• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.365-369
• /
• 2008

This study analyzed the incidence of wound infection after the operation of mandibular third molar extraction in relation with antibiotic prophylaxis with the object of young and healthy patients. The study object was 1,177 mandibular third molars of 850 men of 20 to 25 years old without any specific systemic disease. Three methods of preventive antibiotic medication were selected according to the preventive antibiotic medication previously reported; three experimental groups were selected based on them, and the antibiotic used was amoxicillin($^{(R)}Kymoxin$, Yuhanyanghaeng, Seoul). The group 1 includes the patients that took the antibiotic orally before the operation(one hour earlier, 500mg) and for three days after the operation(250mg per time, three times/day), the group 2 is the ones that took the same antibiotic orally only once about one hour before the operation(500mg), and the group 3 did not take any antibiotics before and after the operation. And to compare the difficulties and the degrees of extraction during operations which can be possibly related to the wound infection after the operations, the mandibular third molars' impacted depths and extraction methods were investigated as well. To check if the wound was infected, observations with an internal of one week were performed twice after the operation, and the meaningfulness of the infection incidence was verified through Chi-square test using SPSS program(SPSS Inc., IL, USA). There was no statistically significant difference between the antibiotic medication methods and the wound infection incidence after the operation among the experimental groups. As examining the relations between the mandibular third molar operation methods and the wound infection incidence after the operation, there existed a statistically meaningful difference in the infection incidence according to the operation methods(p=0.020). And there was no statistically significant difference in the wound infection incidence according to the impacted depth of the mandibular third molar. Therefore, it is thought that there exists little necessity of prophylatic antibiotics medication when extracting the mandibular third molar of young and healthy men without any systemic disease in general; however, in case when it is expected that the possibility of infection will be high or the wound on the tissue will be severe, it is sure that the prophylactic antibiotics medication will be necessary.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.7-16
• /
• 2011

This is a study on operation system's application method for leading-in public bike operation system through researching on case study at home and abroad, and situation research in Naju city. In the 1st research, studied about the main problems showed at application cases of public bike system at domestic and overseas, such as using time, danger for be stolen and damaged. 2nd research focuses on necessarily of leading-in operation system to be used easily by city residents and travelers of Naju City which is the scheduled city for leading-in public bike system. 3rd research is on the basis of the result showed in 1st and 2nd research, supplied some problems' solving method for France Veblib System, such as lending and rental process using mobile, system operation process, communication process. Also, supplied the application method for problems showed at 1st and 2nd research and civil service proposal. The leading-in method study on public bike operation system was done through above research, also case study at home and abroad, situation study, and rental program module development, and this operation system is worked as an model operation system in Naju City. The future study of leading-in operation system will be more effective by means of summing up test running result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2393-2400
• /
• 2013

This research presents an experimental study of heat exchange rate of U, W, 2U and coil type ground heat exchangers (GHEs) measured by thermal performance tests (TPTs). The four types of GHEs were installed in a partially saturated dredged soil deposit of Incheon International Airport area. Thermal response tests (TRTs) were conducted for U, W and 2U type GHEs to deduce the ground thermal conductivity. Besides, TPTs were also conducted for U, W, 2U and coil type GHEs to evaluate heat exchanger rates under 100-hr continuous and 8-hr intermittent operation conditions for five days. Coil shaped GHE showed about twice higher thermal performance than the others GHEs. Furthermore, intermittent operation condition showed 30~40% higher heat exchange rates than continuous operation condition.

• Journal of the Korean Dietetic Association
• /
• v.4 no.1
• /
• pp.88-98
• /
• 1998

The purposes of this research were to assess the quality of worklife of university foodservice managers and workers by operation type, and to investigate the characteristics of demographic variables in university foodservice employees. A questionnaire was administered to 27 managers and 180 personnels who are working in 9 university foodservice facilities. And 21 managers and 160 workers were responded with a response rate of 78% and 89%, respectively. Statistical data analysis was completed using the SPSS programs for descriptive analysis, ANOVA, T-test and SNK test. The results of this study can be summarized as follows : 1. Almost all respondents were female(87%), 40.5 percent of the respondents were between 40 to 49 years of age, 42.9 percent of the respondents had been in their current job between 2 to 5 years, and 55.2 percent of the respondents earned ays between 500,000won to 800,000won per month, Only 42.6% percent of the respondents were full-time employee. 2. The mean scores for the quality of worklife was 3.07 on a 5-point scales of 1=disagree very much and 5 = agree very much. 3. Factors receiving the higher ratings included "optimum levels of work variety"(3.83), "positive attitude toward work"(4.14), and " cooperative relationship with coworkers"(4.22). But respondents were least satisfied with "promotion"(2.07),"temperature of workplace"(2.17) " rest time"(2.25), and "pay"(2.28) factors. 4. There was a significant difference in the perception of the quality of worklife according to the operation type(self-operated, contracted, and rented management), but no difference was noted by position(managers vs workers) Results can be user to develop intervention and training strategies for enhancing positive attitude and the quality of work of employees.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.345-358
• /
• 2018

