• Proceedings of the Korean Geotechical Society Conference
• /
• 1991.10a
• /
• pp.348-361
• /
• 1991

When reinforcing strip footing on a sand 8round with reticulated root piles, reinforcing effect depends on the length , number, cross sectional area, penetration angle, spacing, and Young's modulus of piles. the mode of action of reinfocement tendons in soil isn't one of carring developed tensile stresses but of anisotropic(uni-directional) reduction or even supression of one normal strain rate. R. H. Bassett and N. C. Last proposed that the reinforcement should be located on the direction of minor strain rate which coincides with the tensile strain rate in the velocity characteristics. Based on this proposal the author carried out a series of 2 - dimentional finite element analysis which varies the parameters mentioned above.

• The Korean Journal of Cytopathology
• /
• v.12 no.1
• /
• pp.57-60
• /
• 2001

Fine needle aspiration cytology of the cervical lymph node was performed in a 63-year-old man who had had an orchiectomy for seminoma one year ago. The tumor cells were arranged in loose clusters, occasional sheets, or single cells. The nuclei were round to ovoid with fine or reticular chromatin, and had one or more prominent nucleoli. These cells were intermingled with lymphocytes in a characteristic foamy, lacelike background. Documented reports of the cytologic appearance of the seminoma are rare, especially in the metastatic lesion. The diagnosis of primary gonadal seminoma by fine needle aspiration cytology is probably not indicated since the treatment of primary gonadal tumor requires surgical resection. Because of the characteristic cytologic features, fine needle aspiration cytology may be helpful in evaluation of the extent of tumor spread in the patients with testicular tumors.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.156-163
• /
• 2009

Retail space itself could be one of the marketing strategies, through creating space, and communicating brand identity. Especially for innovative products, such as mobile technology products, store is not just to sell products but to provide experiences so that users can fudge usefulness of products and reduce uncertainties to adopt the products. The purpose of this study is to investigate how environmental features and physical artifacts contribute to promote experiences of innovative products in stores and how physical environment help to establish brand identity. For this study, site visits, observation, and literature review were conducted. For case studies, three retail spaces (Apple, Iriver, Sony) and one service space(TTL) were selected. Compared to the service space, three retail spaces have more transparent and open store front design characteristics. For the experiences of shoppers, products displayed in a radial shape, round shape, column shape, and around peripherals of the stores. A service oriented space, TTL zone is differentiated from three retail spaces in terms of layout, store front design, and experience areas. Compared to the traditional stores selling innovative products, the case stores showed more warm atmosphere using various shape, wood materials, lighting fixtures and furniture.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.5
• /
• pp.563-573
• /
• 2015

For hard rock subsea tunnels the most challenging rock mass conditions are in most cases represented by major faults/weakness zones. Poor stability weakness zones with large water inflow can be particularly problematic. At the pre-construction investigation stage, geological and engineering geological mapping, refraction seismic investigation and core drilling are the most important methods for identifying potentially adverse rock mass conditions. During excavation, continuous engineering geological mapping and probe drilling ahead of the face are carried out, and for the most recent Norwegian subsea tunnel projects, MWD (Measurement While Drilling) has also been used. During excavation, grouting ahead of the tunnel face is carried out whenever required according to the results from probe drilling. Sealing of water inflow by pre-grouting is particularly important before tunnelling into a section of poor rock mass quality. When excavating through weakness zones, a special methodology is normally applied, including spiling bolts, short blast round lengths and installation of reinforced sprayed concrete arches close to the face. The basic aspects of investigation, support and tunnelling for major weakness zones are discussed in this paper and illustrated by cases representing two very challenging projects which were recently completed (Atlantic Ocean tunnel and T-connection), one which is under construction (Ryfast) and one which is planned to be built in the near future (Rogfast).

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.

• Clinical and Experimental Reproductive Medicine
• /
• v.20 no.2
• /
• pp.177-181
• /
• 1993

Endometriosis involving sites outside the pelvic cavity is a relatively uncommon occurrence and its frequency is cited as being less than one percent of all occurences of endometriosis. Sites previously reported in literature have described involvement of the extraperitoneal portion of the round ligament, the rectosigmoid, the appendix, and the ileum. Other more distal sites reported to have been found to have endometriosis lesions include the inguinal ligaments, the umbilicus, abdominal incisional wounds, thoracic lesions involving the pleura or diaphragm which may result in catamenial pneumothorax, the kidneys, and vulvar episiotomy wounds. Endometriosis have even been reported to occur in males. In this presentation, three cases of endometriosis, two involving the vulvar area and one involving a Pfannenstiel incision wound, is presented with a review of the pertinent literature in order to discuss its etiology, pathology, diagnosis and treatment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.353-360
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.215-222
• /
• 2001

Pathogenicities of the five BBWV isolates were differentiated by the reactions on the 29 host plants including Chenopodium amaranticolor. Three specific ultrastructures were observed in cells infected with BBWV The first ultrastructure was the tube made of $1\sim2$ layers of virus particles. The second one was the comb structure consists of round and angled structures. The last one was the membrane proliferation in the cytosol.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.