• Journal of Environmental Science International
• /
• v.19 no.5
• /
• pp.591-605
• /
• 2010

This study were to simulate major criteria air pollutants and estimate regional source-receptor relationship using air quality prediction model (TAPM ; The Air Pollution Model) in the Seoul Metropolitan area. Source-receptor relationship was estimated by contribution of each region to other regions and region itself through dividing the Seoul metropolitan area into five regions. According to administrative boundary, region I and region II were Seoul and Incheon in order. Gyeonggi was divided into three regions by directions like southern(region III), northern(IV) and eastern(V) area. Gridded emissions ($1km{\times}1km$) by Clean Air Pollicy Support System (CAPSS) of National Institute of Environmental Research (NIER) was prepared for TAPM simulation. The operational weather prediction system, Regional Data Assimilation and Prediction System (RDAPS) operated by the Korean Meteorology Administration (KMA) was used for the regional weather forecasting with 30km grid resolution. Modeling period was 5 continuous days for each season with non-precipitation. The results showed that region I was the most air-polluted area and it was 3~4 times more polluted region than other regions for $NO_2$, $SO_2$ and PM10. Contributions of $SO_2$ $NO_2$ and PM10 to region I, II and III were more than 50 percent for their own sources. However region IV and V were mostly affected by sources of region I, II and III. When emissions of all regions were assumed to reduce 10 and 20 percent separately, air pollution of each region was reduced linearly and the contributions of reduction scenario were similar to those of base case. As input emissions were reduced according to different ratio - region I 40 percent, region II and III 20 percent, region IV and V 10 percent, air pollutions of region I and III were decreased remarkably. The contributions to region I, II, III were also reduced for their own sources. However, region I, II and III affected more regions IV and V. Shortly, graded reduction of emission could be more effective to control air pollution in emission imbalanced area.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.8-15
• /
• 2016

The purpose of this study is to design a model with the structural stability so as not to lose the operational function due to structural plastic or fail of a sliding blast door by blast pressure to this aim, a numerical simulation was performed using full-size experiments and M&S (Modeling & Simulation) of the sliding blast door. The sliding blast door ($W3,000{\times}H2,500mm$) under the blast load is in the form of a sliding type 2-way metal grill, which was applied by a design blast pressure (reflected pressure $P_r$) of 17 bar. According to the experimental results of a real sliding blast door under blast load, the blast pressure reached the sliding blast door approximately 4.3 ms after the explosion and lasted about 4.0 ms thereafter. The maximum blast pressure($P_r$) was 347.7 psi (2,397.3 kPa), it is similar to the UFC 3-340-02 of Parameter(91 %). In addition, operation inspection that was conducted for the sliding blast door after real test showed a problem of losing the door opening function, which was because of the fail of the Reversal Bolt that was installed to prevent the shock due to rebound of the blast door from the blast pressure. According to the reproduction of the experiment through M&S by applying the blast pressure measurement value of the full-size experiments, the sliding blast door showed a similar result to the full-size experiment in that the reversal bolt part failed to lose the function. In addition, as the pressure is concentrated on the failed reversal bolt, the Principal Tensile Failure Stress was exceeded in only 1.25 ms after the explosion, and the reversal bolt completely failed after 5.4 ms. Based on the result of the failed reversal bolt through the full-size experiment and M&S, the shape and size of the bolts were changed to re-design the M&S and re-analyze the sliding blast door. According to the M&S re-analysis result when the reversal bolt was designed in a square of 25 mm ($625mm^2$), the maximum pressure that the reversal bolt receives showed 81% of the principal tensile failure stress of the material, in plastic stage before fail.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.223-230
• /
• 2003

KCTA(Korea Container Terminal Authority) is going to introduce automated operating system in the port of Gwangyang container terminal to enhance the efficiency. Prior to developing the container terminal, defining the objective of container terminal operation is essential. This research used AHP technique to define the operation objective of automated container terminal objectively, and the questionnaire to collect the opinions of future customer, operator and research institution. The objectives mix of the automated container terminal are composed of the minimization of initial investments, the minimization of operational expenses, the performance of automation system, the raising of operation efficiency and productivity and the improvement of customer service. The result of the analysis revealed that most important factor among objectives mix was “the minimization of operation expense”. Especially, the user group preferred to select the factor of “the improvement of customer service”as objective rather than select other objectives. The result of this research will suggest some guidelines for deciding the level of investment of terminal construction. information system, automation equipment, terminal worker and etc., which are to be considered in terminal development and the system development hereafter.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.35-50
• /
• 1997

