• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.392-406
• /
• 2004

The purpose of this study is to recognize of the size conditions of ready to wear skirts and analyze the patterns of them so that some educational patterns can be complemented. For this purpose, the investigation of the size conditions was focused on the body sizes and products sizes of the care labels. The patterns of them produced through CAD have been classified into 24 items for the effective and practical analysis. Thus, 9 brands were selected and the basic skirts marketed in 2002 spring were analyzed. The results were as follows. 1. Designs of the backs of the basic skirts produced by 9 brands have the similar designs with two darts. Regarding the designs of the front, 6 brands of them have the designs with no darts, 3 of them have the one with two darts. Designs of waists are composed of low waists and round belts. 2. Regarding the waist circumference as the basic composing elements of skirts, 55.6% of the patterns have the composition of the styles with larger front than the back but 33.3% of them have the same front as back. As to the hips, 77.8% of them have the composition of the patterns with larger back than the front. As for the comparison of waist lines, 55.6% of them have lower front lines than the back lines. 3. Regarding darts placement, it was moved to the side lines from the middle of 1/2 of waist lines, dart intake was 1.8-2.4㎝, the length of the front darts was 7.8-9.5㎝, and the length of the back darts 8.4-11.1㎝ 4. The results of wearing-tests by the sensory evaluation, it showed that almost all the items of the results were satisfactory.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.173-175
• /
• 2016

Chondroid syringoma is a rare mixed tumor of the skin which is composed of both mesenchymal and epithelial cells. Its incidence at less than 0.1% and is frequently located on the head and neck. Chondroid syringoma is easily confused with epidermal cysts. Since malignant forms of chondroid syringoma have been reported, accurate and timely diagnosis is important for proper management. We report clinical and histological features of chondroid syringoma in 5 patients treated at our institution. In most of the cases, chondroid syringoma presented as a round, firm, nodular or cystic lesion that had well marginated heterogeneity in sonography. Clinically, all of the lesions were removed by simple excision. Microscopically, all five tumors were well circumscribed and consisted of epithelial, myoepithelial, and stromal components. The epithelial component formed tubules lined by one or more rows of eosinophilic epithelial cells. The outer layer of tubules appeared to be flattened myoepithelial cells. The stroma is myxoid and contained spindle shaped myoepithelial cells. We expect that the clinical, sonographic, and histological data from our report may help clinicians who are confronted with various kinds of analogous facial lesions to decide the most proper management for their patients.

• Survey Research
• /
• v.11 no.2
• /
• pp.141-160
• /
• 2010

This study aims to analyze the usefulness of the survey procedures developed for telephone surveys using a random sampling method. We conducted a telephone survey of residents in a local area from October 26 to November18,2009. We applied random sampling procedures with five call-backs. Particular attention was given to the conversion of refusals. Out of 2,454 phone numbers, we succeeded in getting responses from 637 numbers. The absence of residents was the primary cause of non-response. We received responses from 45.7% of those with whom we successfully made contact. One finding of this study is that, contrary to our initial expectations, call-backs do not significantly increase the percentage of responses from young people. Also we cannot find any significant differences in responses to various questions between the responses received from the first round of calls and later responses. However, these results are not conclusive; another survey may produce different results. Therefore, further research is needed.

• Journal of architectural history
• /
• v.15 no.5
• /
• pp.41-56
• /
• 2006

Signal fire was a communication system which deliver urgent news by smoke and light. It informed the condition of the border to the central government and the military base rapidly. This research was to analyze the border signal-fire which is the main facility of military protective duty for safety of sea side in chosun dynasty. The results of this research were described separately as follows. 1. The border signal-fire has three types of facility layout, The majority was one-site, near two-site, separate type. The majority was near two-site type. 2. Plan configuration of signal-fire stand which is separated with circle, oval, round-rectangular and rectangular type roughly was constructed with circle type generally. Four types of signal-fire stand was observed in southern and western sea side impartially. However, in eastern side, circle type of signal-fire stand was mainly found. Therefore, regional characteristics could be considered partially. 3. The height of signal-fire stand was about 8~10m. The diameter of combustion chamber on the signal-fire stand was 2~3m in circle type, and the dimension of rectangular type was about $1.9{\times}1.9{\sim}3.2{\times}3.0m$. 4. Building base that protect ground moisture and infilteration of rainfall was found in 10 border singal-fire, the height of it was about 0.3m~2.5m.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.95-109
• /
• 2011

The building for the Sutra appeared as the Sutra-belief became popular in the early years of the Koryo Dynasty. According to the written documents, there were two types of apparatus to keep sutras, one by fixing the cabinet to the wall and the other by rotating the cabinet at the center of the hall. There are no remains. Recently, at the excavation of the site of the Yeongguk Temple (寧國寺) in the Chungcheong Prevince (영동군), a building which was presumed as the Sutra Hall was recovered at the side of the Main Hall. At the center of the building, of 6meters width and 6meters depth, there was a large stone which had a round trace which was presumed to supporting the rotating sutra-case cabinet. By examining the concerned situations, this building was concluded as the Sutra Hall of the temple. The Yeongguk Temple had a close relationship with the royal household. Budddhist monk Gwangji, son of the 16th King Yejong was lived at the Temple. the tomb of King's advisory priest Wongak was also erected at the Temple. Two monks were well known as the defender of the Sutra. The Sutra Hall of the Yeongguk Temple regarded as a significant example which showed us how the archtectural aspect of the Sutra Hall was shaped in the Koryo Dynasty. It could be said that revealing the architectural aspect of the Stura Hall will help revealing the Buddhist architecture of the Koryo Dynsty which is veiled in many field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.830-836
• /
• 2006

