• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.35-45
• /
• 2020

Korea's social cooperatives were enacted by law in December 2012. However, it is in the process of being settled and has not been established institutionally. So social cooperatives are failing. The purpose of this study is to reduce these failures. To this end, this study distinguished between co-operatives and social co-operatives. Also, the characteristics and concepts were identified. That is why we want to help our social cooperatives in Korea. The results based on the literature research are as follows. First, in order for domestic social co-operatives to be sustainable, the seven principles of co-operatives must be observed. In particular, the sixth principle is important. It is important to form a social cooperative association and to communicate with local cooperatives. Their communication is less likely to fail because they can share management support information, education, promotion, and strategies. Second, there is a need for a plan that can be applied not only to the government but also to general enterprises in order to support social co-operatives. Third, related policies of the government and the private sector should be designed and managed in an integrated manner to promote social cooperatives. Fourth, public relations should be promoted through campaigns to inform the public that the meaning of social cooperatives is for the public good. In addition, the government needs to build a program that fosters professionals who can foster social co-operatives. In conclusion, it is meaningful that this study suggests possible ways to develop social co-operatives in Korea, and provides support to the Korean government.

• Korean Journal of Ichthyology
• /
• v.23 no.1
• /
• pp.10-20
• /
• 2011

Genetic determinant for metallothionein (MT), a cysteine-rich protein playing essential roles in metal detoxification and homeostasis, was characterized in the Korean bitterling (Acheilognathus signifer, Cyprinidae), an endemic fish species. The full-length A. signifer MT (AsMT) cDNA (551 bp) is composed of a single open-reading frame (ORF) to encode a polypeptide of 60 amino acids containing 20 cysteine residues whose positions are conserved in most cypriniform MTs. At the genomic level, the AsMT (2,593 bp spanning the 5'-flanking region to the 3'-untranslated region) represented a conserved tripartite (three exons interrupted by two introns) structure with AT-rich introns. The upstream regulatory region (-1,914 bp from the ATG initiation codon) of AsMT displayed various sites and motifs for transcription factors involved in the metal-mediated regulation and stress/immune responses. The AsMT transcript was ubiquitously detected in various organs with variable expression levels, where the ovary and intestine showed the highest expression, while the heart and skeletal muscle represented the lowest level. During an exposure to copper (immersion in $0.5\;{\mu}M$ Cu for 48 h), the levels of AsMT transcripts were significantly elevated in the liver (more than 3.5-fold), moderately in the gill, kidney, and spleen (ranging from 1.5- to 2.5-fold), and barely in the brain and intestine. Results of this study could form a useful basis to explore the metal-related stress physiology of this endangered fish species.

• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.499-508
• /
• 2015

The purposes of this study are to investigate elementary students' perception of science classroom through an analysis of students' answer to an open-ended question and to suggest a framework for the analysis of science classroom culture, as the first step to develop an analysis tool for qualitative exploration of science classroom culture. We analyzed 571 responses and developed an analysis framework with six categories (i.e. major factors; power structure of a classroom community; focused domains of the science classroom; student concerns; atmosphere of science classroom; participation form). The details of the six categories can be summarized as follows: (1) major factors were revealed to be practical work, fun, teacher, community and others; (2) the power structure of classroom community was in the order of peer students, teacher, and individual student himself/herself; (3) the focused domains of the science classroom perceived by students were more about affective and behavioral domains than cognitive one; (4) major student concerns were teachers' teaching, having practical work, and the understanding of and the sharing of knowledge and opinions (5) science classroom atmosphere was noisy and pranky but fun and interesting; (6) the students participation forms were to be total participation or voluntary participation or cooperative practice. Through this study, not only suggesting the framework, but we could also get implications for the cultural aspects of science classroom based on the results of data analysis in this study.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.49-58
• /
• 1998

