• 산업공학
• /
• 제23권4호
• /
• pp.311-318
• /
• 2010

In the daily multi-reservoir operating problem, monthly storage targets can be used as principal operational guidelines. In this study, we tested the use of a simple back-propagation Artificial Neural Network (ANN) model to derive monthly storage guideline for daily Coordinated Multi-reservoir Operating Model (CoMOM) of the Han-River basin. This approach is based on the belief that the optimum solution of the daily CoMOM has a good performance, and the ANN model trained with the results of daily CoMOM would produce effective monthly operating guidelines. The optimum results of daily CoMOM is used as the training set for the back-propagation ANN model, which is designed to derive monthly reservoir storage targets in the basin. For the input patterns of the ANN model, we adopted the ratios of initial storage of each dam to the storage of Paldang dam, ratios of monthly expected inflow of each dam to the total inflow of the whole basin, ratios of monthly demand at each dam to the total demand of the whole basin, ratio of total storage of the whole basin to the active storage of Paldang dam, and the ratio of total inflow of the whole basin to the active storage of the whole basin. And the output pattern of ANN model is the optimal final storages that are generated by the daily CoMOM. Then, we analyzed the performance of the ANN model by using a real-time simulation procedure for the multi-reservoir system of the Han-river basin, assuming that historical inflows from October 1st, 2004 to June 30th, 2007 (except July, August, September) were occurred. The simulation results showed that by utilizing the monthly storage target provided by the ANN model, we could reduce the spillages, increase hydropower generation, and secure more water at the end of the planning horizon compared to the historical records.

• 호남수학학술지
• /
• 제23권1호
• /
• pp.145-158
• /
• 2001

In this paper we investigated a replacement model with two types of repairs. Repairs are classified into minimal and perfect repair. An operating unit is completely replaced whenever it reaches age ${\tau}({\tau}>0)$(planned replacement). If it fails at age $t<{\tau}$, it is either restored by a entire unit with probability p(t)(perfect repair), or it undergoes minimal repair with probability $\bar{p}(t)=1-p(t)$. After a planned replacement, the procedure is repeated.

• 대한산업공학회지
• /
• 제3권2호
• /
• pp.99-106
• /
• 1977

A double sampling procedure with zero acceptance number for the first sample whose operating characteristic closely matches that of a given single sampling plan and whose combined sample size does not exceed that of the given single sampling plan is proposed. The proposed double sampling plans corresponding to the MIL-STD-105D plans are tabulated and it is found that their ASN's are considerably smaller than those of corresponding MIL-STD-105D single or double sampling plans.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.811-815
• /
• 1998

Currently in Korea, standard operating procedure for the analyses of phenolic compounds in water is the spectrometric comparison of colors developed by 4-amino antipyrin with phenolic compounds. It is however that this method cannot identify individual compound and that some phenolic compounds do not react with 4-amino antipyrin. Spectrometric determinations of phenolic compounds were compared with chromatographic analyses of gas chromatography (GC) and high pressure liquid chromatography (HPLC) of various phenolic compounds. Individual phenolic compounds could be determined by both chromatographic methods but HPLC methods were more precise with lower detection levels in general.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1992년도 추계학술발표회논문집
• /
• pp.51-55
• /
• 1992

By using the state plane approach, the steady state analysis and design of a half bridge parallel-series (LLC-type) resonant converter (HBPSRC) operating in the continous conduction made is presented. The state-plane diagram representation of the converter response gives good insight into the converter operation. Based on this analysis, a set of steady state characteristic waves for HBPSRC is presented. A simple design procedure is given and design example for a 100watts, 30KHz HBPSRC is presented for illustrative purposes.

• Journal of Mechanical Science and Technology
• /
• 제14권6호
• /
• pp.590-596
• /
• 2000

Cause of excessive vibration with twice the rotational speed of a two-pole generator rotor for the fossil power plants was investigated. The two-pole generator rotor, treated as a typically asymmetric rotor in vibration analysis, produces asynchronous vibration with twice the rotational speed, sub-harmonic critical speeds, and potentially unstable operating zones due to its own inertia and/or stiffness asymmetry. This paper introduces a practical balancing procedure, and presents the results of the investigation on sources of the excessive vibration based on the experimental vibration data of the asymmetric two-pole rotor in balancing.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.285-288
• /
• 1996

This paper deals with an (s, S) spare-part inventory model with general leadtime. In the model, if the inventory level falls to a reorder point s, a replenishment order quantity Q is ordered. Assumming that the number of operating units is one and the lifetime of a unit follows an exponential distribution, we derive the expected cost rate and suggest a procedure to obtain the optimal pair of (s, S) minimizing the cost rate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-78
• /
• 2012

Rotary kiln furnace is one of the most widely used reactors in industrial field. In this paper, 0-dimensional heat and mass balance for direct coal flame rotary kiln was performed preferentially, then a simplified 1-dimensional model was developed based on 0-dimensional analysis data to proceed additional thermal analysis. Compared the results with the currently operating rotary kiln data to validate 1-dimensional model. Through this procedure, it can help to derive fundamental idea for design and operation of rotary kiln.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.123-128
• /
• 2010

This article investigates economic-statistical design of VSI(variable samling interval) charts considering Various Runs Rules. Most recent adaptive control charts are conplex designs. Actually It's not easy to operating control quality process. We propose a procedure for designing VSI Runs charts, based on Lorenzen and Vence's model. The optimal design parameters of the charts can be determined by minimizing the cost model. And computational experiments show that the VSI Runs Rules charts is superior to the FSSI Runs Rules charts in the economic-statistical characterisitics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.204-204
• /
• 2000

This paper describes the development of training simulator for Hadong fossil Power Plant. The simulator was developed to train operator, test new control Logic and evaluate alternative operating procedure for expert engineer of control system. The most control logics such as Siemens TELEPERM ME and GE Mark V are translated directly from microprocessors. Those HMI are also directly emulated. The simulation was performed by ProTRAX modeling software. The paper discusses the configuration of simulator and the simulation results of 30%, 50%, 75% and 100% normal rate load test.