the attempt did not affect Intention to Use. While the practical verification that was believed to be the most important factor on Performance Expectancy by characteristics for cloud computing service, Relative Advantage, Compatibility and Observability showed significant correlation with the various causes and effect analysis. Cost Saving showed a significant relation with Strategic Performance in companies, which indicates that the cost to build and operate IT is the burden of the management. Thus, the cloud computing service reflected the expectation as an alternative to reduce the investment and operational cost for IT infrastructure due to the recent economic crisis. The cloud computing service is not pervasive in the business world, but it is rapidly spreading all over the world, because of its inherited merits and benefits. Moreover, results of this research regarding the diffusion innovation are more or less different from those of the existing articles. This seems to be caused by the fact that the cloud computing service has a strong innovative factor that results in a new paradigm shift while most IT that are based on the theory of innovation diffusion are limited to companies and organizations. In addition, the participants in this study are believed to play an important role as innovators and early adapters to introduce the cloud computing service and to have competency to afford higher uncertainty for innovation. In conclusion, the introduction of the cloud computing service is a critical issue in the business world.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.202-210
• /
• 2013

As incomes increase, interest in ocean leisure picks up. As a result, a lot of research and developments on hull form design and production of planing boats, mostly used for ocean leisure, are needed. Analysis in researches on resistance of planing boats shows that resistance characteristic of planing boats is different from resistance characteristic of general boats because the former is fast, and its wetted surface is very small. Using Savitsky formula widely used in the calculation of effective horse power in shipbuildingyards, and propulsion system and engine manufacturers, this study calculated total resistance of a research planing boat. Then it analyzed the flow characteristics of the planing boat through theoretical analysis and wind tunnel experiment, and computed air resistance and lift force by changes of speed and trim angle. It also compared and analyzed result of theoretical analysis and experiment of the ratio of air resistance to total resistance under variations of velocity and trim angle. When the study is used to estimate more accurate effective horse power, it is expected to remedy abuses of unnecessarily installing high-powered engine. As nature disasters due to abnormal changes of weather increase, interest in greenhouse gas grows. International Maritime Organization (IMO) legislated Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI) to reduce ship greenhouse gas emissions. But this index will be applied to over 400 tons ships, small ships, emitting more greenhouse gases than larege ships per unit power, will dodge the regulations. Thus, this study indicated a problem by calculating greenhouse gas emissions of an ocean leisure planning boat (a small ship), and suggested the need for EEDI of small ships.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1181-1191
• /
• 2013

This study have implemented finding the optimal water temperature parameter set for Hapcheon dam reservoir using CE-QUAL-W2 model. In particular the sensitivity analysis was carried out for four water temperature parameters of wind sheltering coefficient (WSC), radiation heat coefficient (BETA), light extinction coefficient (EXH2O), heat exchange coefficient at the channel bed (CBHE). Firstly, WSC, BETA, EXH2O shows relatively high sensitivity in common during April to September, and CBHE does during August to November. Secondly, as a result of identifying depth range of parameter influence, BETA and EXH2O show 0~9 m and 8~14 m which is thermocline layer close to water surface, CBHE is deep layer 12 m away from bottom. Finally, applying annual or monthly optimal parameter sets indicates that the bias between two sets does not show much differences for WSC and CBHE parameters, but BETA and EXH2O parameters show $0.20^{\circ}C$ and $0.51^{\circ}C$ of monthly average biases for two parameter sets. In particular the bias reveals to be $0.4^{\circ}C$ and $1.09^{\circ}C$ during May and August that confirms the necessity of use of monthly parameters during that season. It is claimed that the current operational custom use of annual parameters in calibration of reservoir water quality model requires the improvement of using monthly parameters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.162-171
• /
• 2014

