• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.909-914
• /
• 2007

Fluorine compounds are the essential chemicals for wet processes of semiconductor and LCD production line. Problems of conventional treatments for fluoride wastewater are their high operation costs and low fluoride removal capacity. In this study, cement paste containing various Ca-bearing hydrates such as portlandite, calcium silicate hydrate(CSH), and ettringite was investigated for fluoride removal. The objectives of this study are to assess the feasibility of using cement paste cured mixture of cement and water as an alternative agent for treatment of fluoride wastewater and to investigate fluoride removal capacity of the cement paste. The performance of cement paste was comparable to that of lime in the kinetic test. In column experiment where the effluent fluoride concentrations were below 0.5 mg/L. Then the leached calcium reached the maximum level of 800 mg/L. The nitrate reduced to the level of less than 10 mg/L. Nitrate in the wastewater was exchanged with interlayer sulfate of these cement hydrate LDHs. Phosphate concentration could be reduced to 10 mg/L by forming calcium phosphate. These results indicate that the cement paste generally has advantageous characteristics as an economical and viable substitute for lime to remove fluoride.

• Journal of Biomedical Engineering Research
• /
• v.38 no.4
• /
• pp.143-152
• /
• 2017

The main purpose of this research was to examine the EMG characteristics of driver's upper limb and driving performance for operating accelerator and brake pedal by using four types of left hand control devices(Push/Pull, Push/Right angle, Push/Rock, Push/Twist) during simulated driving. The persons with disabilities in the lower extremity have problems in operation of the vehicle because of functional impairments for controlling accelerator and brake pedal. Therefore, if hand control device is used for adaptive driving controls in persons with lower extremity loss, the disabled people could improve their quality of mobility life by driving a car. Twenty subjects were involved in this research to assess driving performance and EMG activities for operating accelerator and brake pedal by using four types of left hand controls in driving simulator. We measured EMG responses of six muscles(posterior deltoid, middle deltoid, biceps, triceps, extensor carpi radialis, and flexor carpi radialis) during pulling and pushing movement with four types of left hand controls for acceleration and braking. STISim Drive 3 program was used for evaluation test of four types of left hand control devices in straight lane course for time to reach target speed and brake reaction time. While operating the four types of left hand controls for acceleration, EMG activities of posterior deltoid in normal subjects were significantly increased(p < 0.05) compared to the disabled subjects. It was also found that EMG responses of triceps and posterior deltoid were significantly increased(p < 0.05) when using the Push/Right angle type than Push/Pull type. While operating the four types of left hand controls for braking, EMG activities of flexor carpi radialis and triceps in subjects with disability were significantly increased(p < 0.05) compared to the normal subjects. It was shown that muscle responses of posterior deltoid, middle deltoid and triceps were significantly increased when using the Push/Right angle type than Push/Rock type. Time to reach target speed and brake reaction time in subjects with disability was increased by 2.5% and 4.6% on average compared to normal subjects. The person with disabilities showed a tendency to relatively slow performance in acceleration at the straight lane course.

• Quality Improvement in Health Care
• /
• v.8 no.2
• /
• pp.208-217
• /
• 2001

Background : The objective of this study is proving the basic data for developing a management system for the discharges against medical advice(AMA) by identifying the characteristics of the AMA patients of an university hospital for 10 years. Methods : By using discharge abstract data base, we divided the total discharges(435,254) into two groups, discharge against medical advice and discharge with discharge order. We confirmed the characteristics of AMA group by analyzing discharge abstract data of the both groups by SAS software V6.12 and $x^2$ test. Medical records of AMA patients in the year 2000 were reviewed to identify the reasons for AMA which we couldn't extract from discharge abstract DB. Result : The total number of AMA for 10 years were 9,358(2.15%) and the AMA rate has been continuously decreased for 10 years. Male, admission through emergency room, discharges admission via other hospital, patients without operation during hospitalization, discharges in hopeless or not improved condition showed higher AMA rate. The AMA rate was higher as the age of the patients was higher, and the average length of stay was longer in AMA patients than in those with discharge order. The AMA rate in psychiatry was highest(14.3%) and it was higher in surgery departments than those of medical or other sections. The AMA rate varied by attending physicians even in the same department and it was statistically significant. Patients with the principal diagnosis of "medical observation and evaluation for suspected diseases" showed the highest AMA rate(15.5%), and that of schizophrenia or psychosis was the nest. One hundred twenty-one patients(19.5%) out of 622 AMA in 2000 discharged against medical advice for transfer to order health care facilities. Among them 71 patients(58.7%) discharged with their medical care information, such as copies of medical record, medical certificates, summaries, etc. Written oath of the patients discharged AMA was filed in their medical records in 466 cases(74.9%) although some of them were incomplete. Conclusion : Characteristics of AMA discharge could be used as the basic data in developing a system to manage the patients who have risk factors to leave the hospital against medical advice. By reducing number of patients leaving the hospital against medical advice we can increase satisfaction of medical providers and consumers.

