• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.391-402
• /
• 1999

Characteristics of composite electrolytes which were prepared by coating a thin film of YSZ (yttria sta-bilized zirconia : (ZrO2)0.92 (Y2O3)0.08) on YDC (yttria doped ceria : Ce0.8Y0.2O1.9) with mixed conductivity have been investigated in order to develop the low-temperature solid oxide fuel cell. The thickness (t) of spin-coated YSZ thin films after the heat-treatment at 600$^{\circ}C$ was increased proportionally to the sol con-centrations (C) while the decrease in its thickness with the spin rate ($\omega$) could be expressed in the e-quation of ln t=9.49-0.53 ln $\omega$(0.99mol//s sol conc.) When the sol concentration and the spin rate being less than 0.99 mol/l and higher than 1000 rpm respectively reliable YSZ/YDC composite electrolytes could be obtained by multi-coating although several micro-cracks were observed in singly coated YSZ film surfaces. The dense YSZ film with a 1$\mu\textrm{m}$ thickness was prepared by coating of 0.99 mol/l YSZ sol five-times at 2000 rpm followed by heat-treatment at 1400$^{\circ}C$ for 2h, The adhesion between YSZ film and YDC substrate was found to be very good. The open circuit voltages of H2/O2 single cell with YSZ/YDC composite electrolytes were 0.79∼0.82 V at 800$^{\circ}C$ and 0.75∼0.77V at 900$^{\circ}C$ The open circuit voltage was inversely proportioned to the thickness ratio of YSZ thin film (1$\mu\textrm{m}$) to YDC substrate(0.28-2.22 mm)

• 한국수소및신에너지학회논문집
• /
• 제8권3호
• /
• pp.101-109
• /
• 1997

We propose a new concept of hydrogen absorbing alloy, "Laves phase related BCC solid solution". It was firstly found among the phases tormed in multicomponent nominal $AB_2$ alloys which consisted of Zr and Ti for the A metal site and 5A, 6A and 7A transition metals for the B metal sites. In these alloys a BCC solid solution often coexisted with a Laves phase. It showed stability of hydrides and reaction kinetics almost identical to intermetallics such as Laves phase alloys. We prepared an almost pure "Laves phase related BCC solid solution" and found that it had a large hydrogen capacity (more than 2 mass%) and fast hydrogen absorption and desorption kinetics at ambient temperature and pressure. This new hydrogen absorbing alloy may open a new era of hydrogen related application such as hydrogen vehicles.

• 한국안전학회지
• /
• 제11권3호
• /
• pp.112-118
• /
• 1996

When fossil fuels are burned they produce CO gas because of incomplete combustion. If the CO gas reacts with the hemoglobin in the red blood cells, it may result in death or sequelae. Generally, the CO gas is eliminated in the form of the $$$CO_2$ gas by the oxidation reaction over the platinum catalyst. In this study, the electrochemical CO removal was investgated by using the solid electrolyte cell reactor, the type of which was represented as reactants$/Pt/Y_2O_3-ZrO_2/Pt/Air$. If the overpotential was applied to the platinum working electrode, the conversion could be changed with the overpotential applied. It was found that the oxidation rate could be increased 2.8 times higher than that of the normal condition, i. e. under open circuit conditions when $P_{co}/P_{O_2}$ was 0.5 and overpotential was 0.9V. From these results, it is concluded that the reactor used in this study is more efficient than conventional catalytic reactors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.178.2-178.2
• /
• 2013

Conventional ultraviolets A,B,C are known to be very important factor of killing, changing surface properties of biological cells and materials. It is of great importance to investigate the influence of extreme ultraviolet (EUV) exposure on the biological cell. Here we have studied high density EUV plasma and its emission characteristics, which have been generated by plasma focus device with hypercycloidal pinch (HCP) electrode under various Ar gas pressures ranged from 30~500 mTorr in this experiment. We have also measured the plasma characteristics generated from the HCP plasma focus device such as electron temperature by the Boltzman plot, plasma density by the Stark broading method, discharge images by open-shuttered pin hole camera, and EUV emission signals by using the photodiode AXUV-100 Zr/C.

