• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.458-465
• /
• 2004

To reaffirm the use of a mainstream CMOS process for designing passive-like attenuator structures, a linearly controlled variable attenuator is realized with 0.35${\mu}{\textrm}{m}$ 2-poly 4-metal CMOS process. It uses the П configuration for large attenuation range and suitable matching property. Compared to conventional passive-like CMOS attenuators, it is demonstrated that this work advances the frequency band from MHz to ㎓ (DC- l㎓), and reduces the size to 700${\mu}{\textrm}{m}$${\times}$300${\mu}{\textrm}{m}$.. Both simulation results and test results are provided. They show the improved linear relation between attenuation and control voltage. It is very useful in CDMA or GSM band, which uses under 1㎓ frequency band. An alternative topology, Bridged-T configuration, is proposed to get over the limit of applications by elevating operation bandwidth. The proposed topology covers over DC-2㎓ frequency band, which means that the proposed architecture can cover the tripleband (800MHz CDMA/GSM, 1.5㎓ GPS, 1.9㎓z PCS system) in applications as well. The simulation results are provided.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.235-244
• /
• 2009

The mission-critical computer for air defense has to maintain its operation without any fault for a long mission time and is required to implement at low cost. Now the reliability of the mission critical-computer using Active Sparing Redundancy fault-tolerant technique is inferior to that of the computer using TMR technique. So in this paper are proposed Extended ASR(EASR) technique that provides higher reliability than that of the computer using TMR technique. The fault-tolerant performance of the implemented mission-critical computer is proven through reliability analysis and numbers of fault recovery test. Also, the reliability of the mission-critical computer using EASR technique is compared with those of computer using ASR and TMR techniques. EASR technique is very suitable to the mission-critical computer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05a
• /
• pp.65-68
• /
• 2003

Interconnected power system operation has given rise to the problem of increased fault levels and leads to over stressing of all the components. Use have been made of recently developed high Tc superconductor in devising a superconducting fault current limiter (SFCL) that promises optimum performance in terms of capital cost, size, auto sensing, operational losses, response time and reliability. Recently, research about the application of the SFCL is actively progressing in Korea. To be applied for SFCL practically, the electrical insulation design of SFCL must be developed. Therefore, this paper presents the result of an investigation of the dielectric characteristics of turn-to-turn insulation for SFCL in liquid nitrogen. The dielectric characteristics of turn-to-turn insulation models of SFCL were investigated. We obtained following results. The breakdown voltages increased as the spacer thickness and length increased. And the breakdown voltages of turn-to-turn model without spacer were higher than the breakdown voltages of turn-to-turn model with spacer under impulse as well as AC voltages. The information gathered in this test series should be helpful in the design of liquid nitrogen filled SFCL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.880-886
• /
• 2014

Many railway signalling functions have increasingly depended on computer software with recent development in computing technology, leading to evolution into more flexible and intelligent railway signalling system. Meanwhile, software programs are likely to have many errors and the cost incurred by such errors has increased. Especially, if fatal software error occurs during railway operation, it may result in loss of lives. So the software verification and validation have become more important. It is needed for software functional safety tool to support these, but most commercial tools depend on direct access to the system's memory, resulting in many difficulties in application. Owing to such difficulties and complexity, they are rarely used in railway signalling system software validation. In this study, a new testing tool for software functional testing through an external interface that can be easily used in functional testing of software was developed. Such testing tool allows development and analysis of test cases for black-box testing through analysis of actually used interface protocols, leading to increased user convenience.

• Journal of Environmental Health Sciences
• /
• v.40 no.3
• /
• pp.225-233
• /
• 2014

Objective: This study was performed in order to investigate the distribution of antibiotic resistant E. coli and water quality in waterscape facilities. Methods: Nine waterscape facilities were selected and classified into three types: ground, wall and general fountain. The items analyzed in this study were pH, turbidity, $KMnO_4$ consumption, total colony, total coliforms, fecal coliforms and E. coli. Additionally, an antibiotic resistance test on E. coli was performed. Results: There were no sampling sites that exceeded the permitted limits of water quality, but the concentration of pollutants was high at the beginning operation in June. Moreover, concentration of turbidity, $KMnO_4$ consumption and total colony were higher in ground fountains than in wall and general fountains. Five species of antibiotic resistant E. coli were detected from three sampling sites. Conclusions: The waterscape facilities were significantly contaminated with water microorganisms, especially total colony, total coliforms and fecal coliforms. Disinfection and filtration systems to remove pollutants should be installed for safe waterscape facilities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.251-258
• /
• 2010

