• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1023-1029
• /
• 1998

Small water leak experiment was carried out for the 5Cr-1Mo steel specimen in sodium atmosphere. Perfect re-open time for the leak path of a specimen, by micro leak, was 129 minutes, and its size observed about 2 mm diameter at sodium side. The halos phenomena appeared around of leak spot before the leak path has re-opened, and the size of halos observed was different from the real re-open size of a specimen. Also, the corrosion of a specimen initiated from sodium side, but it did not occur at steam side. In AES analysis, the segregation phenomena of Cr in the specimen was found much more than those of other elements. And also, the sodium compounds formed by sodium-water reaction and deposited onto the leak site of specimen were observed by EPMA analysis and SEM photograph. It is postulated that the corrosion products could be precipitated to form mixed Na Fe Cr compounds.

• Wind and Structures
• /
• v.26 no.1
• /
• pp.11-24
• /
• 2018

Full-scale measurements of wind action on the open roof structure of the WuXi grand theater, which is composed of eight large-span free-form leaf-shaped space trusses with the largest span of 76.79 m, were conducted during the passage of Typhoons HaiKui and SuLi. The wind pressure field data were continuously and simultaneously monitored using a wind pressure monitoring system installed on the roof structure during the typhoons. A detailed analysis of the field data was performed to investigate the characteristics of the fluctuating wind pressure on the open roof, such as the wind pressure spectrum, spatial correlation coefficients, peak wind pressures and non-Gaussian wind pressure characteristics, under typhoon conditions. Three classical methods were used to calculate the peak factors of the wind pressure on the open roof, and the suggested design method and peak factors were given. The non-Gaussianity of the wind pressure was discussed in terms of the third and fourth statistical moments of the measured wind pressure, and the corresponding indication of the non-Gaussianity on the open roof was proposed. The result shows that there were large pulses in the time-histories of the measured wind pressure on Roof A2 in the field. The spatial correlation of the wind pressures on roof A2 between the upper surface and lower surface is very weak. When the skewness is larger than 0.3 and the kurtosis is larger than 3.7, the wind pressure time series on roof A2 can be taken as a non-Gaussian distribution, and the other series can be taken as a Gaussian distribution.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.781-787
• /
• 1997

In spite of the improvements of the techniques in the field of preventive dentistry, many children still present with extensive destruction of primary anterior teeth. Not only the practioner must consider the pulp state of the primary incisor, but also restore the form, function and esthetics of the tooth. Restorative treatment of primary incisor tooth requires durability, retention and esthetics. Stainless steel crowns used in restoring primary anterior teeth is retentive and durable in comparison with the composite resin, celluloid crown. But they are not esthetic. To enhance the esthetics of the anterior stainless steel crown without reducing its superior retention, an open-face stainless steel crown has been suggested. Several authors have suggested cutting away the labial portion of the stainless steel crown and placing the composite resin in that area. By following this technique, the practioner can prepare a retentive, durable, and esthetic restoration for primary teeth which have suffered from extensive loss of teeth structure. In addition, the single missing primary anterior teeth can be successfully restored by soldering the stainless steel crown together. Open-face stainless steel crown is indicated in the areas of large interproximal lesions involving incisal edge, crown fracture with pulp exposure and congenital malformation of the teeth. By this technique, the practioner can restore primary anterior teeth successfully regardless of the amount of remaining tooth structure, bruxism habit and presence of attrition. In this case, rampant caries with extensive loss of tooth structure and single missing of primary anterior tooth hart been successfully treated with open-face stainless steel crown.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.22-27
• /
• 2007

In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop split ring resonator (OLSRR) is presented for reducing the phase noise. For this purpose, the square-shaped split ring resonator (SRR) haying the form of the microstrip square open loop is investigated. Compared with the microstrip square open loop resonator, the microstrip square OLSRR has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power supply has the phase noise of $-120\sim-116.5$ dBc/Hz @ 100 kHz in the tuning range, $5.746\sim5.854$ GHz. The figure of merit (FOM) of this VCO is $-200.33\sim-197$ dBc/Hz @ 100 kHz in the same tuning range.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.460-475
• /
• 2016

The existing Proxy Mobile IPv6 suffers from a long handover latency which in turn causes significant packet loss that is unacceptable for seamless realtime services such as multimedia streaming. This paper proposes an OpenFlow-enabled proxy mobile IPv6 (OF-PMIPv6) in which the control of access gateways is centralized at an OpenFlow controller of a foreign network. The proposed OF-PMIPv6 separates the control path from the data path by performing the mobility control at the controller, whereas the data path remains direct between a mobile access gateway and a local mobility anchor in an IP tunnel form. A group of simple OpenFlow-enabled access gateways performs link-layer control and monitoring activities to support a comprehensive mobility of mobile nodes, and communicates with the controller through the standard OpenFlow protocol. The controller performs network-layer mobility control on behalf of mobile access gateways and communicates with the local mobility anchor in the Proxy Mobile IPv6 domain. Benefiting from the centralized view and information, the controller caches the authentication and configuration information and reuses it to significantly reduce the handover latency. An analytical analysis of the proposed OF-PMIPv6 reactive and proactive handover schemes shows 43% and 121% reduction in the handover latency, respectively, for highly utilized network. The results gathered from the OF-PMIPv6 testbed suggest similar performance improvements.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.197-202
• /
• 2007