One of the seminal operation parameters of AODV is the node-to-node travel time of data, which is currently set to fixed value of 40 ms in the RFC3561 and widely used to compute other parameters such as the expected round-trip time of the connection setup message, etc. We have naturally thought the network performance could be improved by dynamically varying the node-to-node travel time with respect to the traffic condition in the networt rather than using the fixed value, which motivates this work. To this end, we apply the idea of using timestamp; every node places the current time in the message before sending it out, and the receiver node computes the node travel time based on the moving average algorithm by considering not only the current value but also the previous ones in an accumulated and exponentially decreasing fashion with time. We evaluate the performance of the proposed scheme in respect of the number of RREQ messages generated, throughput, and delay as a function of traffic load and node mobility, and compare the result with the original AODV scheme. The results show that the proposed scheme presents noticeable performance improvements, expecially under the condition of high node mobility and high traffic load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.454-464
• /
• 2002

In the ATM-PON (Asynchronous Transfer Mode-Passive Optical Network), the downstream cell transmitted by an OLT is broadcast to all ONUs. The ONU receives selectively its own cells by VP filtering. On the other hand, the upstream cell can be transmitted by ONU in the case of receiving a grant from the OLT. After providing the grant to an ONU, the OLT expects the arrival of a cell after an elapse of the equalized round trip delay. ITU-T G.983.1 recommends that one bit error is allowed between the expected arrival time and the actual arrival time at the OLT. Because the ONU processes the different delay to each type of grant (ranging, user cell, and mimi-slot grant), it is not simple to design the transmission part of ONU. In this paper, we implement a grant processor which provides the delay accurately in the ONU TC chip with the FPGA. For the given equalized delay, it deals with the delay for the cell, the byte, and the bit unit by using the shift register, the byte counter, and the D flip-flop, respectively. We verify the operation of the grant processor by the time simulation and the measurement of the optical board output.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.156-163
• /
• 2002

Hollow core slabs generally have not been used for a bridge or a parking slab in Korea. In this study, high performance hollow core slabs, which have been the most thick one in domestic are re-designed and examined for practical use. Flexural tests were performed on four 315mm deep hollow core slabs to investigate adaptability for high vehicle live loadings and composite action with topping concrete. The precast slabs were pre-tensioned with ten strands of 1/2 inch diameter at the lower of slab and four strands of 1/2 inch diameter at the upper of slab, and cast with 80 mm deep topping concrete. Tested hollow core slabs showed ductile failure behaviors which were conformed to the current Ultimate Strength Design Method for a span of 10m up to the live load of 1,000 kgf/㎡. The rectangular md round shear cotters which were used for the composite action between precast and topping concrete, developed sufficient strengths because cracking, even micro had not been developed at the end of slabs up to the pure flexural tensile failure.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.93-100
• /
• 2018

PURPOSE. The purpose of this study was to determine the changing frequency of a diamond bur after multiple usages on 3 different surfaces. MATERIALS AND METHODS. Human premolar teeth (N = 26), disc shaped direct metal laser sintered CoCr (N = 3) and zirconia specimens (N = 3) were used in this study. Groups named basically as Group T for teeth, Group M for CoCr, and Group Z for zirconia. Round tapered black-band diamond bur was used. The specimens were randomly divided into three groups and placed with a special assembly onto the surveyor. 1, 5, and 10 preparation protocols were performed to the first, second, and third sub-groups, respectively. The subgroups were named according to preparation numbers (1, 5, 10). The mentioned bur of each group was then used at another horizontal preparation on a new tooth sample. The same procedure was used for CoCr and zirconia disc specimens. All of the bur surfaces were evaluated using roughness analysis. Then, horizontal tooth preparation surfaces were examined under both stereomicroscope and SEM. The depth maps of tooth surfaces were also obtained from digital stereomicroscopic images. The results were statistically analyzed using One-Way ANOVA, and the Tukey HSD post-hoc tests (${\alpha}=.05$). RESULTS. All of the groups were significantly different from the control group (P<.001). There was no significant difference between groups Z5 and Z10 (P=.928). Significant differences were found among groups T5, M5, and Z5 (P<.001). CONCLUSION. Diamond burs wear after multiple use and they should be changed after 5 teeth preparations at most. A diamond bur should not be used for teeth preparation after try-in procedures of metal or zirconia substructures.

• ALGAE
• /
• v.21 no.1
• /
• pp.109-124
• /
• 2006

Responses to various types of mechanically induced wounding were followed in the giant-celled Caulerpalean species, Derbesia tenuissima, using time-lapse video-microscopy. Gametophyte vesicle cells. Puncture wounding: the gametophyte cell seals the puncture in 5 min. This is followed by cycles of ruptures and sealing, ending with full recovery in 24 hrs. Cut wounding: the protoplast immediately retracts away from the wall and reforms an intact, deflated protoplast that expands to fill the original cell within 21 hrs. Crush wounding (internal). When retained within the cell wall many protoplast fragments condense, round up, and coalesce; the reconstituted protoplast expands until it attains complete recovery, filling the original cell shape in 12 hrs. Crush wounding (external). Protoplast fragments extruded from the crushed cell are more numerous and smaller taking longer to recover. Most fragments become spherical, transforming into small viable cells capable of reproduction in several days. Sporophyte filaments. Crush wounding creates many small fragments that initially condense, coalesce and then expand within the wall to restore a complete filament with normal cytoplasmic streaming within 5 hrs. Reproduction: gametophyte. Our culture isolates produce more females than males (30:1). Gametangia develop one day before discharge that occurs explosively (1/6 sec) at first morning light. The vesicle cell forms successive gametangia every 14 days. Sporophyte. Each sporangium develops on a lateral branch that becomes isolated by the creation of successive basal plugs. After cytoplasmic cleavage and differentiation the stephanokont spores are discharged. The spores settle quickly and germinate forming gametophyte cells.