• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1028-1034
• /
• 1999

Poly(lactic acid) is expected to be one of the most promising biodegradable polymers. However, the high molecular weight polymer could be obtained by ring-opening polymerization process conventionally, which raises the production cost and decreases the final yield. In this study, linear and star-shaped poly(L-lactic acid)s were prepared by direct solution polycondensation method and their physical and thermal properties were examined. Tin compounds were found to be effective catalyst for the preparation of high molecular weight polymers. When 0.2g (0.5 wt % of monomer) of $SnCl_2$ and 100 mL of p-xylene were used, the polymer yield and molecular weight were relatively high. As a means to obtain higher molecular weight polymer easily in the direct polycondensation system, dipentaerythritol(dipet) or pentaerythritol(pet) was introduced as a multifunctional branching monomer to provide a star-shaped poly(lactic acid). Moderately high molecular weight polymers with the inherent viscosity values up to 1.14 dL/g(weight-average molecular weight of about 140000 by GPC) were obtained and could be cast strong and transparent films.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.8 no.1
• /
• pp.5-11
• /
• 1997

To set up an objective basis for the evaluation of the stroboscopic findings, video-strobolaryngoscopic images of vocal fold vibration in 5 female and 5 male normal speakers were analyzed using an image analysis computer program called KSIP(Kay Storoboscopy Image Processing, Kay Elemetrics Corp., NJ, USA). Four consecutive vibratory cycles were compared in comfortable, louder, high-pitched /ee/ phonation for every subject. findings mostly replicated earlier studies including glottal chinks which were observed in most female speakers throughout the cycles and clear distinction between female and male speakers in their vibratory patterns as well as intensity and frequency-re-lated differences. However, there were some findings incompatible with those from previous studies which may be attributable to technical problems. This study may provide an objective basis of the stroboscopic findings such as image shape, amplitude, area, and their changes according to frequency and intensity variations. We anticipate that funker study with larger samples ran provide an objective criteria for normal vibratory characteristics of the laryngostro-boscopic findings.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2011

The functional loot orthoses, when wearing shoes, are in the direct contact with bottom of foots to improve and recover the correctness of abnormal lower limb musculoskeletal imbalance and the primary role of foot and also, it can act to keep the balance and weight of body and support the weakened region, so that it is very helpful to keep body balance for the standing position. In this paper, it was researched that foot orthoses which is accommodable for the function of impact absorption including the gait stability affect on the balanced performances of body in according to the formation and the material of foot part. Taking into account the balanced performances by using the sway velocity, the estimation and comparison of the effects on the balanced performances by each formation and material for foot orthoses was evaluated into significant values(p<0.006) in only the eye-opening posture with Firm state, In this posture, the static process performed by each foot formation reveals in order of normal foot(p<0.010), flat foot(p<0.000) and hollow foot(p<0.003) and then, on the base of each formation of foot part, the result that analyze the effects of the materials of foot orthoses on the balance performance appeared showing that soft materials is more effective on the normal foot and, on the other hand, rigid materials is more effective in balancing on flat foot and hollow foot.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.178-185
• /
• 2008

Living donor liver transplantation is increasingly performed as an alternative to cadaveric transplantation. Preoperative screening of the donor candidates is very important. The quality, size, and vascular and biliary anatomy of the liver are best assessed with magnetic resonance (MR) imaging or computed tomography (CT). In particular, the volume of the potential graft must be measured to ensure sufficient liver function after surgery. Preoperative liver segmentation has proved useful for measuring the graft volume before living donor liver transplantations in previous studies. In these studies, the liver segments were manually delineated on each image section. The delineated areas were multiplied by the section thickness to obtain volumes and summed to obtain the total volume of the liver segments. This process is tedious and time consuming. To compensate for this problem, automatic segmentation techniques have been proposed with multiplanar CT images. These methods involve the use of sequences of thresholding, morphologic operations (ie, mathematic operations, such as image dilation, erosion, opening, and closing, that are based on shape), and 3D region growing methods. These techniques are complex but require a few computation times. We made a phantom for volume measurement with pig and evaluated actual volume of spleen and liver of phantom. The results represent that our semiautomatic volume measurement algorithm shows a good accuracy and repeatability with actual volume of phantom and possibility for clinical use to assist physician as a measuring tool.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.209-240
• /
• 1992

