• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.119-120
• /
• 2007

The operation of Interference cancellation algorithm for wireless repeater cancellation depends on either existing correlation properties between desired signal and reference signal or not At the time, due to the correlation properties at the ICS system, adaptive algorithms without considering system delay do not function properly. Thus, this system should be oscillated. In this paper, to solve these problems, we use the delayed least mean square algorithm. For the best performance of ICS, the system delays must be estimated. To efficiently estimate the delay of ICS, we use relations between bandwidth and correlation properties of the received signal.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.86-90
• /
• 2015

Electromagnetic actuators are versatile and able to meet demanding requirements, such as operation in very low or very high temperatures. When the actuator is used in a high-temperature environment up to $500^{\circ}C$, we need to know how the force-producing capability of the actuator is affected by the operating temperature. Specifically, it is necessary to know the temperature-dependence of magnetic properties that determine the mechanical forces. In this paper, we measure the changes in magnetic properties of SUS410 material in high-temperature environment. We also devise a novel signal processing technique to remove the integration drift. At the field strength of 18,000 A/m, we found that the flux density at $500^{\circ}C$ is decreased by 26%, compared to the result at room temperature. Therefore, the actuator must be sized appropriately, if it is to operate in high-temperature settings.

• 설비공학논문집
• /
• 제16권3호
• /
• pp.258-264
• /
• 2004

The ice thermal storage system is to use consolation latent heat of water. But, supercooling phenomenon of water during phase change is to increase the cooling capacity and to decrease COP of the refrigerator. Furthermore, this causes the operation cost of system to increase and the efficiency of energy to decrease. Therefore, the better thermal storage material than the water is required. The purpose of this study is to improve supercooling characteristics and thermal properties of TMA 30wt% clathrate by using Ethanol.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3581-3590
• /
• 2023

High-temperature design evaluations were conducted on Type 316L stainless steel piping for a 700 ℃ large-capacity thermal energy storage verification test loop (TESET) under construction at KAERI. The hot leg piping with sodium coolant at 700 ℃ connects the main components of the loop heater, hot storage tank, and air-to-sodium heat exchanger. Currently, the design rules of ASME B31.1 and RCC-MRx provide design procedures for high-temperature piping in the creep range for Type 316L stainless steel. However, the design material properties around 700 ℃ are not available in those rules. Therefore, a number of material tests, including creep tests at various temperatures, were conducted to determine the insufficient material properties and relevant design coefficients so that high-temperature design on the 700 ℃ piping may be possible. It was shown that Type 316L stainless steel can be used in a 700 ℃ high-temperature piping system of Generation IV reactor systems or a renewable energy systems, such as thermal energy storage systems, for a limited operation time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.108-117
• /
• 2007

생장 기간이 매우 빠르고 섬유방향의 강도적 성질이 우수한 대나무를 합판의 원료로 이용하기 위하여 케루잉단판-솜대 zephyr 복합 패널(WBCB)의 제조 조건(수지접착제의 종류, 도포량, 도포방법)이 패널의 성능에 미치는 영향을 검토하였다. 수지의 종류에 따른 5-ply WBCB의 성능은 폴리메릭 이소시아네이트수지(PMDI)가 가장 좋은 결과를 나타내었으며, 이어 페놀수지(PF), 페놀 멜라민수지, 요소 멜라민수지 및 요소수지의 순이었다. 사용한 수지 중 강도적 측면과 작업성을 고려할 때 PF 수지에 의한 복합 패널 제조가 가장 적절한 것으로 생각된다. PF수지를 사용하여 제조한 12 mm 두께의 5-ply WBCB의 경우, 수지의 도포량이 증가하면 패널의 성능도 향상되는 경향이었다. 또한 박리강도 측정 후의 파괴양상은 도포량이 증가함에 따라 대나무 외층-대나무 내층 경계층의 파괴가 증가한 데 반하여 대나무 제퍼 내부층의 파괴는 상대적으로 감소하였다. 따라서 WBCB 제조시 수지가 다소 zephyr 내부까지 침투할 정도의 수지 도포량이 적절한 것으로 생각되며, 표면 단판의 오염성과 경제성 등을 고려할 때 $320g/m^2$이 가장 적합한 것으로 판단된다. 동일한 PF수지 도포량에서 수지의 도포방법을 달리하여 제조한 5-ply 복합 패널의 성능은 양면과 편면 스프레이 도포 간과 스프레이와 롤러에 의한 도포방법 간에 현저한 차이가 나타나지 않아 주어진 환경에서 작업성이 좋은 도포방법을 채택하면 될 것으로 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.577-582
• /
• 2012

