• Journal of KIISE
• /
• v.45 no.3
• /
• pp.242-250
• /
• 2018

For high-quality software development, it is necessary to detect and fix the defects inserted. If defect management activities are not properly performed, it will lead to the project delay and project failure due to rework. Therefore, organizations need to establish defect management process and institutionalize it. Process standard models handle defect management in the area of project monitoring and control. However, small organizations experience difficulties in implementing and applying defect management process in a real situation. In this paper, we propose a defect management process for small organization which is designed in accordance with the characteristics of a small projects such as few participants and short development period. The proposed defect management process will be based on a tool chain with open source software such as Redmine, Subversion, Maven, Jenkins that support a defect management process and SW Visualization in systematic way. We also proposed a way of constructing defect database and various methods of analyzing and controlling defect data based on it. In an effort to prove the effectiveness of the proposed process, we applied the process and tool chain to a small organization.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.81-90
• /
• 2015

Purpose: The purpose of this study was to investigate any visible difference in shoulder stability muscle activity along the bending angle($70^{\circ}$, $90^{\circ}$, $110^{\circ}$) to perform the open kinetic chain(OKC) and closed kinetic chain(CKC) exercise. Method: This study was performed on normal 20 males subjects. Exercise was carried out in two ways OKC and CKC. Shoulder stability muscles are examined activity in the bending angles. In the OKC and CKC exercise to subjects with stretched out waist straightened, and than push forward the shoulder. Muscular activation was examined using the WEMG-8. Result: The results of this study were as follows. 1. Only in the trapezius muscle, it showed specific interaction between exercise methods and angles. When it comes to muscle activity, there was no significant difference in all muscles except for the anterior fibers of the deltoid muscle during both CKC and OKC exercise. 2. The average value of maximum muscle activity was significantly increased with increasing order of angles. But in CKC exercise, the muscle activity of infraspinatus tended to decrease with increasing angles. Conclusion: To summarize the research results, the muscle activity in upper fibers of the trapezius, anterior fibers of the deltoid, and serratus anterior was significantly different depending on the angle of the shoulder in both CKC and OKC exercise.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.238-244
• /
• 2020

Purpose: This study compared the effects of the fascial distortion model (FDM), foam rolling (FR), and self-stretching (SS) on the ankle dorsiflexion range of motion (ROM). Methods: Thirty subjects who had no more than 30° of ankle dorsiflexion ROM at the weight-bearing lunge test were recruited in this study. They were divided into three groups: (FDM, FR, and SS), and underwent each intervention for five minutes. Before and after the intervention, the ankle dorsiflexion ROM in the supine (the open-) and standing (the closed-kinetic chain) of the subjects were tested. The changes in the ROM between pre- and post-intervention and among the groups were analyzed. Results: All groups showed increased ankle dorsiflexion ROM after the intervention in both positions. In the position of the open kinetic chain, the changes in the ROM between pre- and post-intervention had significant differences among the groups, and the FDM was higher than the FR and SS. In the position of the closed kinetic chain, the ROM after the interventions and the changes in the ROM had significant differences among the groups, and FDM was higher than the FR (ROM after the intervention, the change in ROM) and SS (the change in ROM). Conclusion: These findings showed that FDM had more efficiency than the FR and SS as FDM had a stronger effect on increasing ankle dorsiflexion in a short, limited time. Clinicians who have limited time to treat their patients, particularly trying to increase ankle dorsiflexion ROM, should consider the application of FDM.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.1
• /
• pp.39-60
• /
• 2006

The value chain is analytically useful for the cultural industry that has the characteristics of both manufacture and service industry, as the focus of value chain analysis moves from manufacturing only to the other stages of activity involved in supplying goods and services to consumers. The aim of paper is to analyse the value chain of the cultural industry in Gyeongbuk, find out the strengths and weaknesses of it, and suggest the ways to enhance the innovation capabilities of cultural industry in Gyeongbuk. First, the firms in advertisement & marketing, and circulation & distribution have low percent in cultural industry and need the low level of human resource, but produce high value-added in value chain; so, we should facilitate the make-up of the firms in advertisement & marketing, and circulation & distribution. Second, we should strengthen inter-firm networks to facilitate the ex-change of the equipment, human resource, information and technology between them. Third, we should construct the system to development human resource with two levels and spread the open atmosphere of firms.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.229-239
• /
• 2015

In light of the significant increase in the quantities of goods transported and the development of the shipping industry, the frequency of usage of port structures has increased; yet, the government's budget for the shipping & port of SOC has been reduced. Port structures require systematically effective maintenance and management trends that address their growing frequency of usage. In order to construct a productive maintenance system, it is essential to develop deterioration models of port structures that consider various characteristics, such as location, type, use, constructed level, and state of maintenance. Processes for developing such deterioration models include examining factors that cause the structures to deteriorate, collecting data on deteriorating structures, and deciding methods of estimation. The techniques used for developing the deterioration models are multiple regression analysis and Markov chain theory. Multiple regression analysis can reflect changes over time and Markov chain theory can apply status changes based on a probabilistic method. Along with these processes, the deterioration models of open-type and gravity-type wharfs were suggested.

