• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.32-41
• /
• 2021

A groundwater source heat pump (GWHP) was developed in this study by adapting a borehole heat exchanger with closed-loop and open-loop systems in a new building. In the pilot test building, the air-conditioning on the second floor was designed to employ a closed-loop system and that on the third floor had an open-loop system. The GWHP design is based on the feasibility of groundwater resources at the installation site. For the hydrogeological survey of the study site, pumping and injection tests were conducted, and the feasibility of GWHP installation was evaluated based on the air-conditioning load demand of the building. The site was found to be satisfactory for the design capacity of the thermal load and water quality. In addition, the effect of groundwater movement on the performance of the closed-loop system was tested under three different operational scenarios of groundwater pumping. The performance of the system was sustainable with groundwater flow but declined without appropriate groundwater flow. From long-term observations of the operation, the aquifer temperature change was less than 2℃ at the observation well and 5℃ at the injection well with respect to the initial groundwater temperature. This pilot study is expected to be of guidance for developing GWHPs at fractured rock aquifers.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.157-163
• /
• 2022

An automatic mooring system for a ship consists of a vacuum suction pad and a mechanical part, enabling quick and safe mooring of a ship. In the development of a mooring system, the design of a vacuum suction pad is a key to secure enough mooring forces and achieve stable operation of a mooring system. In the vacuum suction pad, properly designing its rubber seal determines the performance of the suction pad. Therefore, it is necessary to appropriately design the rubber seal for maintaining a high-vacuum condition inside the pad as well as achieving its mechanical robustness for long-time use. Finite element analysis for the design of the rubber seal requires the use of an appropriate strain energy function model to accurately simulate mechanical behavior of the rubber seal material. In this study, we conducted simple uniaxial tensile testing of Chloroprene Rubber (CR) to explore the strain energy function model best-fitted to its experimentally measured engineering strain-stress curves depending on various temperature environments. This study elucidates the temperature-dependent mechanical behaviors of CR and will be foundational to design rubber seal for an automatic mooring system under various temperature conditions.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1206-1212
• /
• 2022

Cold-crucible induction melting (CCIM) technology has been intensively studied as an advanced vitrification process for the immobilization of highly radioactive waste. This technology uses high-frequency induction to melt a glass matrix and waste, while the outer surface of the crucible is water-cooled, resulting in the formation of a frozen glass layer (skull). In this study, for the fabrication of borosilicate glass waste form, CCIM operation test with 60 kg of glass per batch was conducted using surrogate wastes composed of Cs, Sr, and Nd as a representative of highly radioactive nuclides generated during spent nuclear fuel management. A 60 kg-scale glass waste form was successfully fabricated through melting and draining processes using a CCIM system, and its physicochemical properties were analyzed. In particular, to enhance the controllability and reliability of the draining process, an air-cooling drain control method that can control draining through air-cooling near drain holes was developed, and its validity for draining control was verified. The method can offer controllability on various draining processes, such as molten salt or molten metal draining processes, and can be applied to a process requiring high throughput draining.

• Journal of Information Technology Services
• /
• v.21 no.4
• /
• pp.63-74
• /
• 2022

Globally researchers at medical institutions are actively sharing COHORT data of patients to develop vaccines and treatments to overcome the COVID-19 crisis. OMOP-CDM, a common data model that efficiently shares medical data research independently operated by individual medical institutions has patient personal information (e.g. PII, PHI). Although PII and PHI are managed and shared indistinguishably through de-identification or anonymization in medical institutions they could not be guaranteed at 100% by complete de-identification and anonymization. For this reason the security of the OMOP-CDM database is important but there is no detailed and specific OMOP-CDM security inspection tool so risk mitigation measures are being taken with a general security inspection tool. This study intends to study and present a model for implementing a tool to check the security vulnerability of OMOP-CDM by analyzing the security guidelines for the US database and security controls of the personal information protection of the NIST. Additionally it intends to verify the implementation feasibility by real field demonstration in an actual 3 hospitals environment. As a result of checking the security status of the test server and the CDM database of the three hospitals in operation, most of the database audit and encryption functions were found to be insufficient. Based on these inspection results it was applied to the optimization study of the complex and time-consuming CDM CSF developed in the "Development of Security Framework Required for CDM-based Distributed Research" task of the Korea Health Industry Promotion Agency. According to several recent newspaper articles, Ramsomware attacks on financially large hospitals are intensifying. Organizations that are currently operating or will operate CDM databases need to install database audits(proofing) and encryption (data protection) that are not provided by the OMOP-CDM database template to prevent attackers from compromising.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1432-1440
• /
• 2022

Recently, as Virtual Desktop Infrastructure(VDI) is widely used not only in office work environments but also in workloads that use high-spec multi-core-based applications, the requirements for real-time and stability of VDI are increasing. Accordingly, the display protocol used for remote access in VDI and performance optimization of virtual machines have also become more important. In this paper, we propose two ways to configure desktop virtualization for multi-core-based application operation. First, we propose a codec configuration of a display protocol with optimal performance in a high load situation due to multi-processing. Second, we propose a virtual CPU scheduling optimization method to reduce scheduling delay in case of CPU contention between virtual machines. As a result of the test, it was confirmed that the H.264 codec of Blast Extreme showed the best and stable frame, and the scheduling performance of the virtual CPU was improved through scheduling optimization.