This study focused on design and implementation of Mobile 3D Bluetooth Game Engine based on OpenGL-ES. In Mobile 3D network game so far, there is a form the mainstream of wireless inter-net game using WAP and VM. But, VM game we popular because of an excessive communication expense problem for this mobile network game that occur when connect to wireless internet as point out to problem by it, that is, stand-alone game are very popular. This study introduce a mobile 3D Bluetooth Game Engine which is based on mobile 3D standard using OpenGL-ES to solve a problem like mobile network game generally that occur when connect to take pleasure a wireless internet from some people into a short distance. When the number of concurrent packet datum by Bluetooth terminal transfers to each other, we shows that the proposed scheduling scheme for enhancing the process speed up on Bluetooth.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.2
• /
• pp.191-200
• /
• 2007

This study was designed to investigate the correlation between perceived TQM performance and organizational culture of dietitians. The objective of the study is to help the management of foodservice by providing a direction which will elevate perceived TQM performance of dietitians and presenting plans which will ensure effective dietitians. Questionnaires handed out to 308 dietitians worked in institutional foodservice operation including elementary, middle and high schools, hospitals, business and industries. In terms of TQM importance and performance, the more important dietitians perceived, the higher their performance level rose. Data form the IPA, external and internal customer satisfaction, executive ability, communication system and technology, information technology and application ability, food process, strategy, and leadership were required further improvement by dietitians. Of present organizational culture model, human relations model and open systems model were more likely to be adopted by dietitians in middle and high schools. According to the type of foodservice management, the open systems model was more preferred by dietitians from self-operated operations rather than respondents from contracted operations. Canonical correlation analysis between TQM performance and organizational culture showed canonical correlation to be higher (canonical correlations coefficient: .66). In conclusion, TQM performance-organizational culture showed higher canonical correlation. In the organizational culture, foodservice operation is capable of improving the aims for the rational goal model and the open systems model. The results showed that TQM performance and organizational culture had significant relationship, especially positive organizational culture emphasizing on internal process and rational goal model would have influence on TQM performance of dietitians. Foodservice operation, however, should recognize importance of open and development culture to improve dietitians' TQM performance. To apply open system foodservice organization should encourage dietitian and foodservice employees to challenge and compete for the works, Moreover, organizational effort such as information exchange program and support system should be established.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.281-284
• /
• 2008

Recently, Khronos institude OpenGL ES 2.0 API for support Shader 3.0 model that can possible variable graphic processing. For this reason, the mobile device have need of supporting processor for a shader 3.0 model. We should extend instruction's length to support OpenGL ES 2.0 API, so we need more memory size. In this paper, we propose a new instruction form that adopted variable length and unit instruction architecture. This proposed instruction architecture that support to Shader 3.0 model has consist of 32bit unit instructions up to 4 which can be combined for embellishing each other. Therefore, it can execute flexible instruction combination and reduce waste of instruction fields.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.769-779
• /
• 2020

This study investigates the selective fractionation of lignin with uniform structures and lower molecular weight. Lignin solubilization was first performed using a solution of acetic acid (AA) and hydrogen peroxide (HP) (4:1, (v/v)) to form peracetic acid (PAA), which is a strong oxidant. After the PAA-induced solubilization that occurred at 80℃, totally soluble lignin was extracted by ethyl acetate (EA) and divided into organic- and water-soluble fractions. The EA fraction was then fractionated by open-column using three solutions (chloroform-ethyl acetate, methanol, and water) sequentially. With an increase in the solvent polarity during the fractionation step, the molecular weight of the lignin-derived compounds in the fraction increased. Remarkably, some lignin fractions did not have aromatic structures. These fractions were identified as carboxylic acid-containing polymers like poly-carboxylates. These results conclude that the selective production of lignin-derived polymers with specific molecular weight and structural characteristics could be possible through open-column fractionation.

• Water for future
• /
• v.28 no.2
• /
• pp.155-168
• /
• 1995

The present paper discusses the traditional empirical equations of friction factor or cross-sectional mean velocity of open channel flow and suggests the new form of friction factor equation. Dimensional analysis is conducted for the possible forms of traditional empirical equations in order to satisfy the dimensional equality, and new forms of empirical equations are presented with introducing equivalent roughness height. Considering the distribution of friction factor against Reynolds number which has a similar characteristics to that of smooth turbulent flow in circular pipe, the friction factor equation of rectangular open channel flow is developed by modifying the friction factor equation of circular pipe flow for the region of smooth turbulent flow. The equations including the dimensionally-corrected empirical equations are tested against Bazin's laboratory experiments.