The spawning behavior and early life history of the Korean aucha perch, Coreoperca herzi were studied. The eggs were spawned in a one-layer mass, hanging from the underside of a largy stone and guarded by one male. According to the considerable size difference os eggs in the individual ovaries, it was concluded that they spawns several times within a spawning season of May~June. The ripe eggs were demersal and adhesive, and their diameter were 2.60~3.04mm with several oil globule of 0.10~0.64mm. Hatching in the tank with $19.0{\pm}1.0^{\circ}C.$ in men water temperature started from the 380 hours after fertilization. Newly-hatched larvae were measured 6.45~7.34mm in total length (TL, mean : 6.85mm), and mouth and anus were open. Melanophores were present on the head, around the yolk, and on the dorsal part of the abdominal region. 3 days old larvae were measured 7.00~7.40mm in TL (mean : 7.25mm), and they fed Daphnia sp. and Brachionus plicatilis actively. 6 days old larvae transformed to postlarval stage and they were 7.94~10.10mm in TL (mean : 9.00mm). As yolk sac were nearly absorbed, the caudal notochord flex at 45. Aggregate numbers of all fin rays were completed at over 16.90~19.80mm in TL (30 days after hatching), at which time the larvae reached the juvenile stage. In fifty days old larvae(24.60~27.10mm in TL) were similar in body form, lateral line and color to adult.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.2
• /
• pp.267-284
• /
• 1999

The purpose of this study are 1. Evaluate the degree of knowledge of Vaginal Birth After Cesarean(VBAC) of Korean nurses. 2. To gather and develop educational material for VBAC. The sample was surveyed Korean Nurses knowledge about VBAC, from November 1998 through March 1999. For the data analysis, the SPSS computer program percentage and frequency were used for descriptive statistics. The x2 and the t-test were used to compare the results of the two sample groups. Open questions asked in the survey were sorted out by content, then displayed in chart form. For the education material, the Internet was the main source of information. Information on the Internet was provided by professional doctors and prenatal educational nurses. The results of the survey are as follows: 1. Out of 97 Nurses 15.3% answered that cesarean deliveries do not need to be performed after previous cesarean sections : however. 46.4% answered that cesarean sections must be performed after previous cesarean sections. 2. Of the nurses surveyed 14% had no knowledge or had never heard of VBAC. 3 Nurses did not have questions from patients concerning VBAC was 34.7%. This led to the conclusion that patients either do not have knowledge about VBAC or patients have no interest in the trial of labor. 4, Nurses indicated that their information about VBAC originated from other people's experiences (31%), Nursing School (25%), Media information (9%), and through literature review (6%). This data led to the conclusion that the knowledge about VBAC may not be extensive enough to counsel and guide patients who are willing to endure the trial of labor. 5. Nurses preferred hospital education programs to develop their knowledge concerning VBAC. Based upon survey, the conclusion was made that General Nurses and Maternity Nurses did not have knowledge about VBAC success rates and the possibility of a trial of labor. In order for nurses to help patients make decisions concerning VBAC, nurses have to gam more knowledge through hospital educational programs. Further more, the study suggests that through hospital educational programs, the possibility and importance of VBAC must be emphasized to nurses who work in maternity areas. Second, through prenatal educational programs, the possibility and importance of VBAC must be explained and emphasized to patients who had previous cesarean sections. Third, the clinical pathways of VBAC need to be developed. Fourth, each hospital needs to develop multi-disciplinary teams, consis-ting of obstetricians, risk management/quality management, staff registered nurses, and the director for perinatal services. This team can review cesarean section rates and help to increase the practice of VBAC.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.88-91
• /
• 2002

The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.79-102
• /
• 2009

L/C transaction, the most important issue for the seller and the buyer is the theory of documentary transaction and the theory of strict compliance which are the principles of L/C transactions. According to the leading cases in England and America where the practice of L/C transactions was created and developed, the descriptions of the commodities specified on all the documents which are submitted based on an L/C, should be identical to the descriptions of commodities specified in the L/C. And further, many leading cases of L/C continuously repeat to emphasize strict compliance. However, the recent leading cases in and out of the country show that the principle of strict compliance is being weakened. The leading cases in America show two trends of weakening the principle of strict compliance. That is, on the contrary to strict compliance, tends to apply substantial compliance (which puts more value on the substance of the documents). These leading cases reflect the attitudes of the judicial and the legislative authorization that don't want to approve formal approach to the commercial law. Recently, the Supreme Court of Korea is giving a decision on the principle of strict compliance, "The documents attached to an L/C should strictly comply with the conditions in the L/C, but it doesn't mean that they should be perfectly identical without any mistake in words. In case the bank can understand through reasonable care that a small mistake in words is too trivial to give different meaning or to give damage to the conditions of the L/C, the documents are regarded to comply with the conditions of the L/C. However, the judgment should be based on whether the difference between the documents and the L/C can be admitted by the international standard bank transaction practice or not." This decision tells that the principle of strict compliance is quite much modified so application of this modification can't be ignored. However, from the viewpoint of the party who requests to open an L/C, there is a criticism that a bank's arbitrary judgement can be involved. Therefore, reviewing the original purpose of L/C transactions (activating international transactions), the principle of strict compliance may be thought old-fashioned because it emphasizes a form, but in reality, for prompt transaction and payment, the principle of strict compliance should be observed in L/C transactions. And further, if a legislative device is prepared to systematically compensate for several side-effects, the principle of strict compliance will improve dynamic flow of prompt and low-costly L/C transactions. On the other hand, it will be able to protect the interested parties.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.321-337
• /
• 2018

