• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.44-50
• /
• 2012

The reliability qualification test is essential in order to ensure the life time of the product under the normal operation conditions when a new product is developed. The reliability qualification test period has an important impact on the development time of new product. Therefore, some researches to reduce the test time of reliability qualification test have been actively studied. Generally, accelerated life test is well known as one method that can save the test time of the reliability qualification test. This test is conducted under the higher stress condition than normal condition. So we need to investigate what factor affects to the higher stress condition. This paper shows the relationship between the acceleration factor and reliability qualification test period. Especially, we focused on the method to obtain effective acceleration factors under the high temperature condition. Through some experiments for a refrigerator's compressor, we were able to confirm how to increase acceleration factors and how to reduce the reliability qualification test period with minimum samples.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.8
• /
• pp.401-410
• /
• 2017

This paper proposes a method to generate test cases in an automatic manner, based on checklist containing test cases used for testing embedded systems. In general, the items to be tested are defined in a checklist. However, most test case generation strategies recommend to test a system with not only the defined test items but also various mutated test conditions. The proposed method parses checklist in Korean file and figures out the system inputs and outputs, and operation information. With the found information and the user defined test case generation strategy, the test cases are automatically generated. With the proposed method, the errors introduced during manual test case generation may be reduced and various test cases not defined in checklist can be generated. The proposed method is implemented and the experiment is performed with the checklist for an medical embedded system. The feasibility of the proposed method is shown through the test cases generated from the checklist. The test cases are adequate to the coverages and their statistics are correct.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.13-21
• /
• 2010

IEEE 1149.1 test architecture was proposed to support the test of elements within the boards. It is a large serial shift register that uses the TDI pin as an input and the TDO pin as an output. Even though it performs the board level test perfectly, there is a problems of running system level test when the boards are equipped to the system. To test real time operation signal on test pin, output speed of serial shift register chain must be above double clock speed of shift register. In this paper, we designed a runtime test architecture and a runtime test procedure under running system environments to capture runtime signal at system clock rate. The suggested runtime test architecture are simulated by Altera Max+Plus 10.0. through the runtime test procedure. The simulation results show that operations of the suggested runtime test architecture are very accurate.

• School Mathematics
• /
• v.19 no.1
• /
• pp.59-75
• /
• 2017

This study analyzed the $6^{th}$ graders' constructions about fraction operations and schemes and figured out the relationships quantitatively between operations and schemes through the written test of 432 students. The results of this study showed that most of students could do partitioning operation well, however, there were many students who had difficulties on iterating operation. There were more students who constructed partitioning operation prior to iterating operation than the opposite. The rate of students who constructed high schemes was lower than that of students who constructed low schemes according to the hierarchy of fraction schemes. Especially, there were many students who construct partitive unit fraction scheme but not partitive fraction scheme, because they could compose unit fraction but not do iterating it. And there were the high correlations between fraction operations and schemes. Given these result, this paper suggests implications about the teaching and learning of fraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.148-156
• /
• 2007

Purpose: The aim of this study is the changes of upper respiratory airway space in patients with mandibular prognathism after 2-jaw orthognathic surgery in patients with skeletal classs III malocclusion. Method: We measured the lines between selected upper airway landmarks on lateral cephalometric x-ray films of skeletal class III 64 persons who had not been operated yet, were 6 months after operation. The test subjects were divided into 3 groups according to maxillary movement, as follows; maxillary advancement (MA) group, maxillary posterior impaction (MPI) group, maxillary posterior impaction and superior repositioning (MPI+MSR) group. Result: In this study, nasopharyngeal airway space in MPI+MSR group was significantly increased after operation (p<0.05). Oropharygeal and hypopharyngeal airway space in MA group and MPI group were significantly decreased after operation (p<0.05). From hyoid bone to anterior mandible point distance in MA group and MPI group were significantly decreased after operation (p<0.05). Conclusion: Oropharygeal and hypopharyngeal airway space were influenced more by mandibular set-back than maxillary movement. Maxillary movement surgery as well as mandibular setback surgery should be taken into consideration in order to minimize symptoms related to obstructive sleep apnea syndrome after operation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.1
• /
• pp.32-45
• /
• 1995