• Journal of Korea Trade
• /
• v.23 no.5
• /
• pp.87-101
• /
• 2019

Purpose - This paper examines the effectiveness of the foreign exchange risk insurance system in the promotion of SME exports in Korea. The purpose of this study is to analyze the short-term and long-term responses of SME exports to foreign exchange risk insurance support policies. Based on these empirical studies, we would like to present some operational improvements to the operation of the foreign exchange risk insurance system. Design/methodology - In order to analyze the effect of exchange risk insurance on the exports of SMEs, a VAR model consisting of foreign exchange risk insurance underwriting values, export relative price, and domestic demand pressure, including export volume, was established. The study began with tests of the stationarity of time series data. The unit root tests showed that all concerned variables were non-stationary. Accordingly, the results of the cointegration test showed that the tested variables are not cointegrated. Finally, an impulse response function and variance decomposition analysis were conducted to analyze the impulse of foreign exchange risk insurance on exports of SMEs. Findings - As a result of estimating the VAR (1) model, foreign exchange risk insurance was found to be significant at a 1% significance level for SME' export promotion. In the impulse response analysis, SMEs' export response to the impulse of foreign exchange risk insurance showed that exports gradually increased until the third quarter, and then slowed down. However, the impulse did not disappear, and appeared continuously. Originality/value - This study analyzed the effect of foreign exchange insurance on exports of SMEs by applying the VAR model. In particular, this study is the first to analyze the short-term and long-term effects of foreign exchange risk insurance on exports of SMEs. The empirical evidence in the current study have a policy implication for the policy authority to support and promote the foreign exchange risk insurance in the effect of exchange rate volatility on Korea' export SMEs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.955-961
• /
• 2021

In modern warfare, the importance of electronic warfare, which carries out a mission that using radio wave to find out enemy information or to protect ally information, has increased. Radar jamming technique is one of the most representative techniques of EA(Electronic Attack), it disturbs and deceives enemy radar system in order to secure ally location information. Velocity deception jamming technique, which is one of the radar jamming techniques, generally operate against pulse-doppler radar which use doppler effect in order to track target's velocity and location. Velocity Deception Jamming Technique can be implemented using DRFM(Digital Radio Frequency Memory) that performs Frequency Modulation. In this paper, I describe implementation method of VGPO/VGPI(Velocity Gate Pull-Off/Pull-In) velocity deception jamming technique using phase-sampled DRFM, and verify the operation of VGPO/VGPI velocity deception jamming technique with board test under signal injection condition.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.806-813
• /
• 2021

The purpose of this study is to analyze the perceptions and difficulties of early childhood teachers about the revised Nuri Curriculum, and to provide basic data for stable operation. 128 early childhood teachers in Seoul and Gyeonggi Province were surveyed, and frequency analysis and chi-square test were performed using the SPSS 27.0 program. As a result of the study, teachers recognized the difference in child evaluation in the Nuri Curriculum and the revised Nuri Curriculum, and recognized the difference in the evaluation method the most. Some of the items on perception showed a significant difference according to the educational experience of teachers. Teachers recognized 'autonomy' as the focus of early childhood evaluation, and at the same time recognized that it was the biggest factor that made child evaluation difficult. The interactive peer-to-peer workshop showed the highest demand for early childhood evaluation. The results of this study will be the basis for finding ways to support teachers in charge of early childhood evaluation in the revised Nuri Curriculum.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.6
• /
• pp.617-627
• /
• 2022

Military training is an essential item for the fundamental problem of war. However, there has always been a problem that many resources are consumed, causing spatial and environmental pollution. The concepts of defense modeling and simulation and CGF(Computer Generated Force) using computer technology began to appear to improve this problem. The Naval Operations, Resources Analysis Model(NORAM) developed by the Republic of Korea Navy is also a DEVS(Discrete Event Simulation)-based naval virtual force analysis model. The current NORAM is a battle experiment conducted by an operator, and parameter values such as maneuver and armament operation for individual objects for each situation are evaluated. In spite of our research conducted evolutionary, supervised, reinforcement learning, in this paper, we introduce our design of a scenario creation model based on evolutionary learning using genetic algorithms. For verification, the NORAM is loaded with our model to analyze wartime engagements. Human-level tactical scenario creation capability is secured by automatically generating enemy tactical scenarios for human-designed Blue Army tactical scenarios.