The costume of any nation is an attribute of a culture. This study concerns chinese and Mongolian costume's 'collar' form according to the observation of some reports about import folk materials and the pictures of the genuine objects, the author has investigated and rearranged them focusing on 13th Century's. 1. Traditional OverCoat or National costume on the poing of won dynasty in china such as Jacket, Coat, Mantle for making classical matching color, lacing, pearl pieces, and all costume shall be properly decorated and disigned. The example, Chinese Women's Gown and Double Jacket, on top of alignment of plaid, focus shall be placed on chinese classical form and color-matching, such as flowers and bireds, butterflies, made wishing ornaments, which shall be either hand painted or embroidered on collars, fronts, sleeves openings, and lower portion of gown. 2. Mongolian Costume, the stone status of a person, are seen at the territory of the Republic of Mongolia was a powerful country of Asia. So during the Mongolian Empire a lot of Missions from many countries came to kharakorom for establishing official relations between Mongolia and a country represented by mission. In particularly, the costume of mongols on the point of Chinggis khan Empire which the upper clothes in cluded ; a several kinds of the Caftan as compared with in Korea as to material (Silk caftan, Cotton Caftan, Fur Caftan) with closing to the right due to overlapping and Stand-up-Shawl Collars will pancho style & Round or V Neckline. 3. As compared with in Korea it is said that this a sort of Simui was brought in prior to the middle of Koryeo dynasty. Korean Simui system was complied with chinese system through confucian domestic behaviour. This was respected for court dress of confucian scholars, as it was, Chumri can ordinary dress of schloars) and Hakchangui ( a uniform of confucian student). Generally its form or shape of the outer lapels of Korean jacket were used together Squar-Tray-Collar. In late Yi-dynasty the inside collar length was longer than the outside collar length and the width of the collar was gradually narrow. And so the Traditional costume's outer collar of Jacket and OverCoat became small while the width and length of breast-tie became large. The same thing as the form of the collar on these days had been appeared by the design method or adjust one's dress. Therefore the form of collar in the china and Mongolian Traditional OverCoat & National Costume is fix arranged according to Stand up Collar, Without Collar, Clothing to the Right, Central opening, Horizontal Row of Button with Round or V Neckline and so on.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.325-334
• /
• 2006

Understanding the airflow characteristics within the canopy structure installed between closely adjacent tunnels either for light adaptation or for protection from snow hazards is required for the normal ventilation as well as safety system design. Grade, horizontal alignment, cross-sectional area and shape are known to substantially influence the fire smoke behavior and their influences raise great concern for the safety design. This paper aims at studying the effects of tunnel geometrical characteristics and canopy installation on the ventilation and fire propagation through CFD analysis. In the case of 145m long canopy, 50% opening ratio is preferred with respect to the airflow pattern and ventilation efficiency. When a 20MW fire occurs in a 1.8km-long tunnel and four 1250mm reversible jet fans are instantly turned on, smoke concentration at 40m downstream of the fire decrease 13% for the upgrade tunnel with 2% gradient and increases 20% for -2% gradient, compared to the standard horizontal tunnel. Backlayering is observed within 45m-long segment toward the entrance in 2% down-graded tunnel. In a rectangular tunnel, there is no significant difference of smoke concentration as well as velocity profile from the standard crown tunnel. Three-laned tunnel shows lower level of both profiles and backlayering is detected up to 50m upstream of the fire, while the risky situation rapidly disappears thereafter.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.224-228
• /
• 2012