The purpose of this research seeks to analyze the spatial variations in the sex age structure which have been shown to exist within the study atrea, the Kyonggi province in Korea. In this study it is desired to use the Age Structure Index developed by Coulson in order to describe thi sex age structure of each of 186 tracts that comprise the tracted portion of the Kyonggi province. The mechanics of computing the Age Structure Index are found in the equation describing a linear least squares trend line: y=a+bx. For each census tract, the percentage of the population in each age group(y) was plotted against the middle age of each age group(x). The a is a constant representing the value of y, when x equals zero. The b is the regression coefficient and is a measure of the angle of the slope of the least squares trend line. Thus the value of b is the Age Structure Index for each census tract. The major results of this investigation can be summarized as follows: The spatial distributions of sex age structures in the Kyonggi province are far from random. They have exhibited great regularity with the yonger sex age structures near Seoul and a sharp decline to the older sex age structures out in all derections towards rural region. The results of this investigation should have important general significance for the study of the Kyonggi province Age Structure Index is a flexible, operational definition shich allows sex age structure to be measured, mapped, and incorporated in a wide variety of methods of statistical analysis. Futurer, it has been demonstrated that sex age structure varies spatially within Seoul metropolitan finge and that this variation is relagfed to many other attributes of the population. Especially, Age Structure Index is strongly related to the variables-rate of population growth rate. density, rate of numbers of manufacturing, land price. At the same time, considerably more research is needed before a genmeral body of knowlege concerning sex age structure can be developed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.1
• /
• pp.56-67
• /
• 1999

It is desired to use a domestically manufactured ocean data buoy for the long-term operational ocean monitoring. The ocean data buoy manufacturing technology was introduced through the research cooperation with the Qingkong University of Taiwan. The introduced ocean data buoy system was further expanded and improved for more efficient application for the marine environmental monitoring in Korea. The size of the ocean data buoy is 2.5 m in diameter, which is smaller compared to the NOAA's 3.0 m discus buoy to allow easy land transportation and ocean deployment as well. From the dynamic response test of the buoy carried out numerically, it was shown that the measurement of waves with period greater than 4 seconds is acceptable. The measurement and control system of the data buoy were improved to increase the number of measuring parameters, to reduce power consumption and to enhance better data analysis and management. Each component of the improved data buoy system was described in detail in this paper. Water quality sensors of water temperature, salinity, DO, pH and turbidity were added to the system in addition to the marine meteorological sensors of wind speed and direction, air temperature, humidity, air pressure and wave. Inmarsat satellite communication system is used for the real-time data telemetry from the buoy deployed offshore. A field performance test of the improved and domestically manufactured buoy was carried out for a month at the open sea off Pohang together with DatawelI's Wave-rider buoy to compare the wave data. The results of the test were satisfactory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.405-414
• /
• 2017

In this study, a survey for a satisfaction evaluation of the Test Report Information Service (TRIS) was conducted. A survey questionnaire on modified Information System Success Model(ISSM) of Delone and Mclean was carried out by 183 users in three groups, such as munition quality assurance agency, munition corporation, and test institute. As a survey result, training on the TRIS was in strong demand in all three groups. An understanding and proficiency of the overall system were different from the work process of each user group. In addition, the munition quality assurance agency needs to enhance the system function with its characteristics. Test institute has necessity of the linkage method with the TRIS depending on the authentication system. User groups are different in the operational method of TRIS between the contractor and cooperation. Accordingly, cooperation needs to be educated continually. This study can help in the construction of a Military Quality Integration Information System to secure the reliability of munitions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4125-4130
• /
• 2015

