• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.527-537
• /
• 2021

Purpose: The purpose of this study was to suggest an improved version of Proof-of-Nonce (PoN) algorithm, which is a distributed consensus algorithm used for block chain system. Methods: First, we used response surface method for design of experiment that is to generate experimental points considering non-linear relationship among variables. Then, we employed overlapped contour plots for visualizing the impact of control variables to performance target. Results: First, we modified the consensus procedure of the existing PoN algorithm by diminishing the content of the exchanged message. Then, we verified the performance improvement of the new PoN algorithm by performing a numerical experiment and paired t-test. Finally, we established new regression models for consensus time and Transactions per second (TPS) and proposed a method for optimizing control variables for obtaining performance target. Conclusion: We could improve the performance of the previous version of PoN algorithm by modifying the content of the exchanged message during 4-steps of consensus procedure, which might be a stepping stone for designing an efficient and effective consensus algorithm for blockchain system with dynamic operation environment.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3196-3206
• /
• 2021

For the Korean design of the PCCS (passive containment cooling system) in an innovative PWR, the overall thermal resistance around a condenser tube is dominated by the heat transfer coefficient of steam condensation on the exterior surface. It has been reported, however, that the calculated heat transfer coefficients by thermal-hydraulic system codes were much lower than measured data in separate effect tests. In this study, a new empirical model of steam condensation in the presence of a noncondensable gas was implemented into the MARS-KS 1.4 code to replace the conventional Colburn-Hougen model. The selected correlation had been developed from condensation test data obtained at the JERICHO (JNU Experimental Rig for Investigation of Condensation Heat transfer On tube) facility, and considered the effect of the Grashof number for naturally circulating gas mixture and the curvature of the condenser tube. The modified MARS-KS code was applied to simulate the transient response of the containment equipped with the PCCS to the large-break loss-of-coolant accident. The heat removal performances of the PCCS and corresponding evolution of the containment pressure were compared to those calculated via the original model. Various thermal-hydraulic parameters associated with the natural circulation operation through the heat transport circuit were also investigated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.957-968
• /
• 2021

To improve the data on reliability of the onshore fish farm water quality monitoring system and operate the system efficiently, the water quality data of the onshore seawater fish farms which are progressing test operation, and the marine environmental information network(Wando tidal station) were compared and analyzed. Furthermore, data validation, data range filters, and data displacement checks were applied to analyze the data in a way that eliminates the data errors in water quality monitoring systems and increases the reliability of measurement data.

• Current Photovoltaic Research
• /
• v.9 no.3
• /
• pp.106-109
• /
• 2021

In order to perform photovoltaic (PV) operation and management (O&M) efficiently, individual PV module monitoring is becoming more important. In this research, we developed wireless IoT sensor which can monitor individual photovoltaic modules. This IoT sensor can detect the output voltage, current and module temperature of individual modules and provide monitored data by wireless communication. Measured voltage error was 1.23%, and it shows 16.6 dBM, 0.42sec and 7.1 mA for voltage, transmittance output, response time and mean power consumption, respectively. IoT sensors were demonstrated in the test field with real climate environment condition and each of 5 sensors showed precise results of voltage, current and temperature. Also, sensors were compared with commercial power-optimizers and showed result difference within 5%.

• Smart Media Journal
• /
• v.7 no.4
• /
• pp.90-98
• /
• 2018

A Multilinear LDA Method of Tensor Representation for ECG Signal Based Individual Identification Electrocardiogram signals, included in the cardiac electrical activity, are often analyzed and used for various purposes such as heart rate measurement, heartbeat rhythm test, heart abnormality diagnosis, emotion recognition and biometrics. The objective of this paper is to perform individual identification operation based on Multilinear Linear Discriminant Analysis (MLDA) with the tensor feature. The MLDA can solve dimensional aspects of classification problems in high-dimensional tensor, and correlated subspaces can be used to distinguish between different classes. In order to evaluate the performance, we used MPhysionet's MIT-BIH database. The experimental results on this database showed that the individual identification by MLDA outperformed that by PCA and LDA.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.606-613
• /
• 2019

In this paper, a new method for flat sweeping automatic hold of wavelength swept laser has proposed. Through the performance test on the implemented laser, even 5 hours passed, the flat sweeping has held up well, and 56nm flat sweeping range, 1kHz sweeping frequency, and 8.8mW average optical power were obtained. This showes that the proposed can eliminate the necessity of hand-operated polarization control required for previous swept lasers in case of long time operation and also optical spectrum analyzer needed to monitor the sweeping spectrum status.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.324-330
• /
• 2019

To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.392-400
• /
• 2019

This paper provides a fin actuation system of missile based on electromagnetic-spring mechanism to miniaturize the system and lower the cost. Compared with proportional electro-mechanical actuators, the output of Electromagnetic-Spring Actuators(EMSA) has two or three discrete states, but the mechanical configuration of EMSA is simple since it does not need power trains like gears. The simple mechanism of EMSA makes it easy to build small size, low cost, and relatively high torque actuators. However, fast response time is required to improve the dynamic performance and accuracy of missiles since bang-off-bang operation of EMSA affects the flight performance of missile. In this paper the development of EMSA including parameter optimization and mathematical modeling is described. The simulation results using Simulink and experimental test results of prototype EMSAs are presented.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.17-22
• /
• 2018

Mobile hydraulics require higher energy efficiency, and a simpler as well as robust design, than general industrial hydraulics. The 6/3-way directional control valve is widely used as a mobile hydraulic control valve. However, since the 6/3-way directional control valve is a spool type valve, it is difficult to maintain the load. A counterbalance valve is typically used, to maintain the load, and lift down. However, in an industrial field using a mobile hydraulics device, a pilot controlled check valve may be used to implement holding and lifting operation of the self-weight load, and a relief valve may be used simply to exert back pressure. But no comparative analysis of advantages and disadvantages of each method was revealed. In this study, various methods of holding and unloading load with self-weight in mobile hydraulics are investigated, and compared through simulation using AMESim software. This is experimentally verified by using Festo's mobile hydraulic test rig TP800.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2018

The abnormally high temperature of the train part is related to train accidents and monitoring is important for safe operation of trains. In case of KTX an abnormality detecting device that detects the abnormality of the axle and scans the urban railway is installed on the railroad and when there is an abnormal heat generation, a system for automatically informing the control center is installed. The IR sensors module used in this system are depend on quick response. we have conducted a study on the fast response test method through the production of experimental equipments.