Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

Main challenges for deep subsea tunnels based on norwegian experience

  • Nilsen, Bjorn (Norwegian University of science and Technology (NTNU))
  • Received : 2015.09.11
  • Accepted : 2015.09.25
  • Published : 2015.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

For hard rock subsea tunnels the most challenging rock mass conditions are in most cases represented by major faults/weakness zones. Poor stability weakness zones with large water inflow can be particularly problematic. At the pre-construction investigation stage, geological and engineering geological mapping, refraction seismic investigation and core drilling are the most important methods for identifying potentially adverse rock mass conditions. During excavation, continuous engineering geological mapping and probe drilling ahead of the face are carried out, and for the most recent Norwegian subsea tunnel projects, MWD (Measurement While Drilling) has also been used. During excavation, grouting ahead of the tunnel face is carried out whenever required according to the results from probe drilling. Sealing of water inflow by pre-grouting is particularly important before tunnelling into a section of poor rock mass quality. When excavating through weakness zones, a special methodology is normally applied, including spiling bolts, short blast round lengths and installation of reinforced sprayed concrete arches close to the face. The basic aspects of investigation, support and tunnelling for major weakness zones are discussed in this paper and illustrated by cases representing two very challenging projects which were recently completed (Atlantic Ocean tunnel and T-connection), one which is under construction (Ryfast) and one which is planned to be built in the near future (Rogfast).

Keywords

References

  1. Karlsson, K.I. (2008), Highway 64, the Atlantic Ocean tunnel, leakage zone 230 m below sea level. Proc. Norwegian Tunnelling Conf., Oslo 2008. Norwegian Tunnelling Society (NFF), Oslo, pp. 11.1-11.16 (in Norwegian).
  2. Moen, P.A. (2011), Rockma - use of MWD as tool in tunnel production. Norwegian Public Roads Administration, Memo, p. 3 (in Norwegian).
  3. NFF (2008), Heavy rock support of underground excavations. NFF-Handbook No. 5, Norwegian Tunnelling Society (NFF), p. 72 (in Norwegian).
  4. NFF (2009), Subsea tunnels. NFF-Publication No. 18, Norwegian Tunnelling Society (NFF), p. 107.
  5. Nilsen, B., Henning, J.E. (2009), Thirty years of experience with subsea tunnels. Proc. 5th Symp. Strait Crossings 2009. Trondheim, Norway, pp. 35-44.
  6. Nilsen, B., Palmstrøm, A. (2013), Methodology for predicting and handling challenging rock conditions in hard rock subsea tunnels. Proc. Int. Symp. on strait crossings, Bergen 2013.
  7. Nilsen, B. (2014), Characteristics of water ingress in Norwegian subsea tunnels. Rock Mechanics and Rock Engineering, Springer, Vol. 47, pp. 933-945. https://doi.org/10.1007/s00603-012-0300-8