This paper presents the communication performance for the radiation pattern reconfigurable antenna in the wearable device measuring bio signal (temperature, blood pressure, pulse etc.) of human body. The operational frequency is 2.4 - 2.5 GHz, which covers Bluetooth communication bandwidth. The maximum gain of the antennas is 1.96 dBi. The proposed antenna is efficiently transmitting and receiving signal by generating two opposite beam directions using two RF switches (PIN diode). Also, we investigated how radiation pattern changes according to three angles ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$) of Top Loading. In this paper, we measured and compared the SNR (Signal-to-Noise Ratio) and BER (Bit Error Rate) performances of the proposed antennas in the condition between an ideal environment of anechoic chamber and smart house existing practical electromagnetic interferences (Universal Software Radio Peripheral, USRP). Throughout the comparing the results of the measurement of two cases, we found that the SNR is degraded over 5dB in average and BER is increased over ten times in maximum, therefore, it is confirmed that the error rate of receiving signal is increased. The measured results of SNR and BER value in this paper able to expect the performance degrading by the interference from the electromagnetic devices.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.150-158
• /
• 2010

The operational characteristics of a resonant DC/DC converter, which can harvest thermoelectric energy, is analyzed, depending on the relative magnitudes of the input voltage and the load voltage. The resonant converter consists of LC resonant circuit connected to DC input source and a resonant pulse converter in which the input energy is transferred to the load as the resonant capacitor voltage is peak. The resonant capacitor doubles the input voltage by the resonance phenomenon. By the relative magnitude between the input voltage and the output voltage, the resonant DC/DC converter operates in three different modes. For boost mode, the peak voltage of the resonant capacitor is smaller than the load voltage. For hybrid mode, the peak voltage of the resonant capacitor is bigger than the load voltage and every switching period has both the boost mode and the direct mode. For the direct mode, the input voltage is bigger than the load voltage and the converter transfers directly the input energy to the load without the switching operation. Operation principles and the feasibility of the converter for the thermoelectric energy harvesting are verified with PSPICE simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.103-110
• /
• 2010

In this paper, a new mode changeable asymmetric full bridge dc/dc converter is proposed to solve the freewheeling current problem of the conventional zero voltage switching(ZVS) phase shift full bridge(PSFB) dc/dc converter of low output voltage and high output current applications. The proposed converter is operated as an asymmetric full bridge converter when the duty cycle is less than 50% and active clamp full bridge converter when the duty cycle is greater than 50%. As a result, since its freewheeling current is eliminated, the conduction loss is lower than that of the conventional ZVS PSFB dc/dc converter. Moreover, ZVS of all power switches can be ensured along a wide load ranges and output current ripple is very small. Therefore, high efficiency of the proposed converter can be achieved. Especially since its operation mode is changed to the active clamp full bridge converter during hold up time and can be operated with 50~100% duty ratio, it can produce the stable output voltage along wide input voltage range. The operational principles, theoretical analysis and design considerations are presented. To confirm the operation, validity and features of the proposed converter, experimental results from a 1.2kW($400V_{dc}/12V_{dc}$) prototype are presented.

• Journal of the Korean Geographical Society
• /
• v.41 no.4 s.115
• /
• pp.491-506
• /
• 2006

In terms of the importance of ocean as a present and future resource and the Korean peninsular location, it is strongly urged to develop renewed recognition and educational programs on ocean, so as to respond properly to the newly emerging political changes surrounding the country. By setting up the purpose of marine education as engendering greater interests in and knowledge of ocean, this research suggests that the frame of marine education can be founded appropriately on four educational sub-categories: humanity education, territory education, economy education, and resources and environment education. At an operational scale, this paper particularly analyzed ocean- related contents in the 7th national curriculum in order to find substantial ways for strengthening marine education. The study simultaneously compared the result of content analysis with the curriculum of marine education in other countries, and founded that explicit ocean-related contents in the 7th curriculum were significantly limited. Yet, the study alternatively points out that it is possible to use a variety of teaching materials and apply them for writing textbooks or developing teaching-teaming curriculum. I provide some of the ways for strengthening marine education by using marine-related themes in the curriculum of geography education. Marine is not simply one of the key elements in the discipline of geography. But, more importantly, I suggest that geography is particularly useful in developing various and familiar themes such as swimming beach, fishing villages, ports, marine-bound industrial district and port cities into teaching materials.