• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2001년도 종합학술발표회논문집
• /
• pp.340-347
• /
• 2001

MAC(Mandatory Access Control)이나 MLS(Multi Level Security) 보안정책이 적용된 보안운영체제는 주체와 객체에 보안등급(Security Level)과 영역(Category) 값을 부여하고, 부여된 이들 정보에 의해 객체에 행해지는 주체의 접근을 제한한다. 하지만, 이러한 MAC과 MLS 보안이 적용된 경우라 하더라도 시스템의 보안정책을 위반하며 불법적 정보를 유통하게 하는 경로가 있을 수 있다. 본 논문에서는 불법적 정보의 유통경로가 되고 있는 IPC(Inter Process Communication) 메커니즘과 스토리지에 의한 비밀채널을(Covert Channel) 문제 해결 위해 커널 수준의 설계와 구현을 시도하였다. IPC 메커니즘에 의한 불법적 정보흐름 제거를 위해 IPC 메커니즘에 MLS 보안정책을 적용하였고, 스토리지 비밀채널는 시스템 콜 명세를 분석하여 이를 식별, 감사, 지연처리가 가능토록 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.189-195
• /
• 2003

This paper represents an identification procedure for leading mechanism of a car A/V system which is composed of a DC motor and a set of plastic gears. In addition, we studied dominant noise source of rattle noise generated by external forced vibration as a car drives. we made a dynamometer to produce stationary operation on loading mechanism of A/V system because noise generated by actual loading mechanism is non-stationary signal. operating the dynamometer setup at various motor speeds, sound pressure spectra are measured and the results are analyzed. its dominant noise source is also identified by using a sound Intensity technique. we made use of multi-dimensional spectral analysis to rind a dominant rattle noise. this method is so useful to eliminate coherence between vibration sources and helps us obtain coherent output spectrum of individual vibration source which make a rattle noise.

• 정보보호학회논문지
• /
• 제13권4호
• /
• pp.47-62
• /
• 2003

패치 분배는 시스템의 보안과 네트워크를 구성하는 여러 시스템들에 설치된 소프트웨어의 취약성을 보완하기 위한 가장 중요한 요소 중의 하나이다. 특정 기관이나 조직은 다양한 운영체제 및 그 응용 프로그램을 사용하기 때문에 매번 신속하게 시스템의 취약성에 대해 패치를 적용하는 것은 쉽지 않다. 본 논문에서 우리는 안전한 패치 분배 구조를 제안할 것이며 제안하는 구조는 사용자 인증, 패치 검증, 패치 자동분배 및 설치 등의 다양한 메커니즘을 가진다. 이렇게 제안된 패치 분배 구조는 도메인내의 패치 분배 과정에 있어서의 보안성을 더욱 향상시킬 것이다.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.913-917
• /
• 2007

The turbocharger for a vehicle is consisting of a centrifugal compressor and turbine. These compressor and turbine are vibrating and emitting noises through the T/C body, exhaust system (Catalyst, Bellows, Pipe, etc) and Intake system (Hoses, Intercooler pipes, Intercooler) as rotating. A turbocharger cold test bench is constructed to reduce these noises, especially for the purpose of realizing transient operating environment and oil temperature control to simulate the vehicle operating characteristics with intake system and exhaust system. This research laid the groundwork to develop a lower noise level T/C through understanding the mechanism of the noise source of T/C.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.595-600
• /
• 2007

This paper presents a new jetting dispenser driven by a piezoelectric actuator at high operating frequency to provide very small dispensing dot size of adhesive in modern semiconductor packaging processes. After describing the mechanism and operational principle of the dispenser, a mathematical model of the structured system is derived by considering behavior of each component such as piezostack and dispensing needle. In the fluid modeling, a lumped parameter method is applied to model the adhesive whose rheological property is expressed by Bingham model. The governing equations are then derived by integrating the structural model with the fluid model. Based on the proposed model, dispensing performances such as dispensing amount are investigated with respect to various input trajectories.

• 전자공학회논문지B
• /
• 제31B권3호
• /
• pp.1-13
• /
• 1994

In this study under the distributed system for efficient distribution resource completely symmetic global scheduler was designed and implemented to obtain the general global scheduler, that is load balancing as sharing objectives. To balance the system's load efficiently each node must be designed to get right decision-making. Thus we considered computing time to estimate fault such as delay on communication network, communication period and other decision-making. Load balancing mechanism which suggested in this study was implemented in the distributed system which IBM PC/AT linked to and composed with Ethernet. The target operating system was composed of IBM PC/AT as a basic construction in which proper type of UNIX operating system were ported and communication layer chose communication type implemented from Amoeba. The method of IPC employing layered multilevel access method to avoid inefficient protocol using direct communication mode guarantees rapid response due to short ready time for IPC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1301_1302
• /
• 2009

Recently, there has been increased incessantly an interest in research area on micro-fluidic pump for electronic and biological applications. The proposed pump takes an unobtrusive operation into the simple displacing mechanism using peristaltic traveling waves without the physical moving valves. And, this piezopump makes up a panel type design. The ATILA simulation was performed to estimate the operating frequency of the vibrating wave mode, to optimize the design conditions of piezopump such as structure, elastic body material, piezoelectric ceramics, and to analyze the distribution of vibration displacement. The best measured value of the pumping rate is about $118{\mu}l$/min under the following parameters : 4-wave mode, 50kHz operating frequency, $200V_p$.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.15-18
• /
• 1996

Shewhart control chart is a basic technique to monitor the state of a process. We observe observations of a group of size four or five in a rational way and plot some statistics (e.g., means and ranges) on the chart. When setting up the control chart, the control limits are calculated based on preliminary 20-40 samples, which were supposedly obtained from stable operating conditions. But it may be hard to believe, especially at the beginning of constructing the chart for the first time, whether the process is stable and hence all samples were generated under the homogeneous operating conditions. In this report we suggest a mechanism to obtain robust control limits under self-criticism. When outliers are present in the sample, we obtain tighter control limits and hence increase the sensitivity of the chart. Examples will be given via simulation study.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.192-197
• /
• 2007

This paper presents Hybrid PI controller of IPMSM drive using fuzzy adaptive mechanism(FAM) control. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness, fixed gain PI controller, Hybrid PI controller proposes a new method based self tuning PI controller. Hybrid PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.