A new $Saxifraga$ $fortunei$ cultivar 'Crystal' was bred by crossing 'Dotaerang' with light pink and light Green (RP 58D) colored petals and 'Rocksun' with light pink and light green white (RP62A + GW157A) colored petals. The selection and flower characterization were conducted from 2004 to 2007 in a greenhouse of the National Institute of Highland Agriculture. The flowering of 'Crystal' occurred from September 21 for 31 days. The number of flowers per plant was 279.0 with many flowering habit. The flower coloration was mixed light pink and green white (RP62D + GW157B) at the opening. The number of petals were 7.0, with a width of 2.1 cm and length of 1.8 cm. The plant height was 15.3 cm and number of leaves was 133.7. 'Crystal' cultivar can be used for pot flower. Fifty percent shading is a good cultural practice against direct sunlight and soft rot disease would occurs usually by over-irrigation. 'Crystal' cultivar was registered as a new variety with No. 3466 at Korea Seed and Variety Service in April of 2011 year.

• Journal of architectural history
• /
• v.8 no.3 s.20
• /
• pp.23-38
• /
• 1999

The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

• Journal of Labour Economics
• /
• v.26 no.2
• /
• pp.1-30
• /
• 2003

The recent experience about self-employment shows three main trends: first, its share out of the total workers has steadily increased, recording 37.6% in 2001, implying its prevalence and importance; second, its share out of male workers has caught up female workers', implying its importance to males as well as females; and finally, during the recent Economic Crisis when there was mass layoff and large scale bankruptcy, its share rapidly increased, reflecting its role of a buffer to economic fluctuation. However, there have been few studies on self-employment, mainly focusing on what makes someone choose it as an alternative to being employed. This study analyzes the determinants of the duration to terminate self-employment, by applying the proportional hazard model to the Korea Labor and Income Panel Survey(KLIPS) by the Korea Labor Institute. The KLIPS started the first wave in 1998 with the 5,000 household sample (and about 12,000 individual sample of household members aged 15 and more). In this study, the first four waves are used for analysis. The average duration of 5,357 spells of self-employment is 130 months. It shows slight difference between males(124 months) and females(138 months) while it widely ranges over industries (296 months for agriculture industry while 50 months for restaurant and hotel industry). Estimates of the proportional hazard model of the self-employment duration show that females are more likely to terminate self-employment while it is not statistically significant. The effect of age at starting self-employment on the hazard shows the inverse V-shape, which implies that, until a certain age(47 years), the hazard become higher as aging while, since then, it become lower as aging. The level of education has a positive effect on the hazard, implying that more education is related to the higher probability to be employed. The measures of economic performances, annual sales and earnings, are positively related to continuing self-employment while hardship at the start of self-employment measured by several ways has a negative effect. Training before opening business has a positive effect on keeping on self-employment and its effects are different over its providers, significantly positive for public providers while insignificant for private providers. More and further research on self-employment is urgent in the rapidly ageing society. To help workers to be self-employed, more public assistance is necessary for education, training, financing, marketing, management, and human resource management in order to make the olders consider self-employment as a good alternative rather than an inevitable one.

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.398-407
• /
• 2005

The present study was conducted to examine the morphometrics and function of the disk on both sides among patients with facial asymmetry (FA) and to elucidate plausible correlations between internal derangement (ID) and FA. The sample was composed of 10 males and 27 females with FA. The disk status of all subjects was evaluated by bilateral high resolution magnetic resonance scans in the sagittal (closed and open) and coronal (closed) planes. Five types of disk displacement were identified accordingly. The disk function was diagnosed as normal disk function, disk displacement with reduction, and disk displacement without reduction. The disk shape on sagittal MRI in closed position was classified as bi-concave, biplanar, funnel/hemiconvex, and deformed. The disk position, translation and rotation were also measured. The difference between the shifted side and non-shifted side was analyzed by statistical analysis. Approximately $70\%$ of the patients in the present study showed unilateral or bilateral ID. It was found that anterior disk displacements (ADD), especially rotational ADD, occurred more frequently in the shifted side, while normal disk position was observed mainly in the non-shifted side (p<0.01). The disk of the shifted side showed significantly deformed configuration and inferior-anterior disk position. However, the disk of the non-deviated side showed hyper-mobility during jaw opening movement. These results demonstrate that in FA patients, the disks status of the shifted side is different from that of the non-shifted side, a phenomenon that could be correlated to facial asymmetry.