This study was intended to evaluate condyle position and the relationship of condyle position change and post surgical relapse following the sagittal split ramus osteotomy for mandible setback in 25 patients by paired t-test and multiple regression analysis. We used oblique transcranial and cephalometric radiographs taken before operation, immediate after operation, and at least 6 months post operatively. 1. In oblique transcranial view, posterior joint space was decreased immediate after operation and increased 6 months after operation. To compare the measurement before and 6 months after operation, there was no statistically significant change in over all joint spaces(P>0.05). 2. The joint spaces changed under the 0.2mm were 30%, 0.2mm to 1.0mm were 60.7%, above 1.0mm were 9.3%. This result reveals that condyle position was relatively reproduced to pre-operative state. 3. Statistically, the amount of mandible set back didn't influence the post operative relapse(P>0.05). 4. Statistically, the amount of mandible set back didn't influence the condylar displacement(P>0.05), and the amount of joint space change didn't influence the post operative relapse.(P>0.05) The changes in joint space is in the standard tracing error or within the adaptive capacity of the individual, it was too small to influence the stability of surgery.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.581-589
• /
• 2013

Generally, Sewage Treatment Plants(STPs) are complexes systems in which a range of physical, chemical and biological processes occur. However, their performance strongly depends on the know-how acquired by the field-engineer. Recently, in order to solve this situations, various operation and management technologies based on the Instrumentation, Control and Automation(ICA) have been developed. As a economies-environmental affect point of view, this study was for the performance evaluation and assessment of results from the Smart Operation System(SOS) in full-scale STP. The SOS in STP consisted of the process monitoring module, including real-time influent prediction and effluent simulation, and the Smart Air Control(SAC) module. According to the results from field test for 2 years, the results of economical evaluation, amount of benefits and cost saving by the SOS have shown to be much higher than that of traditional operation. Nevertheless, the removal load(kg/yr) of BOD 13.3 %, COD 28.2 %, TN 44.4 % and TP 20.8 % were increased, respectively. Remarkable improvement of removal load could be achieved after the SOS was adapted. It was concerned that the SOS offer a user friendly functionalities and cost saving needed by the field-engineers. In addition, it was expected that the results of this study would supply helpful information for design and cost saving for the SOS in full-scale STP.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.475-482
• /
• 2014

The precision hydraulic valve is widely used in various industrial field like aircraft, automobile, and general machinery. Servo actuator is the most important device for driving the precise hydraulic valve. The reliable operation of servo actuator effects on the overall hydraulic system. The performance of servo actuator relies on frequency response and step response according to arbitrary input signal. In this paper, we performed the analysis for the components of servo actuator to satisfy the reliable operation and response characteristics through the reliability analysis, and also induced the design parameters to realize the reliable operation and fast response characteristics of servo actuator for hydraulic valve operation through the empirical knowledge of experts and electromagnetic theories. We suggested the design equations to determine the values of design parameters of servo actuator as like bobbin size, length of yoke and plunger and turn number of coil, and verified the achieved design values through FEM analysis and performance tests using some prototypes of servo actuators adapted in hydraulic valve.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.34-39
• /
• 2018

In this study, the experiment conditions for the variation of heat release rate in compartment space were constructed to analyze the effects of fire spread and the operation time of sprinkler in accordance with the heat loss of the sprinkler's heat element. The compartment composed of fire board (width = 0.3 m, height = 0.5 m, length = 3.0 m), are manufactured to measure the temperature distributions in the inner space, the mass loss rate and heat release rate during the experiment of N-heptane pool fire test. Also, the operation time of sprinkler is analyzed with the installation of sprinkler and C-factor using Fire Dynamics Simulator Ver.6 under the experiment conditions. The results show that the operation time of sprinkler, which has RTI $100(m{\cdot}s)^{0.5}$ operating temperature $70^{\circ}C$, is 30 s~60 s for C-factor = 0 and 1, 62 s~92 s for C-factor = 3, and 120 s over for C-factor = 5, respectively.

• Journal of Service Research and Studies
• /
• v.8 no.2
• /
• pp.41-65
• /
• 2018

With the dawn of society where individuals or enterprises based on data generate infinite profits, the significance of database operation management is growing centering on data quality. However, there are not many South Korean public or private entities managing them systematically. Against this backdrop, this study sought to investigate the current status and problems and explore how to improve from the perspective of auditors. To implement this study, audit checklist was improved and, based on it, auditors and IT experts were surveyed. The final data were analyzed to test the study hypotheses empirically. As a result of the analysis, it was found that the auditors had been highly satisfied with all of the items on the improved audit checklist for data quality-based database operation management. Moreover, non-auditors were also found to regard them within their acceptable range. This study is expected to help improve information system operation audit and enterprises data operation management.