As the foodservice industry is labor intensive, the efficient management of human resources is an essential element for improving operational efficiency. This study was designed to investigate the performance level of human resource management in self-operated school foodservices and to examine the relationship between human resource management, organizational commitment, and productivity. Whether these factors rated differently by employment and job types was also examined. Data were collected through questionnaires distributed to 60 dieticians and 240 cooks in Seongnam and Yongin. Frequency analysis, factor analysis, the t-test and multiple regression analysis were tested using Minitab. Human resource management practices rated highly in the dimension of employee training (3.51), followed by working environment (3.39), and turnover management (3.37). In contrast, reward management (1.73) and working condition (1.56) received the lowest score. Organizational commitment scored 3.65 points, and showed that dedication (3.82) was the highest score; however, self-esteem (3.50) was the lowest score. For human resource management, there were significant differences between employment types as full time workers (3.85) rated management more highly than part-time worker (3.43). Overall productivity was fairly high, especially in high school foodservices. Only the performance appraisal had an influence on organizational commitment (${\beta}$=0.292, P<0.05). Productivity was positively correlated with human resource management (r=0.432, P<0.001) and organizational commitment (r=0.36, P<0.01). In conclusion, school foodservices need to establish objective performance standards, and increase employee morale by enhancing reward systems and working conditions. In particular, irregular employees require training with job performance standards and given a proper reward program, depending on their performance, to improve organizational commitment.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.119-129
• /
• 2009

Building construction trends have been changed dramatically in terms of size and mass. With the need to maximize land usage, there has been an increase in the construction of high-rise buildings. This affects not only the entire construction duration and cost, but also subsequent construction activities, such as work to increase underground facilities and in reclamation land area construction. These types of site conditions require soft ground reinforcement and the proper uplift water pressure treatment. In general, two kinds of methods have been used for uplift water pressure treatment systems. However, there have been some problems arising as the result of a lack of research and analysis on underground construction techniques, and a reliance on experiments over actual survey and analysis of site conditions. This paper focused on the problems of conventional selection procedure, by analyzing drawings and proposing a kind of modeling for a reasonable procedure. The results were applied to OO project as a sample construction case to be verified in this research. The initial plan in the case project was the Rock Anchor System. However, as there were terrible miscalculations of basic site conditions that had an extraordinary influence on the underground water level, such as the site's proximity to the Han-river, it was necessary to change the plan to include apermanent drainage system. This achieved a direct construction cost reduction \ 406,702,000 and a maximum sayings of 4% of operational cost, based on the 50-year building Life Cycle Cost.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.53-68
• /
• 1998

Observation of hydrometeors' behavior in the atmosphere is important to understand weather and climate. By conventional observations, we can get the distribution of water vapor at limited number of points on the earth. In this study, the precipitable water has been estimated from the split window channel data on GMS-5 based upon the technique developed by Chesters et al.(1983). To retrieve the precipitable water, water vapor absorption parameter depending on filter function of sensor has been derived using the regression analysis between the split window channel data and the radiosonde data observed at Osan, Pohang, Kwangiu and Cheju staions for 4 months. The air temperature of 700 hPa from the Global Spectral Model of Korea Meteorological Administration (GSM/KMA) has been used as mean air temperature for single layer radiation model. The retrieved precipitable water for the period from August 1996 through December 1996 are compared to radiosonde data. It is shown that the root mean square differences between radiosonde observations and the GMS-5 retrievals range from 0.65 g/$cm^2$ to 1.09 g/$cm^2$ with correlation coefficient of 0.46 on hourly basis. The monthly distribution of precipitable water from GMS-5 shows almost good representation in large scale. Precipitable water is produced 4 times a day at Korea Meteorological Administration in the form of grid point data with 0.5 degree lat./lon. resolution. The data can be used in the objective analysis for numerical weather prediction and to increase the accuracy of humidity analysis especially under clear sky condition. And also, the data is a useful complement to existing data set for climatological research. But it is necessary to get higher correlation between radiosonde observations and the GMS-5 retrievals for operational applications.