• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.60-74
• /
• 2020

A Podaegi is a square cloth used to carry a baby. Podaegi was an essential necessity for raising baby. However currently Koreans prefer baby-carriers, baby hip-seats, and equipments other than Podaegi. Recently, Podaegi is becoming popular around the world. Therefore, it is necessary to study Podaegi to inform Korea's traditional parenting culture product. In this research, 230 images of Podaegi were collected from paintings, photographs, postcards, films and artifacts from the late 18th century to 2000. The period of study was divided into three phases from the late Joseon Dynasty to before the opening of the port, from the opening of the port to before the liberation, and from the liberation to 2000. Types of Podaegi were categorized according to its shape and how to use. Transition process of Podaegi was examined. Podaegis were categorized into band type, blanket type, combination type, cheone type, modern type, and so on. From the late Joseon Dynasty to before the pre-openings, band type was used. From the opening of the port to liberation, all types of Podaegi appeared. Since the liberation, the use of band and blanket type has gradually decreased. Modern types have been the most popular since the 1960s. Materials of Podaegi became varied and Podaegi became a fashion-item. Later, modern Podaegi became the representative form of Korean traditional Podaegi.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.131-136
• /
• 2002

A design system of dies for hot extrusion of structural shapes such as Z's, L's, T's, U's and H's from aluminium alloys was developed in this study. The developed design system of dies is based of estimated die design rule system. The design rules for die design are obtained from the handbooks, plasticity theories and relevant references. The environment of the system is AutoCAD and AutoLISP, the graphic programming language was used for the configuration of the system. This system includes five major modules such as section shape design module, die opening number module, die opening layout module, die correction module and die bearing design module that are used to determine design variables. This system would be used to design of dies for hot extrusion from aluminum alloys and widely used in manufacturing course.

• Journal of ILASS-Korea
• /
• v.21 no.1
• /
• pp.20-28
• /
• 2016

This paper presents an experimental study on the GDI injector with Bosch method. The injection characteristics, such as the injection quantity, the injection rate, the maximum velocity of the nozzle exit and the injection delay were studied through the change of the injection pressure, the tube pressure and energizing duration in injection rate measurement device using nheptane. The injection quantity is increased by increasing injection pressure, decreasing tube pressure or increasing energizing duration. As the difference of the injection quantity changed, the shape of injection rate was moved with a constant form. The maximum velocity of the nozzle exit showed a tendency to increase as the injection pressure is increased. However, tube pressure did not affect. Overall, it was confirmed that the closing delay is longer than the opening delay in all conditions. As the injection pressure increased, the result has a tendency to decrease the closing delay, it did not affect the opening delay. Reduction of the closing delay showed the reduction of the injection duration. the tube pressure and energizing duration did not affect the injection delay (opening delay, closing delay).

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.478-491
• /
• 2013

Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular, elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2021

Recently, many structures using lightweight materials have been developed. This study was conducted by using Al6061-T6 and carbon fiber reinforced plastic (CFRP), two common lightweight materials. In addition, the failure characteristics of an interface bonded between a single material and a heterogeneous bonding material were analyzed. The specimens bonded with CFRP and Al6061-T6 were utilized by the combination of the heterogeneous bonding material. The specimens had a double cantilevered shape and the bonding between the materials was achieved by applying a structural adhesive. The experiments were conducted in opening mode: the lower part of the samples was fixed, while their upper part was subjected to a forced displacement of 3 mm/min by using a tensile tester. Under the tested amount of strength, energy release rate, and considering the specimens' fracture characteristics in opening mode, the specimen "CFRP-Al" presented the maximum stress, followed by "Al" and "CFRP". We can hence conclude that the inhomogeneous material "CFRP-Al" is useful for the construction of lightweight structures bonded with structural adhesive.