The high altitude scientific balloon has been used for decades in advanced aerospace countries such as United States, France, and Japan to carry out various research objectives. Since the initial cost for development and operation is enormous, it has been conducted by national research institutes. Recently, the advent of open source software/hardware ecosystems with low-cost yet high-performance have lowered barriers to enter into scientific balloon research and development. In this study, a zero pressure balloon prototype was designed considering the cost, usability, compatibility, and development period by using commercial off the shelf (COTS) items. In addition, the flight operation experience was accumulated through eight times of the flight tests, and operational reliability of the balloon system was verified. Finally, the foundation for the operation of the large zero pressure balloon was established.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.4
• /
• pp.1-11
• /
• 2017

This article reviews the recent activities of field testing and application of superconducting fault current limiters (SFCL) based on high-temperature superconductors (HTS). The review particularly focuses on the trends in the field tests in terms of the technical aspects and commercial activities of the SFCLs. Stimulated by the discovery of HTS, numerous research and development activities have been conducted worldwide for SFCLs operating from distribution voltages to transmission voltages. Different types of SFCLs have been developed and field-tested. Consequently, more than 20 field tests and applications have been performed on real grids worldwide while supplying electric power to the customers. These field tests have not only provided the track records of the operation experiences including the problems and maintenance during operation, but also proved their current limiting capabilities against real faults, rendering this new technology highly viable. Through these activities, the following trends in the status of field testing and application are observed. Resistive-type SFCLs with HTS-coated conductors were dominantly used in the most recent field tests. This implies that the resistive type is technically more mature than the other types. Bus-bar coupling and transformer feeders were the major application locations. It is of importance that most of the field applications were conducted as R&D projects. A relevant change from the R&D stage to the application stage is shown as recently deployed SFCLs are expected to be under long-term operation and commercial service. Here, we review the installation of these SFCLs by substation. This review also discusses the recent activities for their commercial applications.

• Korean Journal of Head & Neck Oncology
• /
• v.16 no.1
• /
• pp.52-57
• /
• 2000

Purpose: The purpose of the study was to evaluate the sensitivity, specificity and accuracy between the FNAC and intraopevative frozen biopsy based upon the Final histologic diagnosis. Method: Authors studied 232 cases of thyroid nodule operated at Department of Surgery, College of Medicine, Chosun University, from January 1992 to December 1998. The medical records of these patients were studied retrospectively. The cytology of FNAC and the frozen section was compared to the final histologic diagnosis. 232 cases were analysed in regard to correlation of FNAC diagnosis and Intraoperative frozen section with final pathology, preoperative thyroid scan, thyroid function test, ultrasonography, final histopathology of the specimens, and surgical operation methods. 174 cases who underwent FNAC for diagnosis before operation, and Intraoperative frozen-section biopsy were classified according to whether the clinical diagnosis was benign, suspicious or malignant and evaluated the specificity sensitivity and accuracy. Result: Comparing with final histopathology, FNAC as a diagnostic test for thyroid nodules demonstrated an accuracy of 81.3%, a sensitivity of 87.5%, a specificity 86.5% with a false positivity of 2.9%, false negativity of 4.3%, respectively. and Intra-operative frozen section demonstrated an accuracy of 86.8%, a sensitivity of 87.5%, a specificity 92.1%. In the benign lesion, there was no difference in accuracy between FNAC(95.6%) and frozen section(95.1%) but, in the suspicious malignant lesion, frozen section(46.2%) was superior to FNAC(32.0%), and in the malignant disease, FNAC(97.1%) was superior to frozen section(92.3%). Conclusion: Intraoperative frozen section biopsy is useful in patients undergoing surgery for a thyroid nodule with a 'suspicious' malignant lesion and could reduce inadequate extensive excision without missing malignancy and second operation and help to determine the resection margin. It adds no information in patients with a diagnosis of malignancy following FNAC assessment and is of limited use in those in whom a benign lesion is diagnosed.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.4
• /
• pp.149-154
• /
• 2005

Fuel cell performance evaluation logic was developed using G-language (LabVIEW) to measure performance stability. Degree of stability and reliability of performance data were improved with averaged value and standard deviation method. Water injection system was introduced and the performance using this method was comparable to that of conventional humidification method. Water injection system has advantage of lowering operation energy consumption, reducing the number of parts needed in humidification, therefore increasing efficiency of fuel cell system. Fuel cell performance was decreased in case of low temperature operation such as sub freezing condition. Air purge method was tested to reduce the water content in cell fixture before sub freezing condition. The performance degradation due to low temperature operation was minimized by air purge method in medium size cell fixture ($25cm^2$) case.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.489-495
• /
• 2007

The assembly of the main system of the KSTAR tokamak has been recently completed, and the preparation for the 1st plasma and test operations is progressed. The fueling system established for these purposes uses only one port placed at the opposite side of the pumping duct, and has a difficulty of attaining a uniform and fast supply of fuel particles to the plasma. At the base operation stage after finishing the test operation, the fueling system must be improved to provide a uniform fueling and a feed-back control in accordance with a high-density tokamak plasma maintained for a long period. As a part for understanding the points to be improved in the fueling system, a Monte Carlo simulation on the gas fueling into the tokamak plasma has been executed. After modeling the vacuum vessel and the plasma of quasi-D shapes as tori of rectangular cross-sections, the influences of the position and the number of the fueling inputs on the particle density distribution for a given pumping probability and mean free path were investigated.