• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.56-62
• /
• 2001

When polyethylene terephthalate(PET) film specimen were stepwise elongated under tension with various speeds of about 0.5~500 mm/min, the necking area, consisted of transparent and opaque bands, was formed during plastic deformation. Stress oscillation was apparently obtained in the stress-strain curve of above specimen. However, stress oscillation was not obtained in the stress-strain curve of annealing specimen. Microstructure was examined dynamically using an optical microscopy and thermal analysis was carried out in a differential scanning calorimeter at a heating rate of 10${\circ}$/min. Also, orientation and crystallization were examined using monochromatic-pinhole technique and elastic modulus was measured by a dynamic mechanical analyzer in the temperature range of -150~70 ${\circ}$ with the frequency of 1 Hz. Transparent PET products were fabricated by use of the PET pellets annealed at 83${\circ}$ for 30 min in an electric furnace.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.47-55
• /
• 2010

UV-screening agents have some adverse effects that raise consumers' concern. The organic agents often cause irritation and may penetrate into human body while the inorganic agents raise aesthetic issues because they often turn opaque. Organic agents with high molecular weights and nano-sized inorganic agents have been developed respectively to minimize transdermal intrusion into human body and suppress turning opaque. Recently, we reported preparation of powdery UV-screening agents made of polysilsesquioxane, an organic-inorganic hybrid material. Powders would not penetrate into epidermis and organic-inorganic hybrid nature would suppress the opaqueness problem. In this study, we continued our research on this powdery polysilsesquioxane UV-screening agent, SESQUV, regarding its chemical composition, its synergic UV-screening effects when mixed with other organic agents, and its applicability in practical formulation. Results showed SESQUV was promising UV-screening agents useful in sunscreen formulation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.328-335
• /
• 2000

Statement of the problem. Recently an innovative method of fabricating indirect restorations by gold electroforming has been developed. But the bond quality and strength of the gold coping to the porcelain is uncertain. Purpose of study. The purpose of this study is to analyze and evaluate the electroformed gold surface for mechanical bonding between the gold and the ceramic veneering. Methods/material. Electroformed disks were made using electroforming technique. And the surface of the electroformed coping was analyzed after sandblasting, heat-treatment, bonding agent application, opaque porcelain firing with scanning electron microscopy and energy dispersive x-ray analysis. Results. In the analysis with SEM, Sandblasting made the sharp edges and undercuts on the electroformed surface, and after bonding agent application, net-like structure were created on the electroformed surface. In the energy dispersive x-ray analysis it is confirmed that electroformed surface contains some impurities. Conclusion. With the use of sandblasting and bonding agent, electroformed surface seems to be enough to bond with veneering porcelain.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.17-29
• /
• 1996

N-substituted acrylamide hydrogel is reported to have the feature of bing transparent and sensitive enough to response to a temperature stimulus below the temperature of phase transition. Especially at the near of 35 C it becomes shrunk and opaque very quickly. It has also the characteristic of reversing swelling and shrinking. The experiment showed that it is possible to produce a functional gel of super water absorption with the process of free radical polymerizing PVA(polyvinylalcohol) and PAA(polyacrylamide), and crosslinking. The ratio of shrinking and swelling caused by copolymerization rises 10% to 80% at the each temperature of 20 C, 30 C, 40 C, respectively. Phase transition temperature of this gel by copolymerization is50 C while that of ordinary N-substituted acrylamides is between 32~35 C. This temperature reaches the rearing limit of animals and plants so that volumetric transition polymer gel can be ulilized in varying fields such as agriculture/gardening which are water-using field, on-off switch sensing temperature and volumetric variation, processing of liquid wastes and civil engineering works, architecture and electronics. We have no doubt that this material will be the high-functional resin in the hi-tech age of the near future.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1591-1594
• /
• 1987

The Scanning Acoustic Microscope(SAM) is an image device which can display the small opaque material or the interior of solid. This paper showed the design of the acoustic lens which is an important factor of the Scanning Acoustic Microscope, and analyzed the performance of the acoustic lens. Finally, I experimented the image processing of the interior of solid through the Scanning Acoustic Microscope and the change of the acoustic image (resolution,contrast) by the change of F/number.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.138-143
• /
• 2000

A new method of measuring the thermal diffusivity of solid material at room temperature with photothermal displacement method is proposed. The influence of the parameters on phase lag was studied. From the minimum position of phase of measured deflection with respect to the pump beam the thermal diffusivity of the materials can be obtained. The minimum position of phase is determined using multiparameter least-square regression fitting. The experimental values for different samples obtained by applying new method are in good agreement with the literature values.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.212-216
• /
• 2007

Predicting microcracking properties of the composite laminates in nonuniform stress conditions was the subject in this paper. The uniform stress field meant the stresses were independent of the width direction. The material was the 954-2A/IM7 laminates containing a central hole. Microcracks initiated at the edge of the hole and propagated into the laminate. Because the tensile stress concentration decreased with distance, the microcracks were arrested before the edge of the laminate. Because carbon fiber composites were opaque, a x-ray method was used to detect the length of the propagating microcracks. The microcracking at the near edge of the hole could be reasonably predicted by considering the local laminate stresses and the microcracking toughness measured in unnotched laminates. However, the date away from the hole did not agree with the predictions. The local microcrack density was always much higher than that predicted by the local laminate stress.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.535-540
• /
• 2016

Effects of compositions and sintering conditions on glaze properties are shown in the diagram constructed by using the unity molecular formula (UMF) method in this study. Glossy characteristics of glaze were clearly differentiated by compositional area in the diagram and sintering process. As alumina and silica contents were increased, texture of the glaze became rough and opaque, akin to having been devitrified or underfired. The correlation between glossiness and surface roughness was found to be non-linear and inversely proportionate. Crystalline phases formed in the glaze were also influenced by the compositional area. Due to the high concentration of CaO, anorthite and wollastonite were formed depending on the compositions. Hardness was increased with an increase of alumina and silica concentrations in the glaze.

• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2006

The thermal effect of a transparent insulated opake wall with solar energy was investigated theoretically. The heat gain through transparent insulated opake wall was studied for relative simple conditions. The stationary heat transport effect was studied for layer which is built on the opake wall. This study shows that a relative low solar radiation intensity causes a great heat reduction through the transparent insulated opake wall.

• Journal of the Korean Society of Costume
• /
• v.59 no.10
• /
• pp.151-171
• /
• 2009

The purpose of this study is to analyze the formative relationship between clothes and hat with the works by Philip Treacy, the designer who raised hats to one of important fashion accessories. The method to analyze the relationship between clothes and hats was the formative analysis by Marian L. Davis and Marilyn R. Delong. The results suggest that clothes and hat had an organic relationship, and a hat style was changed with formative elements of clothes. Clothes and hats by Philip Treacy were analysed in the aspects of Form, Color, Material, and Decoration. As a result, hats by Philip Treacy were mainly designed by the relationship between whole types without a closed line and showed geometric and formative forms, similarly harmonized with clothes. To highlight hats, the achromatic colors such as black and gray were used. Besides clothes and hats were coordinated by the same colors, but contrary colors were used to express a strong image. Felt or straw materials maily used to express a formative and fixed form were well matched with smooth, opaque, and lusterless materials such as wool. Also when transparent materials were used for hats, lace was used for clothes. A hat made of acrylic was matched with clothes made of glossy vinyl coating materials. Decoration was mainly removed but if used, feather decoration was added to clothes.