• 전자통신동향분석
• /
• 제39권1호
• /
• pp.48-61
• /
• 2024

The integration of high-capacity terrestrial networks with non-terrestrial communication using satellites has become essential to support seamless low-latency services based on artificial intelligence and big data. Tunable light sources have been instrumental in resolving the complexity of channel management in wavelength division multiplexing (WDM) systems, contributing to increased network flexibility and serving as optical sources for long-distance coherent systems. Recently, these light sources have been applied to beam-steering devices in laser communication and sensing applications across ground, aerial, and satellite transport. We examine the utilization and requirements of tunable lasers in WDM networks and describe the relevant development status. In addition, performance requirements and development directions for tunable lasers used in optical interference systems and beam-steering devices are reviewed.

• 대한기계학회논문집B
• /
• 제36권9호
• /
• pp.931-935
• /
• 2012

본 연구에서는 저온형 연료전지와 고온형 연료전지의 작동 및 구성 요소 측면 단점들을 보완하기 위해 중온 영역에서 작동하는 박막 연료전지를 제작하였다. 박막 연료전지는 이트륨이 도핑된 바륨 지르코네이트(BYZ) 전해질과 백금 수소극/공기극으로 이루어져 있으며, 성능은 $350^{\circ}C$에서 측정하였다. 350nm의 두께를 가지는 백금 수소극은 다공성 기판 위에 스퍼터링 기법을 이용하여 증착하였다. BYZ전해질은 펄스레이저 기법을 이용하여 $1{\mu}m$ 증착하였고, 상부에 스퍼터링 기법을 이용하여 200nm의 두께를 가지는 백금 공기극을 증착하였다. 개회로 전압은 약 0.81V이었고, 최대 출력 성능은 11.9mW/$cm^2$이었다.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.81-87
• /
• 2005

[ $BaTiO_3$ ]계 유전체 모재료에 대하여 $Al_{2}O_{3}$와 CaO 조성이 소량 포함된 lithium-borosilicate계 유리 프릿을 $5\~15wt\%$ 적용함으로써 LTCC용 내장 캐패시터로 적용 가능한 조성을 개발하였다. 이를 위하여 먼저, 화학적으로 안정하고 저온소성효과가 탁월한 유리 프릿 조성물을 설계하고 이를 유전체 모재료에 적용하여 저온소성특성 및 유전특성을 평가하였다. $BaTiO_3$ 세라믹스를 모재료로 하는 경우 유리 프릿을 5wt$\%$ 첨가하였을 때 $925^{\circ}C$에서 $95\%$ 정도의 상대밀도 값을 나타내었으며, 이 경우 유전율 990, 유전손실 $3.1\%$의 유전특성을 나타내었다. $(Ba,Ca)(Ti,Zr)O_3$ 세라믹스를 모재료로 하여 유리프릿을 10 wt$\%$ 첨가한 경우는 $875^{\circ}C$의 소결온도에서 상대밀도가 $95\%$ 이상이며 기공율 $0.5\%$ 이하인 소결특성을 나타내었고, 700 이상의 유전율 및 $2\%$ 내외의 유전손실 값을 가지는 것으로 측정되었다.

• 한국분말재료학회지
• /
• 제31권1호
• /
• pp.16-22
• /
• 2024

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and self-powered devices owing to their excellent mechanical durability and output performance. In this study, we design a lead-free piezoelectric nanocomposite utilizing (Ba_0.85 Ca_0.15)(Ti_0.9Zr_0.1)O₃ (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solid-state reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 ㎂, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.72-79
• /
• 2022

Piezoelectric energy harvesting technologies, which can be used to convert the electricity from the mechanical energy, have been developed in order to assist or power the wearable electronics. To realize non-toxic and biocompatible electronics, the lead-free (Ba_0.85Ca_0.15)(Ti_0.90Zr_0.10)O₃ (BCTZ) nanoparticles (NPs) are being studied with a great attention as flexible energy harvesting device. Herein, piezoelectric hybrid nanocomposites were fabricated using BCTZ NPs-embedded poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] matrix to improve the performance of flexible energy harvester. Output performance of the fabricated energy device was investigated by the well-optimized measurement system during the periodically bending and releasing motions. The generated open-circuit voltage and the short-circuit current of the piezoelectric hybrid nanocomposite-based energy harvester reached up to ~15 V and ~1.1 ㎂, respectively; moreover, the instantaneous power of 3.5 ㎼ is determined from load voltage and current at the external load of 20 MΩ. This research is expected to cultivate a new approach to high-performance wearable self-powering electronics.