Recently, noise reduction of air-conditioner is one of the important design factors for high quality product. Especially, customer complaints arise due to noise problem of the outdoor unit. After the operation of air-conditioner start, noise level of outdoor unit is increased gradually and sometimes abnormal noise occurs until it reaches steady state condition. The aim of this paper is to investigate the relation between noise of outdoor unit and thermodynamic properties of cycle at transient condition of room air-conditioner. In order to find out the noise characteristics of outdoor unit, noise and vibration measurements are carried out. Also, the thermodynamic properties of compressor and heat exchanger are measured by using temperature and pressure sensors and experimental results are discussed. Finally, we find out the relation between noise and cycle properties at starting of room air-conditioner and the improvement method to reduce noise level is proposed.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.323-331
• /
• 2015

Zirconium alloys are widely used in nuclear reactors as structural materials. During the operation, they are exposed to fast neutrons. Ion irradiation is used to simulate the damage introduced by neutron irradiation. In this article, we briefly review the neutron irradiation damage of zirconium alloys, then summarize the effect of ion irradiation on microstructural evolution, mechanical and corrosion properties, and their relationships. The microstructure components consist of dislocation loops, second phase precipitates, and gas bubbles. The microstructure parameters are also included such as domain size and microstrain determined by X-ray diffraction and the S-parameter determined by positron annihilation. Understanding the relationships of microstructure and properties is necessary for developing new advanced materials with higher irradiation tolerance.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.623-627
• /
• 2010

Semiconducting metal oxides have been frequently used as gas sensing materials. While zinc oxide is a popular material for such applications, structures such as nanowires, nanorods and nanotubes, due to their large surface area, are natural candidates for use as gas sensors of higher sensitivity. The compound ZnO has been studied, due to its chemical and thermal stability, for use as an n-type semiconducting gas sensor. ZnO has a large exciton binding energy and a large bandgap energy at room temperature. Also, ZnO is sensitive to toxic and combustible gases. The NO gas properties of zinc oxide-single wall carbon nanotube (ZnO-SWCNT) composites were investigated. Fabrication includes the deposition of porous SWCNTs on thermally oxidized $SiO_2$ substrates followed by sputter deposition of Zn and thermal oxidation at $400^{\circ}C$ in oxygen. The Zn films were controlled to 50 nm thicknesses. The effects of microstructure and gas sensing properties were studied for process optimization through comparison of ZnO-SWCNT composites with ZnO film. The basic sensor response behavior to 10 ppm NO gas were checked at different operation temperatures in the range of $150-300^{\circ}C$. The highest sensor responses were observed at $300^{\circ}C$ in ZnO film and $250^{\circ}C$ in ZnO-SWCNT composites. The ZnO-SWCNT composite sensor showed a sensor response (~1300%) five times higher than that of pure ZnO thin film sensors at an operation temperature of $250^{\circ}C$.

• 대한교통학회지
• /
• 제30권1호
• /
• pp.59-72
• /
• 2012

교통소통을 개선하기 위해 설치된 오르막차로의 운영효율은 교통상태에 따라 달라지는 것이 관측된다. 교통운영측면에서 교통량(v/c)이 증가하고 중차량 구성비가 증가할 경우, 오르막차로는 오히려 교통혼잡의 요인으로 작용하기도 한다. 이는 교통류 상태에 따라 오르막차로를 동적으로 운영하면 효과가 있다는 것을 시사하지만, 교통운영측면에서 이를 효과적으로 제어할 계량적인 기준은 없는 실정이다. 본 연구에서는 오르막구간에서의 동적차로운영기준의 필요성을 제시하고, 교통특성에 맞는 기준을 수립하여 이에 대한 효과를 분석하고자 하였다. 낙동분기점 마산방향의 오르막구간을 선정하여 교통량비(v/c), 중차량 구성비 등을 교통운영변수로 VISSIM 분석을 시행하였다. 시뮬레이션 결과, 오르막구간의 평균통행속도가 50km/h일 때 오르막차로의 개방과 폐쇄를 결정하는 운영기준(임계통행속도)으로 적절한 것으로 나타났다. 또한 오르막차로 동적운영에 따른 효과를 분석한 결과, 동적운영의 경우 일반적인 개방과 폐쇄보다 편익이 높은 것으로 나타났다.