• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.111-119
• /
• 2002

Gears are essential elements for mechanical power transmission. Geometric precision is the main factor for characterizing gear grade and qualify. Gear pitch is one of the crucial measurements, which is defined as a distance between two adjacent gear teeth. It is well-known that variability in gear pitches may causes wear-out and vibration noise. Therefore maintaining pitch errors at a low level plays a key role in assuring the gear quality to customers. This paper is concerned with a case study, which presents a computerized system for Inspecting pitch errors in a gear machining process. This system consists of a PC and window-based programs. Although the start and stop is manually accomplished, the process of measuring and analyzing pitch data is automatically conducted in this system. Our purpose lies in reducing inspection cost and time as well as Increasing test reliability. Its operation is briefly illustrated by example. Sometimes a strong autocorrelation is observed from pitch data. We also discuss a process monitoring scheme taking account of autocorrelations.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.181-191
• /
• 2007

Logistics creates a boom in accordance with the recent new technique's development along with the recent RFID/USN of ubiquitous computing technique. The wave of 4PL(Fourth Party Logistics) that added the strategic consulting based on new IT techniques to logistics outsourcing through existing 3PL service with is a great issue. Moreover, the customer enterprises which contained manufacturers and distributors need the one stop service, therefore a method for effectively dealing with global logistics' environment changes is needed. Above all, a development of the 4PL system with RFID is very urgent. We developed the RFID u-4PL system progressed more than the present system, in which we applied many international standards. Finally, we constructed the web service based on Web 2.0 because of important condition of 4PL.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.87-95
• /
• 2007

Logistics creates a boom in accordance with the recent new technique's development along with the recent RFID/USN of ubiquitous computing technique. The wave of 4PL(Fourth Party Logistics) that added the strategic consulting based on new IT techniques to logistics outsourcing through existing 3PL service with is a great issue. Moreover, the customer enterprises which contained manufacturers and distributors need the one stop service, therefore a method for effectively dealing with global logistics' environment changes is needed. Above all, a development of the 4PL system with RFID is very urgent. We developed the RFID u-4PL system progressed more than the present system, in which we applied many international standards. Finally, we constructed the web service based on Web 2.0 because of important condition of 4PL.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.459-467
• /
• 2017

An urban railway power substation consists of three thyristor dual converters. Two converters are connected to up and down trolley line to supply the electric energy or feed the regenerative energy back to the distribution. When the two converters break down, the remaining converter is used in an emergency. One thyristor dual converter system (TDCS) manages the energy of two or three railway stations. If the TDCS fails, the trains stop operating. To solve the problem, this paper proposes the three parallel operation control algorithm of thyristor dual converter system using the emergency converter. The broken TDCS can be replaced by the emergency converter in other TDCS. The effectiveness of this proposed control is verified by simulation.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.210-218
• /
• 1998

The ATO(Automatic Train Operation) System is used for train operation instead of drivers. It is interfaced with TCMS(Train Control and Monitoring System) and ATC/TWC system in the train and wayside facilities. In this paper describes configuration of ATO, specification of ATO hardware, construction of ATO software and the algorithm fur automatic train speed regulation in the carborn ATO system. ATO Application Software is consist of ART, SPR, REG, SRV and PSM tasks. ART task is main control part of the ATO that determine ATO control, ATO mode, state transition. SPR determine speed reference according to train motion status, track data, train data and restricted train speed. REG task regulated train speed form the starting of one station to the precision stop at the other station under the result of ART and SPR tasks. In this paper, a algorithm for the train speed regulation while running is described.

• Carbon letters
• /
• v.2 no.2
• /
• pp.113-119
• /
• 2001

The advanced method for $CO_2$capture is currently one of the most important environmental issues in worldwide and it is therefore necessary to have available technologies, which minimize the discharge of $CO_2$ including Carbon-14 from nuclear facilities into the atmosphere. A key aspect of this work is to provide the technically principal data required to improve a $CO_2$ removal system for the utilization of regenerative sorbent use, specifically include suggestions regarding its modified column design (parallel dual-bed assembly), stop-restart operation and the economic feasibility of sorbent use. The removal performance of soda lime and the effects of relative humidity (RH) and packing bed-depth (BD) on $CO_2$ removal were investigated. In a single-bed, it revealed that the utilization of soda lime for $CO_2$ removal at line velocity of 13 cm/sec and bed depth of 12 cm increased with the increased relative humidity up to 85%. However, in the parallel dual-bed assembly applied with the stop-restart operation, a maximum utilization rate of soda lime for $CO_2$ removal was obtained even at 55% of RH and 8 cm of BD, specifically the utilization rate of soda lime by using this $CO_2$ removal assembly was about two-fold superior to that in a single-bed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2783-2790
• /
• 2010