• 대한공업교육학회지
• /
• v.39 no.2
• /
• pp.81-100
• /
• 2014

This study developed training program to educate professional workers for software industry with growing importance in this area as software industry takes more parts in Korean economy. Additionally, this study developed the program based on national competency standards(NCS) using structured on the job training(S-OJT), For this study, we reviewed economic index about software industry such as economic ratio and the influx of the workforce. Also literature review for S-OJT was conducted to explore its concept for better application of the concept to the program development. In addition, this study used training program development manual suggested by Korean Department of Labor. We selected specific job which needs training program to be developed based on thorough needs analysis for a company A. Previously developed NCS and other documents were reviewed and focus group interviews were conducted to find out core knowledge and skills for the job. 44 training programs were developed and objective of each program, hours, contents and methods were also suggested. Additionally detailed program name, education system, road map and operation strategy were developed and suggested. The result of this study is expected to contribute to other industry and jobs which are facing to the development of NCS based education program by suggesting detailed stage of development process. For more animated development of education program using NCS, the effect of the program should be tested in the future. For the test, appropriate evaluation methods and measures should be developed as well.

• Microbiology and Biotechnology Letters
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

Biofilm media was equipped in two-compartmented wastewater treatment bioreactor which was separated by porcelain septum. DC 2.0 volt of electric potential was charged to anodic (oxidative) biofilm media (ABM) to induce oxidation potential but not to that of carbon (neutral) biofilm media (CBM) that was used for control test. Biofilm structure, biomass variation, Off variation and wastewater treatment efficiency in the bioreactor equipped with ABM (ABM-bioreactor) and CBM (CBM-bioreactor). Time-coursed variation of biofilm structure forming on surface of ABM and CBM was observed by scanning electron microscopy. The biofilm growing on ABM was dispersed on surface and was not completely covered the media but the biofilm growing on CBM was continuously increased and finally covered the media. The ORP of CBM was decreased to 100 mV, which was reciprocally proportional to the biomass growth. However, the ORP of ABM was about 800 mV, which was maintained during operation for about 60 days. The treatment efficiency of COD in the ABM bioreactor was 2 times higher than those in the CBM bioreactor. From these results, we proposed that electrochemical oxidation potential charged to biofilm media may inhibit formation of biofilm extremely condensed and activate bacterial cell metabolism.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.27.1-27.1
• /
• 2008

KASI (Korea Astronomy and Space Science Institute) is developing a compact wide-field survey space telescope system, MIRIS (The Multi-purpose IR Imaging System) to be launched in 2010 as the main payload of the Korea Science and Technology Satellite 3. Through recent System Design Review (SDR) and Preliminary Design Review (PDR), most of the system design concept was reviewed and confirmed. The near IR imaging system adopted short F/2 optics for wide field low resolution observation at wavelength band 0.9~2.0 um minimizing the effect of attitude control system. The mechanical system is composed of a cover, baffle, optics, and detector system using a $256\times256$ Teledyne PICNIC FPA providing a $3.67\times3.67$ degree field of view with a pixel scale of 51.6 arcsec. We designed a support system to minimize heat transfer with Muti-Layer Insulation. The electronics of the MIRIS system is composed of 7 boards including DSP, control, SCIF. Particular attention is being paid to develop mission operation scenario for space observation to minimize IR background radiation from the Earth and Sun. The scientific purpose of MIRIS is to survey the Galactic plane in the emission line of Pa$\alpha$ ($1.88{\mu}m$) and to detect the cosmic infrared background (CIB) radiation. The CIB is being suspected to be originated from the first generation stars of the Universe and we will test this hypothesis by comparing the fluctuations in I (0.9~1.2 um) and H (1.2~2.0 um) bands to search the red shifted Lyman cutoff signature.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2007