• Journal of Environmental Health Sciences
• /
• v.32 no.2 s.89
• /
• pp.126-131
• /
• 2006

The objective of this study was monitoring of genetically modified soybean by PCR and ELISA. We collected 60 soybean samples from the open markets located in Western Gyeongnam (Sacheon, Hamyang, Hadong, Sanchung, Uiryung, Geochang, and Hapcheon). A total of 60 soybeans was examined and 14 genetical modified soybean (GMS) were detected by PCR. The GMS rate of selling soybean in Uiryung, Hadong, Sacheon, and Hapcheon was 50.0%, 37.5%, 33.3% and 25%, respectively. The 7 of 14 GMSs were positive by ELISA and most of positive samples were below 3% GMS but 1 (Uiryung 1) of the positive samples was over the 3% which is maximum permit limit in Korea. These results mean that merchants of open market did not express for selling soybean mixed with GMS, so consumers did not recognize GMO. Therefore, we thought that education of GMO for merchant of open market need to recognize about GMO maximum permit limit.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.135-154
• /
• 2007

The 3 Northeast Asian countries of Korea, Japan and China have been stricter to each other than to other countries of out-region in air liberalization. The prominent reason of this intra-regional protective policy in air transportation seems to be the difference in competitive strength of their national flag carriers. As the 3 countries realize the importance of their mutual cooperation in the region, since China grows to be one of the leading economies in the world and the intra-regional trade and visitors increase tremendously, they are now taking the policy of intra-regional air liberalization more vigorously than before. Especially air cargo liberalization is easier than air passenger liberalization because they realize that the development of open economy is based on free flow of logistics regardless of the competitiveness of their national flag carriers. As Korea is the leading country in the region to promote air liberalization, this paper reviews the importance and growing trend of air cargo, analyzes current air liberalization policy between Korea, Japan and China and the initial effects of open sky in the routes of Shandung-Korea, and suggests the new policies of air liberalization to promote free flow of air logistics.

• Korea Journal of Hospital Management
• /
• v.19 no.3
• /
• pp.11-28
• /
• 2014

This study, targeting Korean tertiary hospitals and general hospitals, aims to analyze how value chain model in health and medical institution suggested by Duncan and else influences on hospital management. A survey was conducted to verify the actual proof analysis of this study model. 880 questionnaires were distributed to entire 88 hospitals and 739 copies were returned from 76 hospitals. This study mainly consists of three steps to analyze the effect value chain activity has on management performance of general hospitals. For the first step, we analyzed the effects service delivery activity has on management performance. For the second step, we analyzed the effects service support activity has on management performance and for the third, we analyzed the effects interaction between service delivery activity and service support activity has on management performance. The main results of this study are as follows. First, in terms of the management performance of scale, the factors which influenced on daily charge of outpatient were service activity before treatment, at the moment of treatment and value chain activity, while more important factors in daily charge of inpatient were organizational culture, organizational structure and value chain activity. In terms of management performance of quality, the factors which influenced on the first medical examination rate of outpatient were service activity before, at the moment of and after treatment, while activity at the moment of treatment, organizational structure, and value chain activity which is interaction were more important factors in average length of stay. In terms of non-financial performance, the management performance factors which influenced on job satisfaction were service activity at the moment of, after the treatment and value chain activity, while organizational culture, strategy resources and value chain activity which is interaction were more important factors in job commitment. Secondly, all the service support activity, service delivery activity and value chain activity had statistically significant effect on management performance. Among the three factors, service support activity had relatively high effect than others.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2010

The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.176-179
• /
• 2008

Amylose contents and amylopectin chain architecture of sorghmn and waxy sorghum starches were determined and compared with those of other common cereal and tuber starches. Also, in vitro digestibility of sorghum starch was estimated using a novel methodology. The absolute amylose content of sorghum starch was similar to that of com and wheat starches. The side chain length distribution patterns for sorghum and waxy sorghum amylopectin were very similar to those of com and waxy com, respectively. The $k_{cat}/K_m$ values for sorghum and potato amylopectin did not show a significant difference. The kinetic parameters could be used as novel indicators for starch digestibility.