In this paper, we first review LDPC codes in general and a belief propagation algorithm that works in logarithm domain. LDPC codes, which is chosen 802.11n for wireless local access network(WLAN) standard, require a large number of computation due to large size of coded block and iteration. Therefore, we presented three kinds of low computational algorithms for LDPC codes. First, sequential decoding with partial group is proposed. It has the same H/W complexity, and fewer number of iterations are required with the same performance in comparison with conventional decoder algorithm. Secondly, we have apply early stop algorithm. This method reduces number of unnecessary iterations. Third, early detection method for reducing the computational complexity is proposed. Using a confidence criterion, some bit nodes and check node edges are detected early on during decoding. Through the simulation, we knew that the iteration number are reduced by half using subset algorithm and early stop algorithm is reduced more than one iteration and computational complexity of early detected method is about 30% offs in case of check node update, 94% offs in case of check node update compared to conventional scheme. The LDPC decoder have been implemented in Xilinx System Generator and targeted to a Xilinx Virtx5-xc5vlx155t FPGA. When three algorithms are used, amount of device is about 45% off and the decoding speed is about two times faster than convectional scheme.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.51-64
• /
• 1999

This study is on the focus of the cost-effective and time-effective in the BCTOC which commenced the On Dock Termainal System in 1998 for the first time in Korea. On this process of study two categories should be considered : (1) Improvement on Business Process (2) Improvement on Information Technology. With these two accesses a new future-oriented and prospective model could be put on our hand as follows. (1) Improvement on Business Process \circled1Consistency of container In-Out Operation \circled2Simplicity of Rate appraisal \circled3Unified operation on Billing and Request (2) Improvement on Information Technology \circled1Scale up the Information Application \circled2Constructing an one-spot simultaneous Information Holding System \circled3Combination of Internet and Integrated Database System.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.243-249
• /
• 2007

In this paper we introduce a system that assists news reporters to easily edit source video anywhere, and transfer the result from a remote site to the station. Presently reporters are bothered to edit source materials, compress and transfer using several separate tools. Moreover such tools have lots of too complicated features to use only for news production. We have integrated file sending and video editing functions together for seamless workflow. News programs usually need promptness in production. For this reason our system is designed to make it possible the one-stop production of news items outside the TV station. Also the system reflects the demands of field workers, that is, easy usage for the beginner and features for speedy news production. One of the most focused is that the reliability of the system is guaranteed in the process of transfer. To achieve this end, we have implemented several error-resilient schemes for unexpected network errors. Our system consists of remote laptop editing terminals and a newsgathering server. DV-format based editing and analog-to-DV converting device are adopted to capture video from not only lightweight DV camcorders but also old-fashioned ENG cameras into laptop computers. We expect that news reporters and cameramen can take terminals anywhere the Internet is available and both editing and sending will be done on the spot. This will help increase the competitive power of our news production.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.146-153
• /
• 2008

Integrated humidity sensor system with two stages operational amplifier has been designed and fabricated by $0.8{\mu}m$ analog mixed CMOS technology. The system (28 pin and $2mm{\times}4mm$) consisted of Wheatstone-bridge type humidity sensor, resistive type humidity sensor, temperature sensors and operational amplifier for signal amplification and process in one chip. The poly-nitride etch stop process has been tried to form the sensing area as well as trench in a standard CMOS process. This modified technique did not affect the CMOS devices in their essential characteristics and gave an allowance to fabricate the system on same chip by standard process. The operational amplifier showed the stable operation so that unity gain bandwidth was more than 5.46 MHz and slew rate was more than 10 V/uS, respectively. The drain current of n-channel humidity sensitive field effect transistor (HUSFET) increased from 0.54 mA to 0.68 mA as the relative humidity increased from 10 to 70 %RH.