• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.2
• /
• pp.189-199
• /
• 2010

This study develops a coverall design for the body shape and movement of infants. This research analyzed these processes: 1. The current coverall styles preferred for infants. 2. The appropriate products for the real size, body shape, movement, and fit of infants. 3. The observations of the 6 months to 9 months movement and development of infants. 4. The design and creation of a new coverall base in this study, and to check the suitable test the developed coverall design for the infant. The result of this study are: A coverall for infants that lie or crawl on the floor must avoid opening in the center front and a gore has to be added at the crotch of the pants for the better movement of infants. These ways provide infants a neat appearance and easy movement. The test of developed designs shows that the developed coverall design covers the size gap of the trunk loop according to the growth of the infant and the movement of the legs; in addition it provides a positive aesthetic effect. The waistline in the developed coverall (a waistline that should exist lower than the body waistline of the infant) can reduce seam stress because the pressure of the seam line can be absorbed in a dipper. It is one of the suitable design points for infants lying prone all day long in this study.

• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.93-108
• /
• 1998

In this study, the analytic solutions and numerical methods were used to estimate the shape and size effects on the stability of underground openings. The stability of underground openings was evaluated by scrutinizing the effects of the rock mass quality, the state of in-situ stresses and the lateral earth pressure coefficient on the displacement, the stress concentration and the plastic region developed in the vicinity of the openings. The analytic solutions have shown that the stress concentration factor is inversely proportional to the radius of curvature of openings. Through parametric study on the various shapes and sizes of underground openings the characteristics of the controlling factors concerned with the stability were analyzed. Then, the study was extended to the horseshoe-shaped openings commonly used for under ground storage. Through the extended study the effects of the stress ratio and the height-towidth ratio of openings on the maximum displacement and plastic region developed around the openings were estimated. The results have shorn that the height-to-width ratio of domestic storage caverns can be increased economically without stability problem, as far as the lateral earth pressure coefficient is appropriate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.783-788
• /
• 2002

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face Image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives md vowels.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.165-171
• /
• 2017

This paper proposes a method of support-generation using morphological image processing instead of geometric calculations. The geometric computational cost is dependent on the shape, but our method is independent on the shape. For obtaining the external support area for extrusion shape, we represents morphological operations between two sliced layer images and shows results of each operation stages. Internal support area is evaluated from erosion and opening operations with the sliced-layer image. In these support areas, the supporter image is generated using the designed support structures. Also, we made a DLP printer and the STL model included supporter-structure is printed by the DLP printer. We confirmed the necessity of support-generation method with the support structures individually dependent on materials by looking at the printed results.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.155-159
• /
• 2004

This work reports the theoretical and experimental investigations of capillary bust valves to regulate liquid flow in microchannels. The theoretical analysis uses the Young-Laplace equation and geometrical considerations to predict the pressure at the edge of the valve opening. Numerical simulations are employed to calculate the meniscus shape evolution while the interface is pinned at the valve edge. Microchannels and valves are fabricated using soft lithography. A wafer-rotating system, which can adjust the driving pressure by rotational speed, induces a liquid flow. Experimentally measured valve-bursting pressure agrees with theoretical predictions.

• Structural Engineering and Mechanics
• /
• v.30 no.3
• /
• pp.317-330
• /
• 2008

Stress intensity factors for a planar crack parallel to a bimaterial interface are considered. The formulation leads to a system of hypersingular integral equations whose unknowns are three modes of crack opening displacements. In the numerical analysis, the unknown displacement discontinuities are approximated by the products of the fundamental density functions and polynomials. The numerical results show that the present method yields smooth variations of stress intensity factors along the crack front accurately. The mixed mode stress intensity factors are indicated in tables and figures with varying the shape of crack, distance from the interface, and elastic constants. It is found that the maximum stress intensity factors normalized by root area are always insensitive to the crack aspect ratio. They are given in a form of formula useful for engineering applications.

• English Language & Literature Teaching
• /
• v.11 no.4
• /
• pp.167-187
• /
• 2005

This paper tries to follow Toni Morrison's postcolonial courses in her novels. In The Bluest Eye, Morrison examines the situation in which the white's values are the standard for the whole society through two little black girls, Pecola and Claudia. In Song of Solomon she recommends emulating Pilate's love and good attitude towards tradition to shape a positive identity for Afro-Americans, which Milkman comes to accept. In Tar Baby, Morrison suggests that Son's and Jadine's ideas, traditional and modern, should be combined. In Beloved, Morrison illustrates one of the ways in which all blacks can escape from their own trauma through Sethe's process of finding her self-worth. In Paradise Morrison shows that the real de-colonial way to overcome the effects of colonization is to create a new paradigm in which everyone is respected regardless of race. In her works, Morrison insists that by remembering and regretting slavery in America, people can overcome its aftereffects and trauma. Racial oppression still exists today, so Morrison will continue her beautiful, powerful and eye-opening work.

• Journal of ILASS-Korea
• /
• v.1 no.1
• /
• pp.55-62
• /
• 1996

In a fuel injection engine, atomization of liquid fuel and mixture formation process has influenced(or affected) directly on the engine performance and pollutant emission. In this study, the characteristics of fuel spray and the behaviors of secondary atomization developed at the downstream of the valves were investigated using an image processing method. Solid and perforated valves are chosen in order to evaluate the valve performance in terns of air flow rate, valve opening angle and valve shape. Experimental results clearly indicate that the spray atomization quality can be improved by increasing the perforated rat io and the blockage rat io in the perforated valve, the characteristics of spray atomization is improved by using the perforated valve with high perforated rat io and blockage ratio.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.237-243
• /
• 1997

Numerous variables affect product cooling rate of pressure cooling system for fruits and vegetables. These include carton vent area, initial and desired final product temperature, flow rate and temperature of the cooling air, product size, shape and thermal properties and product configuration(whether in bulk or packed in shipping cartons). This study was carried out to determine the influence of each of these variables as they affect cooling time. The opening ratio and number of the vent hole were recomended as 4∼10% and 2∼4ea., respectively, for a minimum alt flow resistance and for a uniform air flow pattern. In the cooling experiment for tomatoes and mandarins, optimum air flow rate was 0.04 m3/min.kg in terms of energy saving. The cooling air temperature should be about 2$^{\circ}C$ less than the desired final product temperature for reducing cooling time.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.745-749
• /
• 1998

Mathematical morphology (MM) has been introduced as a powerful tool for studying the geometrical properties of images, MM is a good approach to digital image processing , which is based on the shape feature. The MM operators such as dilation, erosion, closing and opening have been applied successfully to image noise reduction. The MM filters can easily filter the noise when the noise factors are known. However it is very difficult to reduce the noise when images are ambiguous, because the boundary between the noise and object is vague. In this paper, we propose a new method to reduce noise from ambiguous images by using Fuzzy Mathematical Morphology (FMM) operators. Performance evaluation via simulations show that the FMM filters efficiently reduce the image noise. Furthermore, the FMM filters show a good performance compared with the conventional filters.