• 건축역사연구
• /
• 제24권6호
• /
• pp.35-44
• /
• 2015

The purpose of this study is to critically investigate the ways in which scholars and architects in Korea have theorised the tradition in Korean architecture from the early 20th century to the present. After opening the door to foreign powers, the most important issue to be resolved in Korea architecture has been the modernization of the traditional architecture. The successful modernization of Korean traditional architecture depends on successful theorization of the tradition. However, many attempts to theorise the uniqueness of tradition in Korean architecture had not been instrumental to the modernization of Korean traditional architecture. The reason why they were not successful lies in the lack of philosophical and methodological reflection upon how to approach the tradition. They were either trapped in ambiguous essentialism without systematic methods and theories, or simply inventing the tradition from the vantage point of the present. This paper argues that in order to theorise the tradition, one need to translate the tradition into contemporary architectural vocabularies. What is important in translating the tradition is not to directly apply contemporary concepts and perceptual frame of architecture to traditional architecture but to find the gaps and differences between the two. This will open hermeneutic spaces to translate the tradition into useful principles and vocabularies of comtemporary architecture.

• 설비공학논문집
• /
• 제5권2호
• /
• pp.94-101
• /
• 1993

Recently, efforts of decreasing energy consumption are continously increased and user's preference is also diversified in refrigeration and air conditioning systems. Thus, in order to satisfy these demands, high efficiency, high intelligence, and energy saving for those systems are essential. As the basic study for diverse functions and intelligence of those systems, we investigated the response characteristics through the compressor capacity control concerned with superheat and refrigeration room temperature. And, response characteristics are investigated experimentally by using micro computer based PWM inverter control method. Experimental result of the conventional on-off control method is given in order to be compared to the results of inverter control method. The results obtained through this study are summarized as follows. It is shown from the experimental results of the on-off control method that the range of temperature variation around the steady state ($-18^{\circ}C$) is very large (about $7{\sim}8^{\circ}C$) and the settling time bringing the steady state is not found. In the inverter control method, we can see that the refrigeration room temperature after reaching the setting temperature is very stable without fluctuation and a robust control for disturbance such as opening the door has been realized.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.14-20
• /
• 2011

건축물이 고층화되면서 피난을 위한 주요 시설인 피난계단에서는 수직적 구조로 인해 연돌효과의 영향이 크게 발생하고 있다. 동절기에 연돌효과로 인한 계단실의 압력상승으로 피난문을 열고 대피하는데 어려움이 있고, 피난계단의 연기안전을 위한 급기가압 제연시스템의 운전성능에 교란이 발생되기 때문에 피난계단에서의 연돌효과를 저감시켜야 더욱 안전한 대피환경을 제공할 수 있다. 본 연구에서는 고층 건물에서의 현장실험을 통해 피난계단에서의 연돌효과를 저감시킬 수 있는 방안을 도출하였고, 네트워크 모델을 사용한 수치해석을 수행하여 정량적이고 상세한 설계방안을 제시하였다. 현장실험 결과 피난계단의 저층부에서 피난계단으로 공기가 급기되고 고층부에서 피난계단의 외부로 공기가 배기되도록 공기의 흐름을 생성시켜 준다면 고층 건물의 피난계단에서의 연돌효과가 저감될 것으로 예측된다.

• 한국주거학회논문집
• /
• 제18권5호
• /
• pp.45-52
• /
• 2007

The demographic profile of the households will shift towards the 'older elderly'. There are need upgrading existing housing and new housing in aspect of floor plan, accessories, facilities and so on. The government should prepare the policy and standards of housing design for the aged and disabled in order to improving the residents' housing conditions. The purpose of this study is to compare Korean to foreign guidelines related to residential design for the elderly and disabled and find out the characteristics of our standards. It was accomplished by literature research. The results were as follows. There is disagreements between domestic standards over the clear door opening, the clear hallways and handrails at entrance. And the foreign standards are based on their wheelchair size, ours are founded on it's size which specified only maximum overall dimensions. So ours are seem to be lack of accuracy. Our standard of stairs is in details in comparison with other space components. But ours don't go into details than foreign ones over length of hand-rails, riser etc. And for recommendations denoting minimum and maximum height of various component, it should be preceded the specific survey on limits of reaching ability for the elderly and disabled.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.39-45
• /
• 1998

Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily opreated to open(extension process) or close (compression process) the doors because $N_2$ gas with high pressure and oil are charged in tube. Most of manufacturers are using the trial ＆ error method in order to decide its specification(reaction force, damping force), which tends to waste time and money. Therefore, gas springs have been improved by properly changing the control pressure of $N_2$ Gas with its mounting location and weight to maximize its effect and to minimize its space. Although it has been researched on damping structure to minimize impact which is applied to vehicle when its back door is fully opened, the characteristics of damping structure are not known clearly. There(ore, this paper will not only clearly define the effect of important factors(open ＆ close force)for gas springs through theoretical analysis but also provide optimum design specification through development of program to avoid traditional method of specification determination such as the trail It error method which is widely used in whole industries including automotive industry.