• Composites Research
• /
• v.20 no.4
• /
• pp.31-41
• /
• 2007

Dome shape design methods of Filament Winding (FW) composite pressure vessel, which can suggest various dome contour according to the external loading conditions, were investigated analytically and numerically. The performance indices(PV/W) of the pressure vessels with same cylinder radius and boss opening but different dome shape were evaluated by finite element analysis under the internal pressure loading condition. The analysis results showed that as the dome shape becomes flat, the performance index decreases significantly due to the reduced burst pressure. Especially, for the case of the high value of the parameter ro, the ratio between the radii of the cylinder part and the boss opening, the flat dome is disadvantageous in the aspect of the weight reduction, and additional reinforcing dome design technique should be required to increase the burst pressure. For example, above ro=0.54 condition, the dome shape change according to the loading condition could cause the low burst pressure and increase of composite weight in dome region and is not recommendable except for the special case that maximum inner volume or sufficient space between skirt and dome is the primary design objective. However, at ro=0.35, the dome shape change brings not so significant differences in the performance of FW vessel.

• Journal of the Korean Society of Costume
• /
• v.52 no.6
• /
• pp.51-69
• /
• 2002

The purpose of this study was to classify the body shapes. exclusive of size and corpulence factors of more than 60-year old elderly women by distinctions, and to investigate the visual effects of combination of ensemble suit details. For the body shape classification, the factor analysis and cluster analysis were performed : the mean value difference of numeral values for classified types were tested by ANOVA : and the follow-up test was conducted by the Duncan's multiple ranged test. The data analysis for visual effects evaluated by a multiple ranking test was analysed by mean. paired t-test, ANOVA and Duncan's multiple ranged test. The results are summarized as follows : 1. The followings are the types of body shape according to the shape factors of the front line of body for elderly women. The distinctions of the front li e of elderly women's body could be presumed; that was, Body typeⅠ was a comparatively well-balanced body type, Body type Ⅱ was close to an average body type. and Body type In was a severely corpulent body type. 2. The followings are the results on the physical visual effects inducing the constituents of clothing type. 1) The neckline·collar types of a jacket have a great influence on the visual effects of the upper body, and orderly. the tailored collar. soutien collar, and round neckline had positive influence on the visual effects in the upper body. 2) The pleat types of one-piece dress had positive influence on the visual effects in the lower body in the order of gored type, pleats type, and gathered type. Also. the balance in the lower body had more influence on the overall balance of the clothing compared to the constituents of clothing type such as neckline collar type or opening line. 3) It showed that whether there is the front opening line of a jacket influenced on the visual effects of all categories.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.25-41
• /
• 1997

The purpose of this study was to observe mandibular condyle shape and position in an asymptomatic population. In order to carry out this study, 142 temporomandibular joints in 71 adults(35 males, 36 females), who were asymptomatic for temporomandibular joint disorders and had no history of prosthodontic or orthodontic treatments, were selected, and radiographed using the Accurd-200 head holder(Denar Co., U.S.A) for transcranial radiograms and the Sectography(Denar Co., U.S.A) for lateral individualized corrected tomograms. Mandibular condyles were classified morphologically and evaluated in positional relationships with articular fossae and articular eminences at centric occlusion and 1 inch mouth opening. The obtained results were as follows; 1. In the classification of mandibular condyle shape, the convex type was more prevalent in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 2. In the mandibular condyle position at centric occlusion, the mandibular condyles were placed posterior to the center of articular fossae in transcranial radiograms and anterior to the center of articular fossae in tomograms taken at medial, central, and lateral locations. 3. In the mandibular condyle position in right and left TMJs at centric occlusion, the mandibular condyles were placed bilateral asymmetric relationships to the articular fossae in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 4. In the mandibular condyle position at 1 inch mouth opening, the mandibular condyles were placed anterior to the articular eminences in transcranial radiograms and tomograms taken at central location and posterior to the articular eminences in tomograms taken at medial and lateral locations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.546-554
• /
• 2011

Near targets in the infrared (IR) images have the steady feature for inner region and the transient feature for the boundary region. Based on these features, this paper proposes a new method to extract the fine target shape of near targets in the IR images. First, we detect the boundary region of the candidate targets using the local variance weighted information entropy (WIE) of the original images. And then, a coarse target region can be estimated based on the labeling of the boundary region. For the coarse target region, we use the opening filter with an adaptive structure element to extract the fine target shape. The decision of the adaptive structure element size is optimized for the width information of target boundary by calculating the average WIE in the enlarged windows. The experimental results show that a proposed method has better extraction performance than the previous threshold algorithms.