Purpose: Digital medical image commenced with an introduction of PACS has become more popular today in the radiation diagnosis and medical treatment and made great progress, in particular, for medical testing field, whereas it has made slow progress for radiation therapy area. In order to accommodate the current trend of digital from analog, a spherical type mechanical check device (SMCD) that is form of spherical differing from the existing form of flat or cube has been designed and tested its practicability to replace the part in mechanical check with digital image from QA operation. Materials and Methods: If the distance maintains constant between source(target) and image detector with constant distance to the center of spherical type mechanical check device(SMCD), the size will be shown as a constant image at all times regardless of its direction exposed. For the test, two accurate hemispheres are made and put together which results in a sphere of the equilateral circle. Results: It enables a variety of implementation of the existing mechanical check using digital image as follows: congruity level of radiation field and light field, size accuracy of radiation field and collimation field, gantry rotation isocenter check, collimation rotation isocenter check, room laser accuracy check, collimation rotation angle check, couch rotation angle check, and more. Conclusion: It has proved its practicability in checking isocenter congruity level as real time at the time of simultaneous rotation between gantry and couch that is applied to the non-coplanar field, which had been hard to apply as a device formed of existing flat or cube.

• Journal of Biomedical Engineering Research
• /
• v.38 no.2
• /
• pp.74-81
• /
• 2017

The purpose of this study was to investigate the EMG characteristics of driver's upper extremity and driving performance for manipulating brake and accelerator pedal by using left and right hand control devices during simulated driving. The people with disabilities in the lower limb have problems in operation of the motor vehicle because of functional loss for manipulating brake and accelerator pedal. Therefore, if hand control device is used for adaptive driving controls in people with lower limb impairments, the disabled people can improve their quality of life by driving a motor vehicle. Six subjects were participated in this study to evaluate driving performance and muscle activities for operating brake and accelerator pedal by using two different hand controls (steering column mounted hand control and floor mounted hand control) in driving simulator. We measured EMG activities of six muscles (posterior deltoid, middle deltoid, triceps, biceps, flexor carpi radialis, and extensor carpi radialis) during pushing and pulling movement with different hand controls for acceleration and braking. STISim Drive 3 software was used for the performance test of different hand control devices in straight lane course for time to reach target speed and brake reaction time. While pulling the hand control lever toward the driver, normalized EMG activities of middle deltoid, triceps and flexor carpi radialis in subjects with disabilities were significantly increased (p < 0.05) compared to the normal subjects. It was also found that muscle responses of posterior deltoid were significantly increased (p < 0.05) when using the right hand control than left hand control. While pushing the hand control lever forward away from the driver, normalized EMG activities of posterior deltoid, middle deltoid and extensor carpi radialis in subjects with disability were significantly increased (p < 0.05) compared to the normal subjects. It was shown that muscle responses of middle deltoid, biceps and extensor carpi radialis were significantly increased when using the right hand control than left hand control. Brake reaction time and time to reach target speed in subjects with disability was increased by 12% and 11.3% on average compared to normal subjects. The subjects with physical disabilities showed a tendency to relatively slow acceleration at the straight lane course.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.175-190
• /
• 2018

This was a descriptive study aiming to verify the effects of work environment, job satisfaction, and organizational commitment on the turnover intention of Clinical Research Coordinator(CRC) nurses. In the results of this study, the organizational commitment had significant effects on the turnover intention of CRC nurses. On the other hand, the work environment and job satisfaction had no statistically significant effects on the turnover intention of CRC nurses. Based on the results of this study, the main discussions were drawn as follows. In order to increase the organizational commitment, it would be necessary to have the institutional improvement like the increase of opportunity to participate in the hospital operation, administration, and the establishment of affiliated institution for improving a sense of belonging. It would be also necessary for each hospital to establish the standard of welfare, wage system for the improvement of work environment. If the organizational commitment of CRC nurses who are the actual performers, supporters of researches is ignored, it is unavoidable that the performance and quality of clinical tests would be declined. Therefore, there should be some changes, so that CRC nurses could play a pivotal role in the whole process of clinical test, by changing the employment status from contract position to more stable employment status, to increase their commitment to organization and work continuity.