• 자원환경지질
• /
• 제22권1호
• /
• pp.35-63
• /
• 1989

구룡산(九龍山)(또는 옥천(沃川)) 함(含)우라늄 흑연질점판암(黑鉛質粘板岩)은 옥천대(沃川帶) 서북부(西北部)에 따라 증상(層狀) 또는 부딘상(狀)으로 90km이상(以上) 연장(延長) 분포(分布)한다. 함(含)우라늄점판암(粘板岩)의 오토레디오그라프에 나타나는 퇴적(堆積), 속성(續成), 변성구조(變成構造)는 우라늄과 동시퇴적물(同時堆積物)로서 속성작용과정(續成作用過程)에서 전혀 이동(移動)하지 않고 황성변성(廣域變成) 초기(初期)에 제자리에서 미립(微粒)우라니나이트로 재결정(再結晶)하였음을 보여준다. 동시(同時)에 유기물(有機物)은 미세환장흑연(微細環狀黑鉛)으로 되었다. 라미나구조(構造)의 발달(發達)과 평균(平均) 19.64% C, 2.32% S의 함유(含有)는 함(含)우라늄흑니(黑泥) 퇴적(堆積)의 일반조건(一般條件)으로서의 극(極)히 낮은 퇴적화(堆積比), 고유기물함유(高有機物含有), 염기성황경등을 충족(充足)하였으며 Th/U가 0.07로서 해수원(海水源)임을 뜻한다. 지역별(地域別) CaO, $P_2O_5$의 평균치(平均値)가 매우좁은 범위(範圍)의 일정치(一定値)이며 높은 CaO 평균치(平均値)를 나타내어 전퇴적(全堆積)분지를 통(通)하여 동일(同一) pH(7.8-8.0)조건(條件)의 환경(環境)에서 퇴적(堆積)하였음을 나타낸다. 함(含)우라늄점판암(粘板岩)은 같은 성인(成因)의 타산장(他産狀)에 비(比)하여 미량원소(微量元素) 부화도(富化度)가 매우 높다. 고부화(高富化)의 중요(重要)한 원인(原因)으로서 미량원소(微量元素)의 소스(source)인 해수(海水)의 주기적(週期的) 교체(交替)가 요구(要求)되는데 사이크릭퇴적구조(堆積構造)는 그러한 현상(現象)을 뒷받침하여 준다. 흑니(黑泥)의 성인별(成因別) 구성광물(構成鑛物)과 원소(元素)의 수반관계(隨伴關係)에서 쇄설성광물(鑛物)에는 Si, Al, K, Na, Ti, Zr, Th, Be, B, Li, 유기물(有機物)후락숀에, U, Ni, Cu, Co, Zn, Ag, Mo, Pb, Sn, Cd, S, Fe, V, Cr, Y, 탄산염광물(炭酸鹽鑛物)에 Ca, Mg, Mn, P, Ba가 높은 상관(相關)을 나타낸다. 유기물(有機物)의 우라늄고정심전능력(固定沈澱能力)에 있어 사프로페릭(Sapropelic)형(型)보다 휴믹(Humic)형(型)에서 더 높다. 육성식물(陸性植物)의 분해물(分解物)인 휴무스(Humus)는 고대성(古生代) 중기(中期)에 출현(出現)한다. 우라늄 함유(含有) 흑니(黑泥)는 이 시대(時代)의 형성물(形成物)로서 이런 형(型)의 광상(鑛床)은 생물상(生物相)의 진화(進化)에 규제(規制)된 광화작용(鑛化作用)의 산물(産物)이다.