This paper presents the technology for the design, fabrication, and characterization of a microfluidic system interface (MSI); the purpose of this technology is to enable the integration of complex microfluidic systems. The MSI technology can be applied in a simple manner for realizing complex arrangements of microfluidic interconnects, integrated microvalves for fluid control, and optical windows for on-chip optical processes. A microfluidic system for the preparation of genetic samples was used as the test vehicle to prove the effectiveness of the MSI technology for packaging complex microfluidic systems with multiple functionalities. The miniaturized genetic sample preparation system comprised several functional compartments, including compartments for cell purification, cell separation, cell lysis, solid-phase DNA extraction, polymerase chain reaction, and capillary electrophoresis. Additionally, the functional operation of the solid-phase extraction and PCR thermocycling compartments was demonstrated by using the MSI.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.413-418
• /
• 2008

The toroidal field magnet power supply (TF MPS) for the KSTAR was constructed in August, 2007 and started the operation for the commissioning in March, 2008. The main role of the TF MPS is to supply the electric power to the TF magnet of the KSTAR. The water cooling components of the TF MPS are 16 stacks, busbar of 70 meters. For the cooling of the TF MPS, the D I water cooling system was designed and installed. The water cooling system consists of several pumps, heat exchangers, D I water polishing system and so on. The water cooling system for the TF MPS was tested under the 15 kA current charging condition. In this paper be discussed about the system performance and other parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.462-469
• /
• 2008

A regenerative evaporative cooler has been fabricated and tested for the evaluation of cooling performance. The regenerative evaporative cooler is a kind of indirect evaporative cooler comprised of multiple pairs of dry and wet channels. The air flowing through the dry channels is cooled without any change in the humidity and at the outlet of the dry channel a part of air is redirected to the wet channel where the evaporative cooling takes place. The regenerative evaporative cooler fabricated in this study consists of the multiple pairs of finned channels in counterflow arrangement. The fins and heat transfer plates were made of aluminum and brazed for good thermal connection. Thin porous layer coating was applied to the internal surface of the wet channel to improve surface wettability. The regenerative evaporative cooler was placed in a climate chamber and tested at various operation condition. The cooling performance is found greatly influenced by the evaporation water flow rate. To improve the cooling performance, the evaporation water flow rate needs to be minimized as far as the even distribution of the evaporation water is secured. At the inlet condition of $32^{\circ}C$ and 50%RH, the outlet temperature was measured at $22^{\circ}C$ which is well below the inlet wet-bulb temperature of $23.7^{\circ}C$.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.230-235
• /
• 2009

We have conducted an experimental study to analyze characteristics of the wheel profile wear and an influence of the wheel flange wear on the vehicle's vibration characteristics. In experiment with EMU, wheel profile wear is severe at the beginning of the commercial operation. In this stage, the variations of the wheel dimension parameters and equivalent conicity is changed rapidly. Along with a mileage of the test vehicle, the wear of the wheel flange is increased and also the vibration level of the car-body is increased. The peak-peak mean value of the body vibration is estimated as good level, but the level is approached at the limit of the good level as mileage increases. Especially, the peak-peak maximum value of the body vibration shows the distinct increase of vibration level.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2015

Maintenance and repair devices used for the inspection of the main parts of domestic railway vehicles have been imported from abroad. Especially, one of the representative domestic devices, the 'Wheel Profile Inspector System (WPIS)', was made by benchmarking foreign devices; this vehicle has been operated in the field. However, problems such as the reliability and performance of the WPIS in operation have appeared. In this study, in order to improve the precision and reliability of the WPIS for maintenance and inspection of railway vehicle wheels, the researchers improved the railway vehicle's WPIS by applying high-speed vision camera technology and an optimized image algorithm. The test results show that the reliability of the developed WPIS improved by approximately 10.4% compared to that of the conventional system.