• Korean Circulation Journal
• /
• 제48권11호
• /
• pp.974-988
• /
• 2018

Embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs), which are collectively called pluripotent stem cells (PSCs), have emerged as a promising source for regenerative medicine. Particularly, human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) have shown robust potential for regenerating injured heart. Over the past two decades, protocols to differentiate hPSCs into CMs at high efficiency have been developed, opening the door for clinical application. Studies further demonstrated therapeutic effects of hPSC-CMs in small and large animal models and the underlying mechanisms of cardiac repair. However, gaps remain in explanations of the therapeutic effects of engrafted hPSC-CMs. In addition, bioengineering technologies improved survival and therapeutic effects of hPSC-CMs in vivo. While most of the original concerns associated with the use of hPSCs have been addressed, several issues remain to be resolved such as immaturity of transplanted cells, lack of electrical integration leading to arrhythmogenic risk, and tumorigenicity. Cell therapy with hPSC-CMs has shown great potential for biological therapy of injured heart; however, more studies are needed to ensure the therapeutic effects, underlying mechanisms, and safety, before this technology can be applied clinically.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.8-13
• /
• 2021

A plastic roller for opening and closing the safety door of the injection molding machine was molded. The dimensional change of the measurement position of the roller was studied when the cooling time was applied differently among the molding conditions, and when the temperature of the coolant applied for mold cooling was also applied differently. Cooling times of 300 seconds and 400 seconds, hot and low-temperature coolant were applied. When the low-temperature coolant was applied, the measuring point of the roller shrank by 0.03 mm. However, when the high-temperature coolant was applied, the measuring point shrank by 0.3 mm. It was found that the application of low-temperature coolant among coolants was more suitable for the reference dimension of the molded article compared to the application of high-temperature coolant. Among the cooling water applied for the molding of plastic rollers, when high-temperature coolant is applied, the shrinkage rate measured immediately after ejection was smaller than when low-temperature coolant is applied. However, it was found that post shrinkage, which occurs over time, occurs much larger when high-temperature coolant is applied.

• Structural Engineering and Mechanics
• /
• 제87권5호
• /
• pp.487-498
• /
• 2023

Unreinforced masonry (URM) buildings are extensively adopted in many of the growing nations, particularly in India. Window or door openings are required for architectural or functional reasons, which pose a threat to the building's safety. The past earthquakes have shown that the seismic capability of these structures was very weak. Strengthening these unreinforced masonry walls using welded wire mesh (WWM) is one of the most commonly and economical methods. The present experimental study investigates the impact of openings on the shear behaviour of URM walls and the effectiveness of WWM in enhancing the shear performance of masonry wall. In the experimental program 16 specimens were cast, 8 unstrengthen and 8 strengthened specimens, under 8 unstrengthen and strengthened specimens, every 2 specimens had 0%, 5%, 10%, and 15% openings and all these walls were tested under diagonal compression. The results show that the shear carrying capacity reduces as the opening percentage increases. However, strengthening the URM specimens using WWM significantly improves the peak load, shear strength, ductility, stiffness, and energy dissipation. Furthermore, the strengthening of the URM walls using WWM compensated the loss of wall capacity caused by the presence of the openings.

• 문화기술의 융합
• /
• 제7권2호
• /
• pp.419-425
• /
• 2021

이 연구는 패스파인더 시뮬레이션 프로그램을 활용하여 고속도로 휴게소에서 화재 시 피난 통로의 개수와 방향에 따른 피난안전성을 분석하였다. 또한, 시설물의 출입구를 2중 문으로 설치했을 경우와 단일 문으로 설치했을 경우를 비교하여 RSET 차이를 분석하였다. 1개의 출입구만을 개방했을 경우는 피난가능시간을 모두 초과하였다. 피난대책의 일반적인 원칙인 두 방향 이상의 피난 통로를 확보하기 위해 2개 이상의 출입구를 개방하였을 경우는 피난가능시간 안에 모두 대피하는 결과를 얻었다. 두 방향 이상의 출입구를 개방할 경우에는 서로 동일방향이 아니어야 RSET가 짧아진다는 것을 알 수 있었다. 2중 문 보다는 단일 문으로 출입문을 설치했을 경우 RSET이 단축된다는 결과를 얻었다. 또한 이 연구를 통하여 고속도로 휴게소의 RSET를 단축시키기 위해 첫째, 두 방향 이상의 피난 통로를 상시 확보할 필요가 있으며, 둘째, 두 방향 이상의 피난 통로는 동일한 방향이 되지 않아야 한다는 것과 마지막으로, 2중 문보다는 단일 문으로 출입구를 설치해야 함을 제안하였다.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.373-379
• /
• 2020

본 연구는 빌트인 양문형 냉장고의 도어를 최대개방각도로 열었을 때 발생하는 댐핑힌지의 응력해석과 피로수명 해석을 다룬다. 댐핑힌지의 초기설계안에 대하여 유한요소해석을 수행한 결과, 브래킷핀에서 상부원판과 원통이 직각을 이루는 기하학적 불연속 부위에서 국부적 응력집중이 발생하였고, 최대 von Mises 등가응력이 재료의 항복강도를 초과하였다. 이 최대응력 발생 위치는 시작품을 제작하여 수행한 도어개폐 내구시험 시에 파손된 브래킷핀의 부위와 일치하였으며, 응력해석 결과로부터 계산된 피로수명도 내구시험 결과와 정합성이 있는 것으로 나타났다. 브래킷핀의 초기설계 안에서 나타난 응력집중을 완화하기 위하여 브래킷핀의 형상을 변경하는 3가지 설계개선안을 도출하고 해석을 수행하여 안전성을 평가하였다. 설계개선안의 해석결과, 브래킷핀의 원판과 원통 사이에 필렛을 삽입하면 응력집중을 저감시키고 피로수명은 증가하는 것으로 나타났다. 또한 브래킷핀의 원판을 2단으로 변경하면 응력집중을 저감시키고 피로수명은 증가하는 것으로 나타났다. 결론적으로 가장 우수한 설계개선안은 브래킷핀의 원판을 2단으로 변경하고 반경이 큰 필렛을 삽입한 경우로서, 응력집중이 가장 작고 피로수명이 무한대인 것으로 판단된다.