The characteristics of 124 Phytolacca americana present areas and 88 surrounding absent areas over the country were investigated and compared from July 2016 to Sept 2017. The Phytolacca americana was confirmed as having been nationally distributed and is usually found in roadsides at an altitude of 380 m (26%), forest edges (24%), forests (19%), sunny spots (60%), dry soils (53%), sandy loams (31%) and sand+gravel soils (22%). 321 taxons consisting of 79 families, 209 genera, 289 species, 2 subspecies, 26 varieties and 4 cultivars and 286 taxons consisting of 76 families, 195 genera, 256 species, 2 subspecies, 24 varieties and 4 cultivars were found in the Phytolacca americana present areas and the absent areas, respectively. The relative net contribution degree was found highest in the Phytolacca americana (100) followed by Robinia pseudoacacia (29.4), Humulus japonicus (8.8) and Artemisia princeps (6.0) in the present areas, while it was found highest in Robinia pseudoacacia (100) followed by Humulus japonicus (44.4), Artemisia princeps (35.9), Pueraria lobata (18.6) and Setaria viridis (12.3) in the absent areas. The Raunkier's life form in the present/absent areas was found highest in the therophytes (34%/34%), followed by hemicryptophytes (17%/18%), megaphanerophytes and mesophanerophytes (18%/17%), nanophanerophytes (11%/11%) and geophytes (9%/11%). There was no significant difference in the species diversity between the present (2.141) and the absent (2.124) areas. However, the allelopathic agent and light blocked-out by the Phytolacca americana could possibly inhibit germination and the development of other species; especially, where a difference in species diversity was found high in forests, compared to other habitats (p=0.0605). Accordingly, it is suggested to review possible disturbances of native species habitats in shady spots including forest gaps, although the effect of Phytolacca americana on the ecological system in the suburban open and disturbed areas is not large.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.4
• /
• pp.491-498
• /
• 2018

The cost evaluation for voyage route planning in an ice-covered sea is one of the major topics among ship owners. Information of the ice properties, such as ice type, concentration of ice, ice thickness, strength of ice, and speed-power relation under ice conditions are important for determining the optimal route in ice and low operational cost perspective. To determine achievable speed at any designated pack ice condition, a model test of resistance, self-propulsion, and overload test in ice and ice-free water were carried out in a KRISO ice tank and towing tank. The available net thrust for ice and an estimation of the ice resistance under any pack ice condition were also performed by I-RES. The in-house code called 'I-RES', which is an ice resistance estimation tool that applies an empirical formula, was modified for the pack ice module in this study. Careful observations of underwater videos of the ice model test made it possible to understand the physical phenomena of underneath of the hull bottom surface and determine the coverage of buoyancy. The clearing resistance of ice can be calculated by subtracting the buoyance and open water resistance form the pre-sawn ice resistance. The model test results in pack ice were compared with the calculation results to obtain a correlation factor among the pack ice resistance, ice concentration, and ship speed. The resulting correlation factors were applied to the calculation results to determine the pack ice resistance under any pack ice condition. The pack ice resistance under the arbitrary pack ice condition could be estimated because software I-RES could control all the ice properties. The available net thrust in ice, which is the over thrust that overcomes the pack ice resistance, will change the speed of a ship according to the bollard pull test results and thruster characteristics (engine & propulsion combination). The attainable speed at a certain ice concentration of pack ice was determined using the interpolation method. This paper reports a procedure to determine the attainable speed in pack ice and the sample calculation using the Araon vessel was performed to confirm the entire process. A more detailed description of the determination of the attainable speed is described. The attainable speed in 1.0 m, 90% pack ice and 540 kPa strength was 13.3 knots.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.